Retrofitting the 4.2 LCD Track Apps cluster
#81
Shelby GT350 Member
Join Date: September 11, 2006
Location: Cumming, GA
Posts: 2,349
Likes: 0
Received 4 Likes
on
3 Posts
Track Apps will appear in your cluster .. but it will not work without the new ABS module. Pretty sure that was thoroughly discussed in this thread. It was also mentioned early in this thread that the 2012 select buttons can control the menu.
#82
Just so I'm 100%, I have a base 14 and putting in a Premium cluster does not require module programming? No as build has to be done also?
Last edited by Onefastmf; 11/9/14 at 10:38 AM. Reason: added ?
#83
I cannot gets pats to work, I did the earase of the keys and then when I get to the programming keys, it says tune key off, turn new key to on for 6 and then do same for next key, when I do that it says two keys have been programmed but also says to many keys cycles and security access lost and says to go though process again. Not sure what I'm doing wrong, please help.
#84
Mach 1 Member
I cannot gets pats to work, I did the earase of the keys and then when I get to the programming keys, it says tune key off, turn new key to on for 6 and then do same for next key, when I do that it says two keys have been programmed but also says to many keys cycles and security access lost and says to go though process again. Not sure what I'm doing wrong, please help.
LEXiiON
#89
Mach 1 Member
EDIT: If anybody needs ASBUILT PM me the VIN you need the ASBUILT for. I will only get it for established members of this site.
-Matt
-Matt
Last edited by zeroaviation; 2/15/15 at 07:13 AM.
#92
#93
Mach 1 Member
Does anyone have a part number for the pins used in the connectors for the clockspring or the switch?
I know blueeyedsnake (sal) found them, but hes banned from most forums now. So I cant ask him :/
-Matt
I know blueeyedsnake (sal) found them, but hes banned from most forums now. So I cant ask him :/
-Matt
#94
Mach 1 Member
I have his cell # if you need it.
I just been to the as built site and got a as built version of a car. So it still works for me without login.
LEXiiON
I just been to the as built site and got a as built version of a car. So it still works for me without login.
LEXiiON
Last edited by LEXiiON; 3/2/15 at 10:23 AM.
#96
Mach 1 Member
Another update: You have to go manually into the link. Start the at motorcraftservice.com, then Quick Guides, then as built. Works fine.
LEXiiON
LEXiiON
Last edited by LEXiiON; 3/2/15 at 10:33 AM.
#98
Mach 1 Member
I texted him, I doubt I get a reply sadly :/ If anybody has this info, would be greatly appreciated.
This is good news!
-Matt
-Matt
#99
Legacy TMS Member
Thread Starter
You need males and females, I assume? I can certainly get you some from my old harnesses as Dan said - but as for ordering them, that would take some research.
#100
Mach 1 Member
I was hoping to get them so I can order them... Will report back what I find once I get my car out of storage this weekend.
-Matt