Midwest TMS'ers General Communication Thread
#9223
BoogieNights Studios:
Official Fluffer
Official Fluffer
Join Date: September 13, 2009
Location: Clarksville, TN
Posts: 5,520
Likes: 0
Received 5 Likes
on
5 Posts
I dont know I may be stuck up but I only use Maguires products. I have used them since I got into cars and have never turned away from them. I use Mothers Aluminum/Mag polish for my Aluminum products.
#9225
If you got 4 hours to waste and a 10lb. bag of popcorn read this. Its about John Hennessey and his vette and viper business.
http://tinyurl.com/khoow
http://tinyurl.com/khoow
#9228
If you got 4 hours to waste and a 10lb. bag of popcorn read this. Its about John Hennessey and his vette and viper business.
http://tinyurl.com/khoow
http://tinyurl.com/khoow
#9229
Legacy TMS Member
Join Date: January 9, 2005
Location: New Carlisle, Ohio (20 miles north of Dayton)
Posts: 6,982
Likes: 0
Received 6 Likes
on
6 Posts
Darrell I received the valve covers today safe and sound. Great packing job. You will be seeing that box again. Nick...great shipping job. I am going to take them to work tommorow and put them in our chemical cleaning tank over the weekend. It is just a strong detergent but it is at about 200 degrees. I want to see if it will peel that black paint from them. After getting a good look at the inside of them I would never sandblast or glass bead them. The baffle inside is very large...it is riveted in and could hide all kind of grit. If that doesn't work I will try a chemical stripper. As I have said I have decided to paint them Ford Blue. I haven't went looking for a good heat resistant paint yet so if you guys have a suggestion I am all ears. Hey Nick...PM me what Darrell's shipping cost was since he doesn't seem to want to share that info!!! Also send me your address I ship them back to you. :-)
Last edited by 70MACH1OWNER; 12/4/09 at 03:51 PM.
#9230
You going to paint or powercoat yours??
I think the cost was 1 dead frog, 2 pop bottle caps and a used q-tip.
I would think if you kept the top side up, you could Bead Blast them or tape off the bottom side and all the holes. But do what you think is safe. There is a base coat of Black, sevral coats of the shiny paint and a couple coats of clear.
Darrell I received the valve covers today safe and sound. Great packing job. You will be seeing that box again. Nick...great shipping job. I am going to take them to work tommorow and put them in our chemical cleaning tank over the weekend. It is just a strong detergent but it is at about 200 degrees. I want to see if it will peel that black paint from them. After getting a good look at the inside of them I would never sandblast or glass bead them. The baffle inside is very large...it is riveted in and could hide all kind of grit. If that doesn't work I will try a chemical stripper. As I have said I have decided to paint them Ford Blue. I haven't went looking for a good heat resistant paint yet so if you guys have a suggestion I am all ears. Hey Nick...PM me what Darrell's shipping cost was since he doesn't seem to want to share that info!!! Also send me your address I ship them back to you. :-)
I would think if you kept the top side up, you could Bead Blast them or tape off the bottom side and all the holes. But do what you think is safe. There is a base coat of Black, sevral coats of the shiny paint and a couple coats of clear.
#9232
#9233
Legacy TMS Member
Join Date: January 9, 2005
Location: New Carlisle, Ohio (20 miles north of Dayton)
Posts: 6,982
Likes: 0
Received 6 Likes
on
6 Posts
You going to paint or powercoat yours??
I think the cost was 1 dead frog, 2 pop bottle caps and a used q-tip.
I would think if you kept the top side up, you could Bead Blast them or tape off the bottom side and all the holes. But do what you think is safe. There is a base coat of Black, sevral coats of the shiny paint and a couple coats of clear.
I think the cost was 1 dead frog, 2 pop bottle caps and a used q-tip.
I would think if you kept the top side up, you could Bead Blast them or tape off the bottom side and all the holes. But do what you think is safe. There is a base coat of Black, sevral coats of the shiny paint and a couple coats of clear.
Good God man it will cost me a fortune to get that disco ball paint off them valve covers!!!! On a different subject. Darrell bought himself some wax for an early Xmas present and I am also looking for one but the search function in the mod section really sucks. Who has the cheapest price on a TCI autoshifter these days? I searched Brenspeeds site and can't even get a hit. The last time I saw it there it said "call for current price". I am thinking I saw it for around $330 bucks. I am only interested in it for the "Bling" factor. I am truely running out of pontenial mods I guess!!
Last edited by 70MACH1OWNER; 12/4/09 at 04:39 PM.
#9237
Mach 1 Member
Powdercoat. I have a contact back home in WI that does good work.
#9239
Good God man it will cost me a fortune to get that disco ball paint off them valve covers!!!! On a different subject. Darrell bought himself some wax for an early Xmas present and I am also looking for one but the search function in the mod section really sucks. Who has the cheapest price on a TCI autoshifter these days? I searched Brenspeeds site and can't even get a hit. The last time I saw it there it said "call for current price". I am thinking I saw it for around $330 bucks. I am only interested in it for the "Bling" factor. I am truely running out of pontenial mods I guess!!
CJ Pony 339.99 and they are having a 10% off sale now. 305 and change
or
http://cgi.ebay.com/ebaymotors/05-08...Q5fAccessories
Last edited by dly; 12/4/09 at 06:35 PM.