Ponies on The Run (Again)
#1401
GTR Member
Join Date: January 26, 2006
Location: Central Florida
Posts: 4,639
Likes: 0
Received 0 Likes
on
0 Posts
Let's see... the Mini Cooper S (160 HP) has a 0-to-60 time of 8.4 seconds, and does the quarter mile in 16.6 seconds. And our GT's can go 0-to-60 in 5.1 seconds, with a quarter mile time of 13.5 seconds.
This is from one source, so numbers may vary from source to source.
This is from one source, so numbers may vary from source to source.
#1402
Originally Posted by 89Trooper
Let's see... the Mini Cooper S (160 HP) has a 0-to-60 time of 8.4 seconds, and does the quarter mile in 16.6 seconds. And our GT's can go 0-to-60 in 5.1 seconds, with a quarter mile time of 13.5 seconds.
This is from one source, so numbers may vary from source to source.
This is from one source, so numbers may vary from source to source.
Dan: i have mini on ebay now
Dan: hope to hell someone buys it
Dan: 10000 miles
Dan: cooper s with the john cooper works package...faster than ****
Dan: like a go cart on steroids
Susan: i don't know anything about those
Susan: my car is fast
Dan: the mini would smoke it
Susan: really
Susan: race ya
Dan: really
Dan: it is one **** fast little car
(edited - my apologies for the mild profanity)
#1403
Another source:
Mini Cooper S with John Cooper Works Kit Package
200 BHP (163 BHP stock)
177 FT-LBS Torque (155 FT-LBS stock)
0-60: 6.5 seconds (6.9 stock)
Top Speed: 140 MPH (135 stock)
And the winner is... The 2006 Mustang GT
Mini Cooper S with John Cooper Works Kit Package
200 BHP (163 BHP stock)
177 FT-LBS Torque (155 FT-LBS stock)
0-60: 6.5 seconds (6.9 stock)
Top Speed: 140 MPH (135 stock)
And the winner is... The 2006 Mustang GT
#1404
Shelby GT350 Member
Thread Starter
Join Date: January 17, 2006
Location: Tornado Alley
Posts: 2,061
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by swwake
Dan: the mini would smoke it
Dan: it is one **** fast little car
(edited - my apologies for the mild profanity)
Dan: it is one **** fast little car
(edited - my apologies for the mild profanity)
I say smoke his ***, then just grin and drive off as the wind whips through your blonde hair.
As you mention your car is STOCK and his is the Top of the Line MINI
#1407
It's a race to the Saleen Short Throw Shifter!
This is exciting!
(edit)
Guess I win...
Couldn't wait, so I just placed my order via phone. Unfortunately, Saleen goes to the same school of shipping as Steeda; they can't tell me what the shipping cost is until it ships! Their lame excuse was that they don't know what carrier it'll end up with (UPS, Fed Ex, blah.. blah). They expect it to ship out Friday, so I guess I'll call back then to see what my total is. Steeda pulled the same crap when I ordered the Ultralites. I'm at their mercy, what to do...
Good new for you guys is that they have several in stock.
This is exciting!
(edit)
Guess I win...
Couldn't wait, so I just placed my order via phone. Unfortunately, Saleen goes to the same school of shipping as Steeda; they can't tell me what the shipping cost is until it ships! Their lame excuse was that they don't know what carrier it'll end up with (UPS, Fed Ex, blah.. blah). They expect it to ship out Friday, so I guess I'll call back then to see what my total is. Steeda pulled the same crap when I ordered the Ultralites. I'm at their mercy, what to do...
Good new for you guys is that they have several in stock.
#1408
Shelby GT350 Member
Thread Starter
Join Date: January 17, 2006
Location: Tornado Alley
Posts: 2,061
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TacoBill
It's a race to the Saleen Short Throw Shifter!
#1410
Shelby GT350 Member
Thread Starter
Join Date: January 17, 2006
Location: Tornado Alley
Posts: 2,061
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 89Trooper
Bill's showin' off those stripes!
While I'm home sick as a dog... and on my weekend!! Geesh...
While I'm home sick as a dog... and on my weekend!! Geesh...
I feel for you.
#1411
Ha! I drove it lastnight to my monthly club drive-in so the stock shifting is fresh in my mind. Attached is a pic from one of the guys there, taken from his camera phone.
At the drive-in lastnight, a columnist from Motor Trend was there with his 05 or 06 GT. He had it completely striped of its paint and had it shot in Highland Green! Sorry, no pics. But, I think it's in one the recent issues of Motor Trend.
Shaker is due in today. I'm ready.
Hope you feel better Tom.
At the drive-in lastnight, a columnist from Motor Trend was there with his 05 or 06 GT. He had it completely striped of its paint and had it shot in Highland Green! Sorry, no pics. But, I think it's in one the recent issues of Motor Trend.
Shaker is due in today. I'm ready.
Hope you feel better Tom.
#1412
Rivet question (for the Shaker trim rings)...
Was this easy to do? Rivet holes from the inner and outer trim rings line up perfectly?
Was this easy to do? Rivet holes from the inner and outer trim rings line up perfectly?
#1414
Shelby GT350 Member
Thread Starter
Join Date: January 17, 2006
Location: Tornado Alley
Posts: 2,061
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TacoBill
Rivet question (for the Shaker trim rings)...
Was this easy to do? Rivet holes from the inner and outer trim rings line up perfectly?
Was this easy to do? Rivet holes from the inner and outer trim rings line up perfectly?
#1416
Originally Posted by swwake
oh my goodness. you never cease to amaze me.
#1417
Daryl- I tried to heat up that rear section lip below the license plate in attempt to close the small vinyl gap right at the corners.
Attempt backfired at me!
There must have been some moisture in the corner crevices because larger bubbles started to suddenly appear! I tried to move them into and out of the corners, but some still remain. I should've not messed with it in hindsight.
I don't have the time to let the stripes 'bake' in the sun, as most of these pesky bubbles will probably lay down on their own. I may have to start popping them by pin.
How are your stripes doing?
Attempt backfired at me!
There must have been some moisture in the corner crevices because larger bubbles started to suddenly appear! I tried to move them into and out of the corners, but some still remain. I should've not messed with it in hindsight.
I don't have the time to let the stripes 'bake' in the sun, as most of these pesky bubbles will probably lay down on their own. I may have to start popping them by pin.
How are your stripes doing?
#1418
Shelby GT350 Member
Thread Starter
Join Date: January 17, 2006
Location: Tornado Alley
Posts: 2,061
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TacoBill
Daryl- I tried to heat up that rear section lip below the license plate in attempt to close the small vinyl gap right at the corners.
Attempt backfired at me!
There must have been some moisture in the corner crevices because larger bubbles started to suddenly appear! I tried to move them into and out of the corners, but some still remain. I should've not messed with it in hindsight.
I don't have the time to let the stripes 'bake' in the sun, as most of these pesky bubbles will probably lay down on their own. I may have to start popping them by pin.
How are your stripes doing?
Attempt backfired at me!
There must have been some moisture in the corner crevices because larger bubbles started to suddenly appear! I tried to move them into and out of the corners, but some still remain. I should've not messed with it in hindsight.
I don't have the time to let the stripes 'bake' in the sun, as most of these pesky bubbles will probably lay down on their own. I may have to start popping them by pin.
How are your stripes doing?
#1419
Wonder how these rocker panel stripes would look... opinions?
#1420
Shelby GT350 Member
Thread Starter
Join Date: January 17, 2006
Location: Tornado Alley
Posts: 2,061
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TacoBill
Wonder how these rocker panel stripes would look... opinions?
Just my Opinion though.