ABS Honeycomb taillight panel - SilverHorse Racing
12/3/05, 06:17 AM
#122
I thought about photos.
However, since my baby is Performance White, the previously posted photos of the sample panel by Marcello on the rear of his Performance White GT look exactly the same as how the panel looks on my baby. Plus Marcello apparently has a better camera that I do.
So, just look back at the previous posted photos and that is how the panel looks on mine.
RCW
12/3/05, 07:58 PM
#123
Legacy Tms Member
Thread Starter
RCW,
Thanks man, I only have a decent camera because I write for Mustang Enthusiast magazine, and it is kind of a requirement if you want to be able to do some of the more photo-intensive work that is required.
As to the temperature thing everyone...
What is in the directions is what we were told by 3M. We're not saying you can't use a heated garage and make it happen, or other methods, just that we recommend you follow the advice of the tape manufacturer when it comes to adhesion temperatures. How you achieve that is up to you, and of course due to the nature of the society we live in today, if we told people to use a blow dryer or a heat gun or something, someone would spill hot coffee on themselves while doing it and then blame us, so we tried to keep that stuff out of our general directions.
BTW, as everyone receives their parts, if your particular feedback time hasn't expired on EBay, we'd appreciate the positive (we hope) feedback if you could leave it for us. Everyone who pre-ordered received positive feedback at the time of their particular auction, and since we haven't done anything really since getting this going, our feedback has been hovering for about 3-4 months now.
Thanks again, and keep the pictures coming on different colored cars and different models!
Thanks man, I only have a decent camera because I write for Mustang Enthusiast magazine, and it is kind of a requirement if you want to be able to do some of the more photo-intensive work that is required.
As to the temperature thing everyone...
What is in the directions is what we were told by 3M. We're not saying you can't use a heated garage and make it happen, or other methods, just that we recommend you follow the advice of the tape manufacturer when it comes to adhesion temperatures. How you achieve that is up to you, and of course due to the nature of the society we live in today, if we told people to use a blow dryer or a heat gun or something, someone would spill hot coffee on themselves while doing it and then blame us, so we tried to keep that stuff out of our general directions.
BTW, as everyone receives their parts, if your particular feedback time hasn't expired on EBay, we'd appreciate the positive (we hope) feedback if you could leave it for us. Everyone who pre-ordered received positive feedback at the time of their particular auction, and since we haven't done anything really since getting this going, our feedback has been hovering for about 3-4 months now.
Thanks again, and keep the pictures coming on different colored cars and different models!
12/3/05, 08:18 PM
#124
Team Mustang Source
Originally posted by pjdami@December 2, 2005, 11:32 PM
Well, I just ordered my honeycomb taillight panel. I also ordered the rear taillight chrome bezel trim kit for even more of the retro look. I think it will compliment the honeycomb panel, the chrome fake gascap, and the chrome tips on my JBAs with my black top vert. I'll post pics when I get everything in.
Well, I just ordered my honeycomb taillight panel. I also ordered the rear taillight chrome bezel trim kit for even more of the retro look. I think it will compliment the honeycomb panel, the chrome fake gascap, and the chrome tips on my JBAs with my black top vert. I'll post pics when I get everything in.
I've already got the taillight trim and MRT's tips for my mufflers. Just waitin' on my panel
12/3/05, 08:24 PM
#125
Legacy Tms Member
Thread Starter
Hey now... I hope that's drool and not choking in that last post!
We've got enough stock now to fill all the orders, and I expect them to be out by Tuesday or Wednesday. WE just wrapped the PRI show this evening, so I'm going to call it a night at this point.
We will be up and at 'em tomorrow morning preparing shipments to go out Monday. Keep checking your inboxes!
We've got enough stock now to fill all the orders, and I expect them to be out by Tuesday or Wednesday. WE just wrapped the PRI show this evening, so I'm going to call it a night at this point.
We will be up and at 'em tomorrow morning preparing shipments to go out Monday. Keep checking your inboxes!
12/5/05, 07:28 PM
#127
Legacy Tms Member
Thread Starter
Originally posted by tucsondivots@December 5, 2005, 8:20 PM
Marcello,
Are the pre-orders all shipping this week?
tucsondivots
Marcello,
Are the pre-orders all shipping this week?
tucsondivots
We're averaging about 30 a day at the moment, hopefully will get up to more, but it seems we keep needing to stop for this or that and it takes away from packaging time.
We're also having trouble with the email notification system we're trying to use, but hopefully we'l get the bugs out of it quick enough. In the meantime, we're just emailing everyone as their parts get stacked for pickup / delivery.
