View Poll Results: Do you prefer us lobbing Potatoes or Grenades to take care of spammers?
Lob potatoes to just stun them
2
18.18%
Lob grenades and remove them from the TMS pool permanently
9
81.82%
Voters: 11. You may not vote on this poll
Mustangs Coast to Coast
Legacy TMS Member
I had to replace the tires on my 92 in 99 or 2000, due to two or three of them would not hold air. They looked like new and had a ton of tread left but when we took them off, the insides were in bad shape. These were the stock tires, if I recall correctly they were Firestones.
Post *****
Thread Starter
Hooley Systemax from Jeg's
300-501-1 - Holley SysteMAX Engine Systems Details
SysteMAX Ford
SYSTEMAX™
Comments/Recommendations
A maximum performance, but very streetable package for the Ford 5.0L H.O. EFI V8. This one will really let your Mustang kick up its heels! Additional parts recommendations: Holley 70mm Ford throttle body, P/N 112-500; 24 or 30 lb./hr. Holley fuel injectors; Holley 70mm EGR spacer, P/N 112-550; 70mm mass air flow meter; Holley 190 liters per hour in-tank electric fuel pump, P/N 12-901; Holley adjustable fuel pressure regulator, P/N 512-500-1; Lunati 1.6:1 roller rockers, P/N 84160. Add a set of 1-5/8'' tube headers (Hooker P/N 6128 or FlowTech P/N 12110), ''cat-back'' system (Hooker P/N 16862 or FlowTech P/N 42604) and Hooker Aero Chamber mufflers, P/N 21502. Note: FlowTech's cat-back system contains mufflers but requires an H-pipe, P/N 53605.
Vital Statistics
1986-93 Ford Mustang, 5.0L H.O. EFI engine
Horsepower: 350HP @ 5750 RPM
Torque: 350 lbs./ft. @ 4000 RPM
Kit Contents
Lunati roller camshaft, P/N 51027LUN
Holley upper and lower shiny intake manifold, P/N 300-72S (Upper intake manifold only) P/N 300-74S (Lower intake manifold only) P/N 300-75S
Holley double roller timing chain and gears
Fully assembled Holley 17º valve aluminum cylinder heads, P/N 300-575
Hardened push rods, P/N 301-32
ARP® cylinder head bolts, P/N 301-31
SysteMAX Ford
SYSTEMAX™
Comments/Recommendations
A maximum performance, but very streetable package for the Ford 5.0L H.O. EFI V8. This one will really let your Mustang kick up its heels! Additional parts recommendations: Holley 70mm Ford throttle body, P/N 112-500; 24 or 30 lb./hr. Holley fuel injectors; Holley 70mm EGR spacer, P/N 112-550; 70mm mass air flow meter; Holley 190 liters per hour in-tank electric fuel pump, P/N 12-901; Holley adjustable fuel pressure regulator, P/N 512-500-1; Lunati 1.6:1 roller rockers, P/N 84160. Add a set of 1-5/8'' tube headers (Hooker P/N 6128 or FlowTech P/N 12110), ''cat-back'' system (Hooker P/N 16862 or FlowTech P/N 42604) and Hooker Aero Chamber mufflers, P/N 21502. Note: FlowTech's cat-back system contains mufflers but requires an H-pipe, P/N 53605.
Vital Statistics
1986-93 Ford Mustang, 5.0L H.O. EFI engine
Horsepower: 350HP @ 5750 RPM
Torque: 350 lbs./ft. @ 4000 RPM
Kit Contents
Lunati roller camshaft, P/N 51027LUN
Holley upper and lower shiny intake manifold, P/N 300-72S (Upper intake manifold only) P/N 300-74S (Lower intake manifold only) P/N 300-75S
Holley double roller timing chain and gears
Fully assembled Holley 17º valve aluminum cylinder heads, P/N 300-575
Hardened push rods, P/N 301-32
ARP® cylinder head bolts, P/N 301-31
Swamp Donkey Man Cans
Join Date: August 20, 2007
Location: Massachusetts
Posts: 4,340
Likes: 0
Received 2 Likes
on
2 Posts
Nope thats your head silly.....
Ok seriously, go to a GM dealer and ask them if they have P# 1052627. It is called GM Vehicle Care Rust Penetrate & Inhibitor. This stuff is amazing and I used to buy it by the case when I worked at the dealer. As a matter of fact I need more.
Not sure if they still make it of not, I don't see it listed on the web site, if they don't go to the oldest GM dealer in your area see if they have any out back. If not I would go with PB Blaster.
Not sure if they still make it of not, I don't see it listed on the web site, if they don't go to the oldest GM dealer in your area see if they have any out back. If not I would go with PB Blaster.
I will buy Jack Stands!!!
Partses arrived today.
UPS guys comes in and hands me a small package. I look at it and its for another address. I say this isn't mine and he gets this look on his face. He goes down the street and comes back. He delivered my packages to someone else and they signed for them.
This was not my usual driver.
So I am still waiting on the Cobra 10th wheels, the front brake parts and the headers and mid-pipe.
UPS guys comes in and hands me a small package. I look at it and its for another address. I say this isn't mine and he gets this look on his face. He goes down the street and comes back. He delivered my packages to someone else and they signed for them.
This was not my usual driver.
So I am still waiting on the Cobra 10th wheels, the front brake parts and the headers and mid-pipe.
Sidenote: I can't get over how smooth my trucks body is after that wax. It's so shiny too!
NTTAWWT
NTTAWWT
$15-20. They're a little high, or so it seems...but you can use them forever, and they work wonders. Just like a good wax. I paid around $20 for my first bottle of NXT 2.0 wax...I've probably put 5-7 coats on, and the bottle is just under half full. That's on two big SUV's. I picked up a bottle at Advance this weekend for $11
Swamp Donkey Man Cans
Join Date: August 20, 2007
Location: Massachusetts
Posts: 4,340
Likes: 0
Received 2 Likes
on
2 Posts
Post *****
Thread Starter
Like Father...
I ♥ Sausage
I ♥ Sausage
I will buy Jack Stands!!!
I was more confused like "I need lube for a claybar?!" That makes no sense.
My bar most definately is not made of clay, so I don't have to think like you old dudes
My bar most definately is not made of clay, so I don't have to think like you old dudes
Cobra R Member
I feel like crap. I went to the doctor today, and found out I had the dreaded swine flu over the week end. Let me tell you, it ain't no walk in the park. The only things I have left to cough up are my lungs
Join Date: December 5, 2006
Location: Trapped in Minnesota
Posts: 31,619
Likes: 0
Received 70 Likes
on
66 Posts
That sucks. Someone at work had it last week, and I tried to stay as far away as possible when they came back.
I will buy Jack Stands!!!
That sucks man. Is it worse than normal flu? Sorry if this is a stupid question