bob

Didn't care about R/T, was more concerned with how fast the car would go and how to get it off the line wihtout to much spin. I got 16 runs in that day and the very first was about 15.30 IIRC

Modular81

Good runs, You should be going through the 1/4 mile traps in third gear on the stock tune and a bone stock car. Shifting to fourth just before the finish will hurt your times. The trap speed difference from when you drove and then your buddy drove your car is directly indicative of the 155lbs weight advantage he has over you. A lighter car will accelerate faster thus improving et's and mph trap speeds.

mot250

13.257 @109.36

C&L Racer CAI, Brenspeed SCT2 93 oct tune, Steeda UDPs. 18 inch fanblades with stock street radials

I scared the Camaro into redlighting. That's my story and I'm sticking to it.

lastglh

Ran my 06 Friday night 04/13/07 at cecil county dragway in MD, this was my best time so far.

R/t .513
60' 1.717
330 5.123
1/8 7.975
mph 86.37
1000 10.449
1/4 12.533
mph 108.32

don_w

Excellent run!!

hiznherponies

Finally!! Almost great weather for racing in MI!! (It was really windy, and almost dead headwinds at that!! Look at the flags in the first pic!!) Got some E.T. Street Drag Radials for my car and tried them out today. Got a total of 15 runs in, here's the best one!!
60 ft. 2.105
330 ft. 5.867
1/8m ET 8.971
1/8mph 79.37
1/4 ET 13.99 New Personal Best!!!
1/4 mph 96.92

Quick question, how do you convert 1/8 mi. to 1/4 mi. times? Wind was soo bad, that the track officials decided to stop the full runs for safety concerns. BTW, the Cobra was either asleep at the light or he spun real bad, but he barely got me at the line (just by a fender) on one of the 1/8 mi. runs

DavidM

Here is a conversion table that I found.

http://www.rangerpowersports.com/tech/?p=10

don_w

That one agrees with my data fairly well. I have a database of over 300 runs, and I come up with an average multiplier of 1.553 with a standard devaition of 0.0183. For simplicity (and since it's far from an exact predictor), I generally just use 1.55 times the 1/8-mi ET to estimate the 1/4-mi ET.

mot250

I know there is a lot of ET data here and a big THANK YOU goes out to Galaxie for starting and updating the list in the first post .

Does anyone else see a benefit of at least adding whether or not their times were on street radials, drag radials or slicks to the times listed in post #1?

(ex: #XX 13.786 @ 104.5 member xyz - street radials)


I don't want it to become too much of a hassle to maintain but it might help people compare how they are truly doing.

Just a thought.

Now, back to the ETs...

hiznherponies

Hey, thanks for the conversion tables!!! Don, I'll try that 1.55 conversion factor when I'm at the track next time!!! According to the tables, I made 5 runs between 13.95 and 13.99, SWEET!!! Now, I weigh 260-265 lbs. so I'm sure thats holding me back some but its not gonna change anytime soon. The weather is probably a contributing factor too (it was only 50-55 F and wind was blowing almost straight down the track at me, between 10-20 mph). I'm hoping more experience and better conditions get me down to 13.7 or so!!!

dustindu4

12.729 @107.07

Enfynet

First run ever!

13.451 @ 105.94
2.15 60ft
Street radials

Modular81

Took my 06 to the track saturday 4/28/07. A local mustang club rented it out for the day. There were one or two TMS members out there as well. Got in a total of eight runs, here are my two best times of the day. 4.10 gears and lightweight aluminum driveshaft are my next two mods, hopefully they will put me in the 12.80-12.90 range on stock rubber.

60ft' 2.005
330' 5.593
1/8' 8.512
MPH 83.84
1000' 11.056
1/4'et 13.181
MPH 106.23

60ft' 2.032
330' 5.623
1/8' 8.538
MPH 84.00
1000' 11.077
1/4'et 13.190
MPH 106.40

06GT

Post #1 needs to be UPDATED

Galaxie

Sorry for not checking in... post #1 will be updated in the next few days

DavidM

Finally some recognition. LOL

enitalp

Yeah and if you modify the first page don't forget to make some room for me in higther place, my car is going to get some modification next week, can't wait to check at the track.

;p

DavidM

jp's performance

put some bolt ons the wifes 07 gt,jms chip cai,x-cal2,3.73's,o/r xpipe,flowmasters.and i bolted on my 26x11.5x17 et streets bias ply tires.it weghts 3795 shaker1000 in the trunk no spare.Attachment 25953

13 MIKE

All right heres mine.
H.O. WHIPPLE, 4.10's, 295 dr's, half tank of gas and everything in the trunk. 12.002@120
http://i53.photobucket.com/albums/g5...G/scan0008.jpg