Ponies on The Run (Again)
#1541
Originally Posted by 89Trooper
Here's the email address to use on Pay Pal for the MUSTANG Letters:
sales@dynojoe.com
Send a payment for $24.95 and specify what color you want (I was thinking -- if you think the red and blue won't match the TR and the VB, maybe get Matte Black like me to match the shaker)...
sales@dynojoe.com
Send a payment for $24.95 and specify what color you want (I was thinking -- if you think the red and blue won't match the TR and the VB, maybe get Matte Black like me to match the shaker)...
I just beamed him a payment thru Paypal.
After thinking it over, I decided to go with the MATTE BLACK letters! When I open up the hood, I want to send a message that I mean business! No Sissy Mary red fingernail polish look for me, going Sinister all the way!
#1543
Another Letter Update!
OK, the guy called me and said if any of the "shaker" people wanted 2 sets of letters (1 for the shaker, and 1 for the door) that he would give them the discount price of $20 per set ($40 total). If you order 1 set it is $24.95.
Make sure you tell him the color choices in the Pay Pal order.
I'm going to do the 2 sets... both Matte black.
Make sure you tell him the color choices in the Pay Pal order.
I'm going to do the 2 sets... both Matte black.
#1544
Thread Starter
Shelby GT350 Member
Joined: January 17, 2006
Posts: 2,061
Likes: 0
From: Tornado Alley
Originally Posted by TacoBill
Thanks Tom!
I just beamed him a payment thru Paypal.
After thinking it over, I decided to go with the MATTE BLACK letters! When I open up the hood, I want to send a message that I mean business! No Sissy Mary red fingernail polish look for me, going Sinister all the way!
I just beamed him a payment thru Paypal.
After thinking it over, I decided to go with the MATTE BLACK letters! When I open up the hood, I want to send a message that I mean business! No Sissy Mary red fingernail polish look for me, going Sinister all the way!
Opinions?
Vista Blue (or close to it)
or
Matte Black
Tom the Mach 1 Style wheels would look awesome. You change your mind like a **** woman
#1545
Originally Posted by OKCMustangGT
Hmm what about sissy Mary VB ? You got me thinking now.
Opinions?
Vista Blue (or close to it)
or
Matte Black
Tom the Mach 1 Style wheels would look awesome. You change your mind like a **** woman
Opinions?
Vista Blue (or close to it)
or
Matte Black
Tom the Mach 1 Style wheels would look awesome. You change your mind like a **** woman
I would have gotten those rims in the first place if I knew I was heading in the Mach 1 direction.
#1547
Originally Posted by OKCMustangGT
Hmm what about sissy Mary VB ? You got me thinking now.
Opinions?
Vista Blue (or close to it)
or
Matte Black
Opinions?
Vista Blue (or close to it)
or
Matte Black
I highly recommend this combo!
I'll post a little write-up soon.
#1548
Originally Posted by st06vert
Just want to give a shout out to bill for your tips and help. Frpp fits like a glove and sounds really good. It took me 1 hour because of that one bolt on the left side. Its loud and no more girlie car here.
You're very welcome. We're all here to help each other.
#1549
Originally Posted by 89Trooper
Mike (KdF), if you are interested in the letters for the door sills, let me know. I think Susan is getting them in red for the door sills, and Bill, Daryl, and I are getting them for the shaker engine cover in red, blue, and black respectively. I'm sure we'll all post some pics when they're on.
#1551
Shaker scoop emblem installation
Just installed my new '281' emblems on my Shaker scoop.
Bought them from Autobadges.com for $10 each.
I think they look rather nice!
There's different ways of installing decals and emblems, from the one eye method to the measuring tape; I used both.
Also, there's the question of how far forward (or back) should the emblem be on the scoop. The 69/70 Shaker scoops had their CID emblems near the front of the scoop opening and the center reserved for any script emblems (e.g. Cobra Jet). I placed the leading edge of the emblem even with the top center cooling fin/rib. As far as up and down, I just chose it to be closer to the lower half.
Here's how I installed them:
* Wipe the general area where the emblem is to be placed with alcohol.
* Lay down a strip of masking tape perpedicular to the center scoop rib line.
* Place the emblem's forward edge against the masking line using some tape to hold it in place. Up/down location as well as clocking (leveling) should be done at this point as well.
(This is where I spent most of my time scratching my head trying to decide how I wanted the emblem to be clocked. Follow the scoop line or true level? I did both and always stepped back to see how I liked it. What looked good to me was a combination of both.)
* Place another strip of masking tape (perpendicular) over the tape holding the emblem. This will ensure that the emblem will swing back down into the layout position with minimal shifting.
* Lift up the emblem just high enough to remove the 3M backing.
* Swing the emblem back down onto the scoop.
* Apply pressure evenly across the emblem to seat the tape.
Note: Once one side is complete, take some measurements at various spots and duplicate it for the other side to ensure a mirror image.
