2011 5.0 "cammed " idle...w/video
#21
Team Mustang Source
Thread Starter
Join Date: January 30, 2004
Location: Montreal
Posts: 3,738
Likes: 0
Received 0 Likes
on
0 Posts
#25
Like Father...
I ♥ Sausage
I ♥ Sausage
Here's another variation from a tuner I've never heard of, with no cats and Corsa Extremes...
Sounds a lot like the 3v Hot Rod cams to me. Pretty impressive to be able to do that with a tune.
Sounds a lot like the 3v Hot Rod cams to me. Pretty impressive to be able to do that with a tune.
#26
Post *****
Join Date: December 14, 2007
Location: State of Jefferson Mountains USA
Posts: 20,005
Likes: 0
Received 4 Likes
on
4 Posts
Here's what I still don't understand - the pulses don't keep time - whether its real cams or imitation cams from a tune.
I asked this before about the 3V's and the response had to do with 2 intake/1 exhaust valve. But the 5.0 has 2 & 2 and they still don't keep time.
Back in the day the lopers were a steady ba-dum ba-dum ba-dum ba-dum... endlessly.
And listening to NHRA all weekend it was the same - whether it was top fuel cacklin' or Pro-stock. They all kept a steady lope.
Whereas these cycle in and out of time. The pulses run together and then back in time again, then run together, then in time again.
What's up?
I asked this before about the 3V's and the response had to do with 2 intake/1 exhaust valve. But the 5.0 has 2 & 2 and they still don't keep time.
Back in the day the lopers were a steady ba-dum ba-dum ba-dum ba-dum... endlessly.
And listening to NHRA all weekend it was the same - whether it was top fuel cacklin' or Pro-stock. They all kept a steady lope.
Whereas these cycle in and out of time. The pulses run together and then back in time again, then run together, then in time again.
What's up?
Last edited by cdynaco; 3/14/11 at 04:40 PM.
#28
Mach 1 Member
man I really want to get a tune like this. I have a couple files now that have decent drivability, but it would be fun to flash one of these, especially if the tuners have figured out how to make it drivable.
#29
Bullitt Member
Join Date: May 16, 2006
Location: Las Vegas
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
I like that a lot! It does need a bit more polishing and I would like to hear it rev and return to idle.
On a side note, I think I'm the one in the dark ages here. I had no idea you could do that with just a tune. I know this isn't the Boss track key but when I read about that I didn't figure it wouldn't really sound any different because it was just modifying the tune. I'm guessing that is something new only for the 5.0 right? I never saw anything like that for the 4.6.
On a side note, I think I'm the one in the dark ages here. I had no idea you could do that with just a tune. I know this isn't the Boss track key but when I read about that I didn't figure it wouldn't really sound any different because it was just modifying the tune. I'm guessing that is something new only for the 5.0 right? I never saw anything like that for the 4.6.
#30
Post *****
Join Date: December 14, 2007
Location: State of Jefferson Mountains USA
Posts: 20,005
Likes: 0
Received 4 Likes
on
4 Posts
Whereas with the TiVCT DOHC you can separate the intake valve timing from the exhaust to create your overlap.
Last edited by cdynaco; 3/14/11 at 05:57 PM.
#31
Bullitt Member
Join Date: May 16, 2006
Location: Las Vegas
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
#34
Like Father...
I ♥ Sausage
I ♥ Sausage
#36
Team Mustang Source
Thread Starter
Join Date: January 30, 2004
Location: Montreal
Posts: 3,738
Likes: 0
Received 0 Likes
on
0 Posts
#38
I have heard pleeeeeennnnnntttttttyyyy of barely 300HP pushrod 5.0s that sound just like that. I wouldn't call that car or this car in this thread a beast!
It's called technology sir embrace it! because you bet your *** that if you could have got a pushrod 5.0 to make that sound with a tune everybody would have too.