Notices
2010-2014 Mustang Information on The S197 {GenII}
Sponsored By:
Sponsored By:

2011 5.0 "cammed " idle...w/video

Thread Tools
 
Search this Thread
 
Old 3/16/11, 02:22 PM
  #61  
Cobra Member
 
ShaneGT's Avatar
 
Join Date: January 30, 2011
Location: Houma, Louisiana
Posts: 1,161
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by cdynaco
So.... massaging the overlap for a cool idle is one thing... but did it increase top end HP performace like overlap should?
i doubt it, because after 1400rpms, it shifts back to the normal tune..
Old 3/16/11, 02:47 PM
  #62  
Bullitt Member
 
KonaBlue5.0's Avatar
 
Join Date: July 7, 2010
Posts: 416
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by cdynaco
So.... massaging the overlap for a cool idle is one thing... but did it increase top end HP performace like overlap should?
So far as I've heard, it's just for idle at the moment. Logical would indicate, however, that if the overlap can be adjusted at idle...one should be able to adjust it throughout the entire revband. Baby steps, perhaps? Not sure.
Old 3/16/11, 03:17 PM
  #63  
Post *****
 
cdynaco's Avatar
 
Join Date: December 14, 2007
Location: State of Jefferson Mountains USA
Posts: 20,005
Likes: 0
Received 4 Likes on 4 Posts
Originally Posted by KonaBlue5.0
So far as I've heard, it's just for idle at the moment. Logical would indicate, however, that if the overlap can be adjusted at idle...one should be able to adjust it throughout the entire revband. Baby steps, perhaps? Not sure.
Well we know Ford has already programmed some of that into the ECU, restricting overlap at idle so as to meet emission standards, then increasing overlap for performance at higher rpm's.

So it will be interesting to see how the tuners play with that top end overlap in addition to their typical ignition timing advance and A/F settings. And how far they can improve performance with overlap until they hit the limits of the existing cam profiles.

Last edited by cdynaco; 3/16/11 at 03:18 PM.
Old 3/16/11, 03:37 PM
  #64  
Team Mustang Source
Thread Starter
 
montreal ponies's Avatar
 
Join Date: January 30, 2004
Location: Montreal
Posts: 3,738
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by jay45dee
Seems like just a gimmick to me.
This is no gimmick, it's real sound, from a real motor you're hearing. Big difference.
Old 3/16/11, 03:44 PM
  #65  
Bullitt Member
 
rodmoe's Avatar
 
Join Date: September 26, 2010
Location: Wausau Wi
Posts: 250
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by jay45dee
Seems like just a gimmick to me. I'd prefer real cams instead of just pretending. The term 'ricer' comes to mind.
LOL if my RSX had sounded like this i might have kept it .. ummm maybe not it still had zip for power below 3k and my car now i can let the clutch out and it moves.. Not having to rev it to move is so sweet.. Now if it sounds like this so much the better. Cuz if you can back it up it it's not BS is it ?? and this 5.0 moves !! the more i drive it the more i am liking it
Old 3/16/11, 05:43 PM
  #66  
V6 Member
 
jay45dee's Avatar
 
Join Date: May 1, 2010
Location: KC, MO
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts
I come from a racing background and if it has no purpose or function, other then just to show off, then to me it's just a gimmick. Put real cams in, which will create this sound, then it will be cool. But to pretend?....come on. (not trying to insult the guys that like it. I just think it's pointless)

Last edited by jay45dee; 3/16/11 at 05:45 PM.
Old 3/16/11, 05:53 PM
  #67  
MOTM Committee Member
 
stangfoeva's Avatar
 
Join Date: April 17, 2006
Location: SoCal
Posts: 9,181
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by David Young
Back on Topic.....


I love how this sounds. I would 'maybe' like to have one for my V-6 if one was ever made.
David they have one for the V6
Old 3/16/11, 06:08 PM
  #68  
Team Mustang Source
Thread Starter
 
montreal ponies's Avatar
 
Join Date: January 30, 2004
Location: Montreal
Posts: 3,738
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by jay45dee
I come from a racing background and if it has no purpose or function, other then just to show off, then to me it's just a gimmick. Put real cams in, which will create this sound, then it will be cool. But to pretend?....come on. (not trying to insult the guys that like it. I just think it's pointless)
You obviously don't have a Boss302 with track key on order ! Just sayin'.
But i hear ya'....to each their own, but as soon as this gimmick comes out ...I want one. To me it's a nice symphony of what Ti-VCT and ECU can do together.
I come from the old school as well, i know what you mean. Check out this link, this was my last baby not too long ago, and yes it has a big cam in it, no gimmick i swear !

http://www.youtube.com/watch?v=7OPbnoxmAt4
Old 3/16/11, 07:28 PM
  #69  
legacy Tms Member MEMORIAL Rest In Peace 10/06/2021
 