Emblem is made of plastic, so it can follow the slight contoured surface of the scoop. The corner edge may have a little trouble sticking, but I think once out in the sun and the adhesive heats up a bit you can press down on the corners to have them stick. That 3M tape that's used is some pretty strong stuff.
This simple and inexpesive mod really draws attention to the Shaker scoop (like it already didn't! )
Once the Matte Black letters go on the shroud sills, it'll provide a nice reverse contrast to the 281 emblems. I think they'll look way cool together!
Bought them from Autobadges.com for $10 each.
I think they look rather nice!
There's different ways of installing decals and emblems, from the one eye method to the measuring tape; I used both.
Also, there's the question of how far forward (or back) should the emblem be on the scoop. The 69/70 Shaker scoops had their CID emblems near the front of the scoop opening and the center reserved for any script emblems (e.g. Cobra Jet). I placed the leading edge of the emblem even with the top center cooling fin/rib. As far as up and down, I just chose it to be closer to the lower half.
Here's how I installed them:
* Wipe the general area where the emblem is to be placed with alcohol.
* Lay down a strip of masking tape perpedicular to the center scoop rib line.
* Place the emblem's forward edge against the masking line using some tape to hold it in place. Up/down location as well as clocking (leveling) should be done at this point as well.
(This is where I spent most of my time scratching my head trying to decide how I wanted the emblem to be clocked. Follow the scoop line or true level? I did both and always stepped back to see how I liked it. What looked good to me was a combination of both.)
* Place another strip of masking tape (perpendicular) over the tape holding the emblem. This will ensure that the emblem will swing back down into the layout position with minimal shifting.
* Lift up the emblem just high enough to remove the 3M backing.
* Swing the emblem back down onto the scoop.
* Apply pressure evenly across the emblem to seat the tape.
Note: Once one side is complete, take some measurements at various spots and duplicate it for the other side to ensure a mirror image.
Emblem is made of plastic, so it can follow the slight contoured surface of the scoop. The corner edge may have a little trouble sticking, but I think once out in the sun and the adhesive heats up a bit you can press down on the corners to have them stick. That 3M tape that's used is some pretty strong stuff.
This simple and inexpesive mod really draws attention to the Shaker scoop (like it already didn't! )
Once the Matte Black letters go on the shroud sills, it'll provide a nice reverse contrast to the 281 emblems. I think they'll look way cool together!
#1552
Thread Starter
Shelby GT350 Member
Joined: January 17, 2006
Posts: 2,061
Likes: 0
From: Tornado Alley
Originally Posted by TacoBill
Just installed my new '281' emblems on my Shaker scoop.
Bought them from Autobadges.com for $10 each.
I think they look rather nice!
There's different ways of installing decals and emblems, from the one eye method to the measuring tape; I used both.
Also, there's the question of how far forward (or back) should the emblem be on the scoop. The 69/70 Shaker scoops had their CID emblems near the front of the scoop opening and the center reserved for any script emblems (e.g. Cobra Jet). I placed the leading edge of the emblem even with the top center cooling fin/rib. As far as up and down, I just chose it to be closer to the lower half.
Bought them from Autobadges.com for $10 each.
I think they look rather nice!
There's different ways of installing decals and emblems, from the one eye method to the measuring tape; I used both.
Also, there's the question of how far forward (or back) should the emblem be on the scoop. The 69/70 Shaker scoops had their CID emblems near the front of the scoop opening and the center reserved for any script emblems (e.g. Cobra Jet). I placed the leading edge of the emblem even with the top center cooling fin/rib. As far as up and down, I just chose it to be closer to the lower half.
Install Bookmarked.
#1553
Originally Posted by OKCMustangGT
Looks incredible Bill, I think you and Tom, once again, have spent some of my money.
Install Bookmarked.
Install Bookmarked.
#1554
I just a acquired a CDC Classic Chin Spoiler!
Mike is selling me his for $200 compared to the CDC price of $320 ($270 + $50 shipping). Not as good of a deal as Bill's, but I'll take it!
Mike is selling me his for $200 compared to the CDC price of $320 ($270 + $50 shipping). Not as good of a deal as Bill's, but I'll take it!
#1558
Originally Posted by OKCMustangGT
... I think you and Tom, once again, have spent some of my money.
Originally Posted by 89Trooper
I just a acquired a CDC Classic Chin Spoiler!
Mike is selling me his for $200 compared to the CDC price of $320 ($270 + $50 shipping). Not as good of a deal as Bill's, but I'll take it!
Mike is selling me his for $200 compared to the CDC price of $320 ($270 + $50 shipping). Not as good of a deal as Bill's, but I'll take it!
Maybe Mike's getting a Steeda Splitter, looks cool but, it's a driveway scraper.
Originally Posted by KdF
Now how the hades was I unsubscribed to this thread??
Originally Posted by swwake
What pretty TR and VB cars you have! Would you like to Zaino mine?