Factory Engine Cover $$$$$$$$$
#321
Originally Posted by 05stangkc
I am at Home and do not have the Part Numbers with me. BTW I put in a twelve hour Day at work todayAgain and here I am still plugging. I must be nuts!
If so, have the divorce papers been sent? Unless shes one of those rare finds, and shes into it as you are.
#322
Originally Posted by 05stangkc
Upload Pictures with PicTiger
COVER WITH 2007 SHELBY STRUT BAR IN PLACE. It Clears the Cover but I am Concerened about the Bar itself clearing as I have not seen a Shelby Hood in The Flesh. The Bars are VERY Inexpensive BTW!
#323
Thread Starter
The Analog Admin!
Joined: November 27, 2004
Posts: 11,080
Likes: 3,267
From: Visalia Ca.
Originally Posted by Stoenr
Lol, please tell me your not married!
If so, have the divorce papers been sent? Unless shes one of those rare finds, and shes into it as you are.
If so, have the divorce papers been sent? Unless shes one of those rare finds, and shes into it as you are.
#324
Originally Posted by bpmurr
Could you please be so kind as to provide those of us who have bought the cover from other sources the part numbers for the stud and nut. This post is like a tease. lol
The stud number is W710464-S437. I am not quite sure how many you will need. I was told 8.
Actually this number was given out twice before in the post, all in between the speculation of whether a tower brace would fit.
#325
Originally Posted by bigplayrayr
The stud number is W710464-S437. I am not quite sure how many you will need. I was told 8.
Actually this number was given out twice before in the post, all in between the speculation of whether a tower brace would fit.
Actually this number was given out twice before in the post, all in between the speculation of whether a tower brace would fit.
#326
Thread Starter
The Analog Admin!
Joined: November 27, 2004
Posts: 11,080
Likes: 3,267
From: Visalia Ca.
Host Images with PicTiger CLICK TO ENLARGE!
Time to End any Confusion. I Installed one this Morning! Here are the CORRECT Part numbers and Torque Specs. This is INCH Pounds Remember NOT FOOT Pounds! You need Qty 2 Part# w520411-s437 5mm Flanged Nuts and Two W712289-s437 Step Studs 6mm at the Base 5mm at the top! PIC 3 is 05/06 Bolt vs 07 Stud. Side NoteYour Local Dealer will probably want to sell you Package Quantities. The Studs come Pack o Two and the Nuts Pack o four!
kc
#327
Thread Starter
The Analog Admin!
Joined: November 27, 2004
Posts: 11,080
Likes: 3,267
From: Visalia Ca.
Picture Album with PicTiger
Yes My Motor is Dirty! The Car is getting traded in a week or so! Here are all the Mounting points. NOTE on the 07 they Do not have the Little Wiring Snap mount no the Passenger Side do not sweat it.
BTW, There are 218 Covers on B/O at Ford this Am. Close to a Hundred are mine. They will trickle in every week in the Order I placed my order with Ford. The Hardware is also on Back Order and I notified Customer Service they would need to Beef Up Demand.
Note!!!!!!!! I wanted to make Absolutely Sure these were going to work before posting part numbers. People seem to take my posts as gospel and I did not want the Wrong Info going out and people ordering a ton of wrong hardware ! It would not have been good. The other part Numbers floating around are an example of this. I am sure some have ordered these and they are wrong!
#328
Thread Starter
The Analog Admin!
Joined: November 27, 2004
Posts: 11,080
Likes: 3,267
From: Visalia Ca.
If you are happy with this Info and found it useful Please send one dollar to HAPPY GUY attention Homer Simpson!LOL
Off to Work for another Saturday Round of Catch up! Think I will take the 05 for one of our Last Drives before the 07 Hits!
kc
Off to Work for another Saturday Round of Catch up! Think I will take the 05 for one of our Last Drives before the 07 Hits!
kc
#330
Thread Starter
The Analog Admin!
Joined: November 27, 2004
Posts: 11,080
Likes: 3,267
From: Visalia Ca.
Originally Posted by Stoenr
Thanks KC, so 1 bag of each is what we should get? And donate extra pieces to other TMC'rs!
#331
Thread Starter
The Analog Admin!
Joined: November 27, 2004
Posts: 11,080
Likes: 3,267
From: Visalia Ca.
Originally Posted by Hatchman
Looks like it clears the Cover easily. Are you concerned about it clearing the Shelby hood or the regular hood? Looks like that is on your '05, and I would think the Shelby Strut bar would clear the Shelby Hood. Is that part on your hot sheet? Looks simple and effective.