David Young's Avatar
 
Join Date: September 16, 2009
Location: Clinton Tennessee
Posts: 3,377
Received 125 Likes on 101 Posts
Originally Posted by stangfoeva
David they have one for the V6
I missed the one posted in this Thread for the V-6 somehow Here is another one for the V-6, but it doesn't sound as good as the one posted first http://www.youtube.com/watch?v=17Jbz7_yTlo
Old 3/16/11, 09:06 PM
  #70  
V6 Member
 
jay45dee's Avatar
 
Join Date: May 1, 2010
Location: KC, MO
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by montreal ponies
Check out this link, this was my last baby not too long ago, and yes it has a big cam in it, no gimmick i swear !

http://www.youtube.com/watch?v=7OPbnoxmAt4
Very very nice car.
Old 3/16/11, 10:52 PM
  #71  
Bullitt Member
 
FastRedPonyCar's Avatar
 
Join Date: January 19, 2011
Location: Montgomery, AL
Posts: 257
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by montreal ponies
You obviously don't have a Boss302 with track key on order ! Just sayin'.
But i hear ya'....to each their own, but as soon as this gimmick comes out ...I want one. To me it's a nice symphony of what Ti-VCT and ECU can do together.
I come from the old school as well, i know what you mean. Check out this link, this was my last baby not too long ago, and yes it has a big cam in it, no gimmick i swear !

http://www.youtube.com/watch?v=7OPbnoxmAt4
One of the most beautiful things I've heard/seen! My wife and I laid about 2 blocks of rubber behind us in a 69 Mach1 leaving the church after our wedding. Hell with an old limo! I'm going to go out in STYLE!



Anyways, as far as the original post goes, I think it's neat that they can do this with only the tune but does this tune produce more power than a normal tune or is it only a modification for how the cams behave when the car is idling?

If it's just to change the way it sounds at idle, I kinda side with Jay45dee on this one. It's neat but sort of misleading in a certain way.

As long as the rest of the tune gives you power with that lope then I think it's fine though.
Old 3/17/11, 06:55 AM
  #72  
I am Shauny Clause
MOTM July 2010 Winner
 
Stinger1982's Avatar
 
Join Date: November 25, 2009
Location: Metro Detroit
Posts: 1,519
Likes: 0
Received 0 Likes on 0 Posts
My car unexpectadly came out of storage because of this thread...stay tuned
Old 3/17/11, 09:36 AM
  #73  
Bullitt Member
 
LLZuB's Avatar
 
Join Date: September 21, 2009
Location: Ontario, Canada
Posts: 346
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Stinger1982
My car unexpectadly came out of storage because of this thread...stay tuned
was that pun intended
Old 3/17/11, 09:39 AM
  #74  
I am Shauny Clause
MOTM July 2010 Winner
 
Stinger1982's Avatar
 
Join Date: November 25, 2009
Location: Metro Detroit
Posts: 1,519
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by LLZuB
was that pun intended
no! when i read your post I nearly spit gatorade on the keyboard
Old 3/17/11, 12:34 PM
  #75  
Cobra Member
 
ShaneGT's Avatar
 
Join Date: January 30, 2011
Location: Houma, Louisiana
Posts: 1,161
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by Stinger1982
no! when i read your post I nearly spit gatorade on the keyboard

you should invest in a keyboard condom..


Old 3/17/11, 12:51 PM
  #76  
Team Mustang Source
Thread Starter
 
montreal ponies's Avatar
 
Join Date: January 30, 2004
Location: Montreal
Posts: 3,738
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Stinger1982
My car unexpectadly came out of storage because of this thread...stay tuned
Keep us posted. Inquiring minds want to know !
Old 3/18/11, 03:44 PM
  #77  
Team Mustang Source
Thread Starter
 
montreal ponies's Avatar
 
Join Date: January 30, 2004
Location: Montreal
Posts: 3,738
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Stinger1982
My car unexpectadly came out of storage because of this thread...stay tuned

So , how does it sound !
Old 3/18/11, 07:31 PM
  #78  
GT Member
 
r1rider98's Avatar
 
Join Date: December 18, 2010
Location: Bakersfield, CA
Posts: 115
Likes: 0
Received 0 Likes on 0 Posts
I think it sounds awesome. The exhaust has been changed also. It probably has longtube headers aswell.
Old 3/18/11, 09:46 PM
  #79  
Member
 
retiredf5's Avatar
 
Join Date: March 11, 2011
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by FCMalie
Same here.
Mind telling what your RPM's are at 60 mph in 6th gear?
Old 3/18/11, 09:52 PM
  #80  
 
JimmyM's Avatar
 
Join Date: October 22, 2010
Posts: 805
Likes: 0
Received 0 Likes on 0 Posts
If BAMA eventually does this (for the 5.0 and/or V6), it would be great considering we have free tunes for life.


Quick Reply: 2011 5.0 "cammed " idle...w/video



All times are GMT -6. The time now is 06:57 AM.