'13-14 Cluster into '10-12 car (with TrackApps) retrofit
Bullitt Member
Joined: November 14, 2008
Posts: 322
Likes: 0
From: Loooziana
Mach 1 Member
Joined: May 29, 2012
Posts: 791
Likes: 23
From: Westminster, CO
Mach 1 Member
Joined: May 29, 2012
Posts: 791
Likes: 23
From: Westminster, CO
Ok... one new fact... on the 2010's
I got a new ABS module today... and TrackApps in my Garage...
Here is the thing:
This time i connected the EPAS and did all the steps required to install the ABS. Before doing anything i read all DTC's:
Vin mismatch
Not initialized
Incompatible Software
Interestingly before i did anything, TrackApps was fully functional.
Did the IVS, PMI etc, everything successful (including a note that my PCM VIN is incorrect) but that Software Mismatch stays (well, kinda expected, after all the conversations with Matt)...
But TrackApps works.
Me, like, let's go for a test drive... put everything together and guess what:
No more TrackApps... well i had to disconnect the EPAS.... as it was lying around outside of the car, just wired up...
So no EPAS = no TrackApps
LEXiiON
I got a new ABS module today... and TrackApps in my Garage...
Here is the thing:
This time i connected the EPAS and did all the steps required to install the ABS. Before doing anything i read all DTC's:
Vin mismatch
Not initialized
Incompatible Software
Interestingly before i did anything, TrackApps was fully functional.
Did the IVS, PMI etc, everything successful (including a note that my PCM VIN is incorrect) but that Software Mismatch stays (well, kinda expected, after all the conversations with Matt)...
But TrackApps works.
Me, like, let's go for a test drive... put everything together and guess what:
No more TrackApps... well i had to disconnect the EPAS.... as it was lying around outside of the car, just wired up...
So no EPAS = no TrackApps
LEXiiON
Legacy TMS Member
Joined: November 7, 2006
Posts: 2,792
Likes: 57
From: Alberta
Can we get a stickied post on page one that shows total cost and parts to buy to get this to work for quick reference? 100 pages is a ton to read through lol
Bullitt Member
Joined: March 11, 2013
Posts: 326
Likes: 22
From: Houston, Tx.
however i too lost my compass.
i dont NEED it, but.... anyone know how to get it back?
Bullitt Member
Joined: March 11, 2013
Posts: 326
Likes: 22
From: Houston, Tx.
so my car is a base, i just put the premium cluster in from a premium car last week, its amazing and i love it.
I noticed my cluster mph doesnt match what my gps says, im off by 2 miles per hour. The cluster will say for example 70mph but the gps says im doing 68.
Old cluster was spot on with the gps. Would it matter that the cluster came from a car running the track pack 19s?
using IDS and the VCM it says axle/tire size stuff is all what its always been 3.31 and 235/50/18 like it should.
I noticed my cluster mph doesnt match what my gps says, im off by 2 miles per hour. The cluster will say for example 70mph but the gps says im doing 68.
Old cluster was spot on with the gps. Would it matter that the cluster came from a car running the track pack 19s?
using IDS and the VCM it says axle/tire size stuff is all what its always been 3.31 and 235/50/18 like it should.
Bullitt Member
Joined: March 11, 2013
Posts: 326
Likes: 22
From: Houston, Tx.
so my car is a base, i just put the premium cluster in from a premium car last week, its amazing and i love it.
I noticed my cluster mph doesnt match what my gps says, im off by 2 miles per hour. The cluster will say for example 70mph but the gps says im doing 68.
Old cluster was spot on with the gps. Would it matter that the cluster came from a car running the track pack 19s?
using IDS and the VCM it says axle/tire size stuff is all what its always been 3.31 and 235/50/18 like it should.
I noticed my cluster mph doesnt match what my gps says, im off by 2 miles per hour. The cluster will say for example 70mph but the gps says im doing 68.
Old cluster was spot on with the gps. Would it matter that the cluster came from a car running the track pack 19s?
using IDS and the VCM it says axle/tire size stuff is all what its always been 3.31 and 235/50/18 like it should.
Okay, so maybe some folks might need to do this if they are having the same issue.
Cluster came from premium with 19s and went into a base with 18s.
even tho when i open IDS and go into axle ratio/tire size it still said it was set for 18s - it wasnt.
So i programmed it for 19s then reprogrammed it for 18s. now my speedometer is 100% accurate when verifying with my gps.
YAY!
GT Member
Joined: May 31, 2012
Posts: 182
Likes: 1
From: Indianapolis
Found this site today while I was looking for Navi stuff. Unfortunately the Navi stuff is discontinued, but they have clusters.
$473 with a $300 core.... I'm not sure if it's track apps or not
$473 with a $300 core.... I'm not sure if it's track apps or not
GT Member
Joined: May 31, 2012
Posts: 182
Likes: 1
From: Indianapolis
I guess it helps if I put the link in...lol
http://parts.autonationfordwhitebearlake.com/ford/mustang/er3z10849ea/2014-year/gt-trim/5-0l-v8-gas-engine/electrical-cat/instruments-and-gauges-scat/?part_name=instrument-cluster
GT Member
Joined: May 31, 2012
Posts: 182
Likes: 1
From: Indianapolis
http://parts.autonationfordwhitebearlake.com/ford/mustang/dr3z10849ca/2013-year/boss-302-trim/5-0l-v8-gas-engine/electrical-cat/instruments-and-gauges-scat/?part_name=instrument-cluster
13 boss gauge
450
13 boss gauge
450
Bullitt Member
Joined: March 11, 2013
Posts: 326
Likes: 22
From: Houston, Tx.
its trackapps if its got an LCD screen on it, they will ask for a vin number and mileage when you order. if they dont, then they will call asking for that info. I just went thru this process myself. gave them a vin from a car with the LCD screen.
Mach 1 Member
Joined: August 22, 2014
Posts: 545
Likes: 47
From: Vermont
Hey guys, Im back and I have decided to finally tie this loose end after finishing my 13 rear end w/GT500 Axle-backs and I have just put in the new abs module and PMI it with my VCM II but my ABS Light is still flashing and advance track is still not working maybe I missed something but I also tried as-built for the ABS (Worked I used code 117A which is for a v6 premium 2013) I tried as-built for BCM-B but it would fail to reprogram and then I tried SJB which failed to program as well. any help would be appreciated I'm also going to try to get in contact with Zeroaviation again, and yes I am on a 2012 V6 so far I have all my gauges working as-well as track apps (Ran a 3.2 sec 0-30 for a test on track apps) I just have the pesky warning lights on my dash but other than that everything is working great.
Mach 1 Member
Joined: May 29, 2012
Posts: 791
Likes: 23
From: Westminster, CO
Hey guys, Im back and I have decided to finally tie this loose end after finishing my 13 rear end w/GT500 Axle-backs and I have just put in the new abs module and PMI it with my VCM II but my ABS Light is still flashing and advance track is still not working maybe I missed something but I also tried as-built for the ABS (Worked I used code 117A which is for a v6 premium 2013) I tried as-built for BCM-B but it would fail to reprogram and then I tried SJB which failed to program as well. any help would be appreciated I'm also going to try to get in contact with Zeroaviation again, and yes I am on a 2012 V6 so far I have all my gauges working as-well as track apps (Ran a 3.2 sec 0-30 for a test on track apps) I just have the pesky warning lights on my dash but other than that everything is working great.
LEXiiON
