I'm starting calling it Con-Fusion key.

 

Con-Fusion key , Looks like it'll work on any '07+ but not on '05 or '06's

 

Works perfectly on my early build (june 2006) '07. The two new keys as well as the old keys and remote all work just fine. The only mistake I made was that I locked every key I own inside the car when I was finished! I was having a problem programming PATS on the last original key so I needed to consult the shop manual which was in my trunk.....I popped the trunk from inside, then shut the door behind me without realizing that the last step in process does an auto lock. So then I needed to go back to my dealer and have him cut me an entry key so I could unlock the car and get everything out!

 

That's why I had the local hardware store cut me a flat entry only key, my worry was locking my keys in the trunk. I keep it in my wallet.

BB
Semper Fi

 

I ordered mine off ebay. Got it for 46.95.

Everything works perfectly.

I have an 07 GT.

 

I had an idiot in one of my classes try to call me out saying I don't drive a Mustang because I have the wrong key.

 

Kick his ***.

 

I didn't even bother correcting him, I just turned around.

 

Works like a charm here in my 07 GT. Home depot dude wasn't sure what "cassette" letter to put it in, we gambled and went with A, works just fine and he didn't charge me. Oh, and I don't think the instructions are clear enough on RKE programming, you need to press a button on each of your remotes during programming or else you'll lose the other two remotes but gain your new one!

 

 

hahhahhha what an a**clown

 

Hello,
i am new here and have the following problem.
Unfortunately, I do not speak well in English.
I try it.

Just purchased blank FUSION Keyfob from E-bay...
Key was cut. - Key programmed just fine - Car started first time with NEW key

But NONE of the remote functions work at all.
Vehicle GT Jul/2006 MY2007

I have tried it with these instructions.

1. Ensure the vehicle is electronically unlocked.
2. Put the key in the ignition.
3. Cycle eight times rapidly (within 10 seconds) between the 1 (OFF/LOCK) position and 3 (ON).
Note: The eighth turn must end in the 3 (ON) position. The doors will lock, then unlock, to confirm that the programming mode has been activated.
4. Within 20 seconds press any button on the remote entry transmitter.
Note: If more than 20 seconds have passed you will need to start the procedure over again.
The doors will lock, then unlock, to confirm that this remote entry transmitter has been programmed.
........................

But, after the step 3 he becomes do not programming mode confirmed.
Doors do not locked and do not unlocked.

I have asked RemoteHub. Answer: Of all the ones we've sold, the remote funcitons code at the same time as the immobilizer/starter

Maybe you can help me.

Greetings from Germany,
Manfred

 

you have to sit in the car, door closed, you need the original two remotes you got with your car. now sit in the car, hit unlock on an original remote twice. next insert a n original key (probably makes no difference, but i always do) turn from 1 to 3 8 times within ten seconds and stop on the last time with the key in 3. hit a button on each of the original two remotes, and then withing 20 seconds between each next remote. and it should work. did on mine

 

You don't turn the key 8 times, you cycle 8 times. So you turn it off and on 8 times (16 total turns) then one additional turn to the on position and it has to be quick. You're probably only turning the key 8 times total.

I did the same thing, btw.

 

Thank you for the answers.
Tonight I test.

 

I bought the Lincoln key because it was cheaper and it works perfectly on my 9/06 build 07 Mustang GT.

 

Hello.

Many thanks for the help. Now the remote key functions. I am happy.
My mistake was, I did not turn the key fast enough.

Greeting Mesh

 

It would be interesting to know, which parts must be replaced in an 05 or 06 Mustang, so that the programming of the remote-key will work...

 

my guess is whatever recieves the signal from the remote

 

Dude, it's just a key. You're willing to start swapping out control modules just to get a $50 key to work?