#332
Thread Starter
The Analog Admin!
Joined: November 27, 2004
Posts: 11,080
Likes: 3,267
From: Visalia Ca.
#333
Thread Starter
The Analog Admin!
Joined: November 27, 2004
Posts: 11,080
Likes: 3,267
From: Visalia Ca.
UPDATE!!!!!!!!!!!!!!!!!!!
I ran my Ford Monthly PARTS update Price Tape Last night and am Slowly Filtering out the MUSTANG PARTS PARTS PRICE INCREASES. I got SOME BAD NEW ON THE ENGINE COVER! It went UP!!!!!!!!!!!!!!!!!!!!!!!!!!!!
$1.24 Anybody want to cancel??? LOL
I was Afraid it would Double or triple in Price! It still could at some Point! But we are Safe for July it Seems!
Enjoy ,
kc
I ran my Ford Monthly PARTS update Price Tape Last night and am Slowly Filtering out the MUSTANG PARTS PARTS PRICE INCREASES. I got SOME BAD NEW ON THE ENGINE COVER! It went UP!!!!!!!!!!!!!!!!!!!!!!!!!!!!
$1.24 Anybody want to cancel??? LOL
I was Afraid it would Double or triple in Price! It still could at some Point! But we are Safe for July it Seems!
Enjoy ,
kc
#334
I ordered the studs and nuts today. $11 plus tax. Stupid markups! They look like something you could get at a hardware store for $2 total. Parts guy said he didn't trust someone else's part numbers, but he couldn't find his own, so he had to take Kevin's. It worked ok, but the price seems a bit much.
#335
Haha Jim, that's why I printed out Kevins picture of the parts bag and brought it in with me to order.
They are right tho not trusting someone else part #
I cant count the times I called one dealer for a part, they didn't have, they run it on the locator for me, have our driver go pick it up and whadya know, wrong part.
They are right tho not trusting someone else part #
I cant count the times I called one dealer for a part, they didn't have, they run it on the locator for me, have our driver go pick it up and whadya know, wrong part.
#338
Originally Posted by bpmurr
Well my cover finally showed up today. Now I'm just waiting on the mounting hardware. Here is a pic I took with my camera phone.
#339
Originally Posted by NuPony05
I responded on February 10th that I had to have one of those. Where does that place me in line Kevin????
#340
Thread Starter
The Analog Admin!
Joined: November 27, 2004
Posts: 11,080
Likes: 3,267
From: Visalia Ca.
Order Info
Originally Posted by 05stangkc
REFERENCE FROM POST 242 on ORDER LIST.
The Covers should be releasing soon. This is an old topic and some have emailed or posted their desire to purchase this cover. I am sure some no longer want this cover and some may have slipped through the cracks as far as being on my list. Also your C/C and Shipping Address info may have changed! At this time the covers are still dirt cheap and I believe they will come with all the hardware. I do not know at this time if it will clear strut braces. Also it is my belief they will be the dark version as shown in the last pic posted. To verify my list and add those who want to order the cover please do the following.
email to clevparts@aol.com
In the Subject Line Put ENGINE COVER ORDER
If you Posted your Desire to order your Cover in Forum please put post #
Please Submit
Name
Shipping Address
C/C Billing Address {indicate if same}
Daytime Phone Number!
I will contact you for C/C Info as or if Needed.
Thanks!
KC
Be Aware I have a Backlog of emails at the Moment and I will answer asap. You Guys are Really Keeping me Hopping!
__________________
The Covers should be releasing soon. This is an old topic and some have emailed or posted their desire to purchase this cover. I am sure some no longer want this cover and some may have slipped through the cracks as far as being on my list. Also your C/C and Shipping Address info may have changed! At this time the covers are still dirt cheap and I believe they will come with all the hardware. I do not know at this time if it will clear strut braces. Also it is my belief they will be the dark version as shown in the last pic posted. To verify my list and add those who want to order the cover please do the following.
email to clevparts@aol.com
In the Subject Line Put ENGINE COVER ORDER
If you Posted your Desire to order your Cover in Forum please put post #
Please Submit
Name
Shipping Address
C/C Billing Address {indicate if same}
Daytime Phone Number!
I will contact you for C/C Info as or if Needed.
Thanks!
KC
Be Aware I have a Backlog of emails at the Moment and I will answer asap. You Guys are Really Keeping me Hopping!
__________________