'13-14 Cluster into '10-12 car (with TrackApps) retrofit
#1822
Mach 1 Member
Schematic for the Analog input for the BB is up. This is untested! But it should get us started.
This will allow for 0-12v input into the BB 3.3 analog input. Of course a scalar will have to be written in code for this.
I will order the parts and test as soon as they get in. Feel free to reuse this design in your own projects.
This will allow for 0-12v input into the BB 3.3 analog input. Of course a scalar will have to be written in code for this.
I will order the parts and test as soon as they get in. Feel free to reuse this design in your own projects.
Last edited by zeroaviation; 6/4/14 at 08:02 AM.
#1825
I am selling my Black Box, modified directional cruise control switch and wires with pins needed to make the directions steering wheel switch work. I wrote up a detailed install that you can follow to make the gauges work within the new LCD gauge cluster. If you need help with the install I can walk you through it on the phone or install everything for you for a small fee if you are in California. $350 for everything listed or $400 if you bring your car and I install it for you. I'll reprogram your PATS on your vehicle too for no cost ($90 value).
All you need is to buy a Premium, Boss, or Shelby LCD cluster.
FYI, if you do not install the 2013 ABS module, track apps will not work. The ABS module cost $194 plus shipping from Tousley Ford.
PM with any questions, I take PayPal and shipping will be via flat rate USPS ($15).
All you need is to buy a Premium, Boss, or Shelby LCD cluster.
FYI, if you do not install the 2013 ABS module, track apps will not work. The ABS module cost $194 plus shipping from Tousley Ford.
PM with any questions, I take PayPal and shipping will be via flat rate USPS ($15).
Last edited by BlueEyedSnake; 6/5/14 at 08:05 PM.
#1826
Mach 1 Member
I am selling my Black Box, modified directional cruise control switch and wires with pins needed to make the directions steering wheel switch work. I wrote up a detailed install that you can follow to make the gauges work within the new LCD gauge cluster. If you need help with the install I can walk you through it on the phone or install everything for you for a small fee if you are in California. $350 for everything listed or $400 if you bring your car and I install it for you. I'll reprogram your PATS on your vehicle too for no cost ($90 value).
All you need is to buy a Premium, Boss, or Shelby LCD cluster.
FYI, if you do not install the 2013 ABS module, track apps will not work. The ABS module cost $94 plus shipping from Tousley Ford.
PM with any questions.
All you need is to buy a Premium, Boss, or Shelby LCD cluster.
FYI, if you do not install the 2013 ABS module, track apps will not work. The ABS module cost $94 plus shipping from Tousley Ford.
PM with any questions.
LEXiiON
#1829
Mach 1 Member
I am selling my Black Box, modified directional cruise control switch and wires with pins needed to make the directions steering wheel switch work. I wrote up a detailed install that you can follow to make the gauges work within the new LCD gauge cluster. If you need help with the install I can walk you through it on the phone or install everything for you for a small fee if you are in California. $350 for everything listed or $400 if you bring your car and I install it for you. I'll reprogram your PATS on your vehicle too for no cost ($90 value). All you need is to buy a Premium, Boss, or Shelby LCD cluster. FYI, if you do not install the 2013 ABS module, track apps will not work. The ABS module cost $194 plus shipping from Tousley Ford. PM with any questions, I take PayPal and shipping will be via flat rate USPS ($15).
#1831
GT Member
So where has everyone been getting the clusters lately? Been doing a search and have not found any online yet. Does anyone have an estimated cost on this whole process? I have an auto kona blue 2012 I am really wanting to do this on. I have been following this and another post....
#1832
So where has everyone been getting the clusters lately? Been doing a search and have not found any online yet. Does anyone have an estimated cost on this whole process? I have an auto kona blue 2012 I am really wanting to do this on. I have been following this and another post....
#1833
Shelby GT350 Member
Join Date: September 11, 2006
Location: Cumming, GA
Posts: 2,349
Likes: 0
Received 4 Likes
on
3 Posts
Figure $700 to $1100 depending on how much you pay for cluster and whether you want to flash your PCM or use black box. And you also have shifter to contend with on automatic.
#1834
Legacy TMS Member
So where has everyone been getting the clusters lately? Been doing a search and have not found any online yet. Does anyone have an estimated cost on this whole process? I have an auto kona blue 2012 I am really wanting to do this on. I have been following this and another post....
#1835
GT Member
Thanks for the responses..... I already have the vcm2 and I would prefer to use the black box. I have my car tuned and don't want to mess with that. I don't mind running wires if it is needed but would rather do this the easiest way...lol. So the black box will give me the select shift also?
Still having a hard time finding the clusters. Can we get them new from ford? I think I read somewhere that they won't sell them?
Still having a hard time finding the clusters. Can we get them new from ford? I think I read somewhere that they won't sell them?
#1836
Thanks for the responses..... I already have the vcm2 and I would prefer to use the black box. I have my car tuned and don't want to mess with that. I don't mind running wires if it is needed but would rather do this the easiest way...lol. So the black box will give me the select shift also?
Still having a hard time finding the clusters. Can we get them new from ford? I think I read somewhere that they won't sell them?
Still having a hard time finding the clusters. Can we get them new from ford? I think I read somewhere that they won't sell them?
#1838
Legacy TMS Member
Thanks for the responses..... I already have the vcm2 and I would prefer to use the black box. I have my car tuned and don't want to mess with that. I don't mind running wires if it is needed but would rather do this the easiest way...lol. So the black box will give me the select shift also?
Still having a hard time finding the clusters. Can we get them new from ford? I think I read somewhere that they won't sell them?
Still having a hard time finding the clusters. Can we get them new from ford? I think I read somewhere that they won't sell them?
#1840
Shelby GT350 Member
Join Date: September 11, 2006
Location: Cumming, GA
Posts: 2,349
Likes: 0
Received 4 Likes
on
3 Posts
You bought your vcm from same seller as rest of us ??? That sucks. I think they have a warranty. Contact seller. I have many hours of use out of mine and still working fine.