12/5/05, 08:48 PM
#128
Bullitt Member
Join Date: October 16, 2004
Location: Des Moines
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
Hey tucsondivits! i got my fuel door, thanks to you...
and i spent the weekend prepping for my honey...
made this myself. bad camera, lines are fine and perfect. some may like it plain / no #s or letters / like the right side...anybody like? check w me...honey will finish it!
remind ya of a 69 mach?
rickman@showlenses.com
and i spent the weekend prepping for my honey...
made this myself. bad camera, lines are fine and perfect. some may like it plain / no #s or letters / like the right side...anybody like? check w me...honey will finish it!
remind ya of a 69 mach? rickman@showlenses.com
12/5/05, 08:48 PM
#129
Team Mustang Source
Originally posted by SilverHorseRacing@December 3, 2005, 10:27 PM
Hey now... I hope that's drool and not choking in that last post!
Hey now... I hope that's drool and not choking in that last post!
12/5/05, 11:37 PM
#130
Legacy Tms Member
Thread Starter
Ok, well since you put it that way...
We're working through September tonight and tomorrow. On par for everyone to be taken care of by Friday at the latest.
I expect some more pictures soon! My website is kind of dull with just our car on there!
We're working through September tonight and tomorrow. On par for everyone to be taken care of by Friday at the latest.
I expect some more pictures soon! My website is kind of dull with just our car on there!
12/6/05, 12:38 AM
#131
Team Mustang Source
Join Date: August 8, 2005
Location: Georgia
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Got the e-mail today, mine is on the way! WOOT! Pics coming ASAP! Tungsten with Black stripes and the Honeycomb Panel, should look awesome
P.S. rdh03mach1, your car has a dirty bum..... But I like the vinyl, looks good, wash the bumper....
P.S. rdh03mach1, your car has a dirty bum..... But I like the vinyl, looks good, wash the bumper....
12/6/05, 03:05 PM
#133
Mach 1 Member
Join Date: April 2, 2005
Location: Burkburnett, TX
Posts: 748
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by BurntPony@December 6, 2005, 11:54 AM
...I wonder what this looks like on a Redfire Mustang...
...I wonder what this looks like on a Redfire Mustang...
Redfire w/HoneyComb Panel
12/7/05, 06:45 PM
#136
Legacy Tms Member
Thread Starter
That's it!!!
ALL Pre-orders are going out in the morning. Anyone who didn't receive an email, please contact me so I can double check our records, but we went from our hardcopies, so everyone should be good.
Now to catch up on all the new orders!!
ALL Pre-orders are going out in the morning. Anyone who didn't receive an email, please contact me so I can double check our records, but we went from our hardcopies, so everyone should be good.
Now to catch up on all the new orders!!
12/8/05, 07:38 AM
#137
Bullitt Member
Join Date: October 16, 2004
Location: Des Moines
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by SilverHorseRacing@December 7, 2005, 7:48 PM
That's it!!!
ALL Pre-orders are going out in the morning. Anyone who didn't receive an email, please contact me so I can double check our records, but we went from our hardcopies, so everyone should be good.
Now to catch up on all the new orders!!
That's it!!!
ALL Pre-orders are going out in the morning. Anyone who didn't receive an email, please contact me so I can double check our records, but we went from our hardcopies, so everyone should be good.
Now to catch up on all the new orders!!
12/8/05, 12:33 PM
#138
Mach 1 Member
Join Date: November 15, 2004
Location: Victoria BC
Posts: 683
Likes: 0
Received 0 Likes
on
0 Posts
Mine finally showed up today after sitting at the border for a week. All I have to say is the part looks FANTASTIC!!! I held it up to my car's bum and it's going to look great... after the snow melts and it's warmer than the -8C it's at today, that is. 
For anyone that's on the fence on this product, buy one now! Now that it's in my hands I can attest to the quality and the heft of it. I would have paid twice what I did for it and still felt like I was getting a deal! BUY ONE NOW! NOW, NOW, NOW!!!!
Great job Marcello! Here's looking forward to whatever you dream up next!
For anyone that's on the fence on this product, buy one now! Now that it's in my hands I can attest to the quality and the heft of it. I would have paid twice what I did for it and still felt like I was getting a deal! BUY ONE NOW! NOW, NOW, NOW!!!!
Great job Marcello! Here's looking forward to whatever you dream up next!
12/8/05, 07:07 PM
#140
V6 Member
Join Date: May 23, 2005
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Another Legend Lime got one today too! Well worth the wait. I hope Silverhorse Racing make a ton of money so they keep great products coming.Not sure I like the chrome tail light trim yet, Birthday present from a friend.