Steeda is Officially Taking Orders on the Cam Idle Tunes
There is no 2013 calibration support at this time. When our 2013 Mustang GT gets delivered we will start looking at the unit and how it differs from the 2012 GT. We will keep you updated to our findings.
Best Regards,
TJ
Best Regards,
TJ
So is it a problem if the car has a J-brand CAI on it? Its a silly question I know, but with all the drama regarding the CAI catfight, I did see some steeda notes about tuning out some low-end torque loss on the JLT unit.
I know a steeda unit would honestly be preferred, but for me I'm pretty settled with my setup other than wanting the tune.
I know a steeda unit would honestly be preferred, but for me I'm pretty settled with my setup other than wanting the tune.
Mycoolm3,
As long as the other tunes are an SCT recognized provider, like Bama is, you will not have any issue holding tunes from another manufacturer.
If you are asking if you can add the Steeda Cam Tune to an existing Bama Tune, then the question is No. The Cam Idle Tune is a complete seperate tune.
Best Regards,
TJ
As long as the other tunes are an SCT recognized provider, like Bama is, you will not have any issue holding tunes from another manufacturer.
If you are asking if you can add the Steeda Cam Tune to an existing Bama Tune, then the question is No. The Cam Idle Tune is a complete seperate tune.
Best Regards,
TJ
Last edited by tj@steeda; Apr 3, 2012 at 07:08 AM.
There is no problem if your car has J brand intake. We wanted to show the differences in manufacturing, engineering, etc that make the Steeda intake a more valuable purchases.
As long as you are happy with your current set up then that is all that matters. In the future if you are looking to add another CAI and want to see the differnence the Steeda unit makes, then PM and we will get you taken care of.
Best Regards,
TJ
As long as you are happy with your current set up then that is all that matters. In the future if you are looking to add another CAI and want to see the differnence the Steeda unit makes, then PM and we will get you taken care of.
Best Regards,
TJ
Last edited by tj@steeda; Apr 3, 2012 at 07:10 AM.
Gus can tune for Brand J with no problem and have tuned regular and boss intake combos but with stock cam timing. We have not tested the cam idle tune with brand J and with that intake I would imagine I am going to have some transitional issues on the low end that will take some work to fix. Might even have issues under deceleration that could lead to stalling.
Gus can work with you, but just know that there may be some additional timing that is needed in order to get it to cooperate.
Best Regards,
TJ
Gus can work with you, but just know that there may be some additional timing that is needed in order to get it to cooperate.
Best Regards,
TJ
Originally Posted by Blackbird.
Well it was great the power increase is really nice. The cam idle sounds awesome too. I think it will sound even better when I add the BOSS quad exhaust.
Originally Posted by tj@steeda
FMPG.... Fun Miles Per Gallon
Glad you are enjoying, will be even more fun with the Boss Quad Exhaust!!
Thanks for the support and feedback.
Best Regards,
TJ
Glad you are enjoying, will be even more fun with the Boss Quad Exhaust!!
Thanks for the support and feedback.
Best Regards,
TJ
It's not much but here's a quick video shortly after I installed it and took it for a test drive that day.
Last edited by Blackbird.; Apr 16, 2012 at 08:18 PM.
I have a question. Today I drove her to work. But the issue is every time i start the car its fine. Then I put the clutch in and put it in reverse, I don't give any gas input nor do I let out the clutch and it just dies. This also happened shortly after I started it and put it in 1st. Any ideas?
I have a question. Today I drove her to work. But the issue is every time i start the car its fine. Then I put the clutch in and put it in reverse, I don't give any gas input nor do I let out the clutch and it just dies. This also happened shortly after I started it and put it in 1st. Any ideas?




But thank you.