Factory Engine Cover $$$$$$$$$
#441
Mach 1 Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Ok Kev, quit teasing! What have you got for the valve covers? The paint I found doesn't match perfectly, it's a little too dark, but in the engine compartment it won't be obvious (I hope). Now I want to wait and see what you've got up your sleeve first!
BTW, the paint is Dupli-Color High Performance Wheel Coating, WP102 Graphite, which is supposedly resistant to "chemicals, heat, and chipping". Ok, so not exactly "high heat", but better than regular spray paint.
BTW, the paint is Dupli-Color High Performance Wheel Coating, WP102 Graphite, which is supposedly resistant to "chemicals, heat, and chipping". Ok, so not exactly "high heat", but better than regular spray paint.
#442
Originally Posted by Mtang78
Quick question -- can these new covers be painted since the mustang logo, etc. is already mounted? Any idea on cost to paint?
#443
Originally Posted by Mtang78
Quick question -- can these new covers be painted since the mustang logo, etc. is already mounted? Any idea on cost to paint?
#444
Shelby GT350 Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: May 17, 2005
Location: Chesapeake, VA
Posts: 2,072
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fastball25
Oooohhhh!!!! Please tell me it matches the engine cover! Mineral Grey GT, MG Engine cover, and MG valve covers. That would rock!!!
I never could find a pic with the cover and a Mineral Grey car, so here it is for those that have been wondering:
Last edited by Hatchman; 3/7/08 at 05:09 AM.
#445
Originally Posted by 05stangkc
What Brand and Color Paint did you Find???? BTW Stay Tuned for a Valve Cover Mod that will Knock Your Socks Off! You Will Like it!
kc
kc
I'm glad I noticed this, I was just on my way to the powdercoater.
My friend just got a set of FRRP chrome valve covers and he was going to lend me his as a core replacement. It sounds like I should hold off on this from waht you are saying. I can't wait to see what you have. Please let us know ASAP.
#446
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: June 9, 2005
Location: Detroit Metro Area
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
Another extremely satisfied Engine Intake Cover owner. Simple to install and looks great. Color match with Tungsten Grey is pretty good. Thanks Kevin, for the cover and all the other goodies.
#447
The Analog Admin!
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,693
Received 2,992 Likes
on
2,199 Posts
please Read Sig For Cover Update!
kc
kc
#448
The Analog Admin!
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,693
Received 2,992 Likes
on
2,199 Posts
To order cover!
email to clevparts@aol.com
In the Subject Line Put ENGINE COVER ORDER
If you Posted your Desire to order your Cover in Forum please put post #
Please Submit
Name
Shipping Address
C/C Billing Address {indicate if same}
Daytime Phone Number!
I will contact you for C/C Info as or if Needed.
Thanks!
KC
Be Aware I have a Backlog of emails at the Moment and I will answer asap. You Guys are Really Keeping me Hopping!
__________________
email to clevparts@aol.com
In the Subject Line Put ENGINE COVER ORDER
If you Posted your Desire to order your Cover in Forum please put post #
Please Submit
Name
Shipping Address
C/C Billing Address {indicate if same}
Daytime Phone Number!
I will contact you for C/C Info as or if Needed.
Thanks!
KC
Be Aware I have a Backlog of emails at the Moment and I will answer asap. You Guys are Really Keeping me Hopping!
__________________
#451
Team Mustang Source
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Originally Posted by 05GT-O.C.D.
Here's a cool setup.
I know, everything's dirty... and my camera takes crappy pics that makes it look even worse.
Cannon Powershot =
WMS and Plenum Cover =![Thumb](https://themustangsource.com/forums/images/smilies/thumb.gif)
I know, everything's dirty... and my camera takes crappy pics that makes it look even worse.
Cannon Powershot =
![Thumbsdown](https://themustangsource.com/forums/images/smilies/thumbsdown.gif)
WMS and Plenum Cover =
![Thumb](https://themustangsource.com/forums/images/smilies/thumb.gif)
![Thumb](https://themustangsource.com/forums/images/smilies/thumb.gif)
#453
The Analog Admin!
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,693
Received 2,992 Likes
on
2,199 Posts
Ck sig for Cover Order Update!
#456
![Talking](https://themustangsource.com/forums/images/icons/icon10.gif)
I read the Shelby GT500 works but you have to mod the hood - do not want to do this. Also what is the price including shipping to Miami, 33193?
With all the hardware of course.
With all the hardware of course.
#457
The Analog Admin!
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,693
Received 2,992 Likes
on
2,199 Posts
Originally Posted by 05GT-O.C.D.
Here's a cool setup.
![](http://www.2005stang.com/gallery/albums/userpics/10100/WMS%20Powered%20by%20Ford%20003.jpg)
I know, everything's dirty... and my camera takes crappy pics that makes it look even worse.
Cannon Powershot =
WMS and Plenum Cover =![Thumb](https://themustangsource.com/forums/images/smilies/thumb.gif)
![](http://www.2005stang.com/gallery/albums/userpics/10100/WMS%20Powered%20by%20Ford%20003.jpg)
I know, everything's dirty... and my camera takes crappy pics that makes it look even worse.
Cannon Powershot =
![Thumbsdown](https://themustangsource.com/forums/images/smilies/thumbsdown.gif)
WMS and Plenum Cover =
![Thumb](https://themustangsource.com/forums/images/smilies/thumb.gif)
#458
Mach 1 Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Okay, I painted my cam covers to match my plenum cover, and the color doesn't match, just as I expected. My solution is to paint the plenum cover to match the cam covers (a much easier task, I am sure). My question is: can I remove the pony without damaging it, or will I have to mask the pony off? The feet were lifting up a bit on the horse when I got it from Ford in the first place, so I'd like to fix that, but my second question is: how do I reattach it? Incidentally, I found some really cool brushed aluminum look vinyl at a sign shop that I think I'll try to re-do the fins and lettering in. Whatcha think?
#459
I lust for a M24
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: November 6, 2004
Location: Football HOF, Canton OH
Posts: 7,045
Likes: 0
Received 4 Likes
on
4 Posts
Originally Posted by Lokius
That intake is insane, do you get larger gains with that than say a C&L or JLT?
C&L 25/20
JLT 27.9/21.5
WMS 23.4/20.4
So, JLT is the clear winner, C&L provides more hp, but WMS provides more torque. With the numbers that close and on a dyno, the actual numbers on the street could be nearly identical. In the looks cool category, WMS is the clear winner IMO.
![Topic](https://themustangsource.com/forums/images/smilies/topic.gif)
![Thumb](https://themustangsource.com/forums/images/smilies/thumb.gif)
#460
The Analog Admin!
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Thread Starter
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,693
Received 2,992 Likes
on
2,199 Posts
Originally Posted by backafter20
Okay, I painted my cam covers to match my plenum cover, and the color doesn't match, just as I expected. My solution is to paint the plenum cover to match the cam covers (a much easier task, I am sure). My question is: can I remove the pony without damaging it, or will I have to mask the pony off? The feet were lifting up a bit on the horse when I got it from Ford in the first place, so I'd like to fix that, but my second question is: how do I reattach it? Incidentally, I found some really cool brushed aluminum look vinyl at a sign shop that I think I'll try to re-do the fins and lettering in. Whatcha think?
kc