Bold Moves Mustang Club of Tulsa
3/22/07, 09:56 AM
#1581
I finally got the RA number for the XCal2. Will be sending it back today. Let the continued headache begin.
3/22/07, 10:04 AM
#1582
Thread Starter
Join Date: September 19, 2005
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
Not a prob Jeff... so we are doing the test and tune on the 30th?? Bob? Are you going?
Good news on the tuner... well, at least it's moving forward.
Good news on the tuner... well, at least it's moving forward.
3/22/07, 10:07 AM
#1583
It blows my mind that it took so long just to make a stupid phone call too get the number. The problem is that I have no idea how long it is going to take to get it back. I hope within a week or two. I hate not being able to adjust or change if I need to.
3/22/07, 10:09 AM
#1584
I assume we are all still on for the 30th for Test and Tune. I think it would be fun. Practice makes perfect anyway. I know I need to learn how to drive my car better on the track.
3/22/07, 12:50 PM
#1585
Hey, did you all see that Doug at Bamachips has a mobile dyno and welcomes group dynodays and is willing to travel to our area...Might be an idea for the future. Maybe he could custom tune us if necessary. Just a thought at any rate.
3/22/07, 02:18 PM
#1586
hey guys im from tulsa and saw some 4:10 gears for 200 shipped and i called car fx and they told me they woudn't even put them on for me. i would have to buy throught them and would be a grand...does ANYONE know who could/would put them on for me?!?! anything would help thanks
3/22/07, 02:57 PM
#1587
Chris We have a installer that will do the swap for 200 bucks. He is a Ford Master Technician and will do the swap at the dealership after hours. If your interested I can get you his info.
3/22/07, 02:59 PM
#1588
Chris, also you should hook up with the rest of us on the 30th at the track for a test and tune night. If your still interested in becoming part of the club? The install rate is sortov for club members so I guess if you go ahead then you'll need to swear an oath or somthing....... BTW you'll love the 410's
3/22/07, 03:00 PM
#1589
In the house taking a break and to stop the bleeding, take more muscle relaxers from the pulled muscles today and yesterday, re-taped the small right index finger I broke earlier and doubled up on the blood pressure meds,
After all the "it is easy" and "only took me 15 minutes" lies and bs from Paul and David about removing the cam covers I started. Have one off and the other half way,
Called the powder coating wizards and to let them know hopefully I could bring them in the morning and ask how long...... maybe by the end of the week, which to them is Saturday or there might be a chance to finish them earlier !!!!!
Made note to self about don't expect a lot of quality prep from them and never know when I will see the covers again,
Right now don't know if I will powder coat them and just hang with them and do a good prep job before I take them in, mail them to one of those powdercoaters mentioned on the web site, may paint but those plum trees have flower buds blowing all over the place, want something that will last and not worry about,
The TB keeps looking at me and saying I need a better finish, the MAF also wants a coat of something and that black tube ...well, its black and that just makes me go nuts.
I will deal with David and Paul later, when certain of my body parts start working again and the blood and bruise go away.
Any positive suggestions would be appreciated.
After all the "it is easy" and "only took me 15 minutes" lies and bs from Paul and David about removing the cam covers I started. Have one off and the other half way,
Called the powder coating wizards and to let them know hopefully I could bring them in the morning and ask how long...... maybe by the end of the week, which to them is Saturday or there might be a chance to finish them earlier !!!!!
Made note to self about don't expect a lot of quality prep from them and never know when I will see the covers again,
Right now don't know if I will powder coat them and just hang with them and do a good prep job before I take them in, mail them to one of those powdercoaters mentioned on the web site, may paint but those plum trees have flower buds blowing all over the place, want something that will last and not worry about,
The TB keeps looking at me and saying I need a better finish, the MAF also wants a coat of something and that black tube ...well, its black and that just makes me go nuts.
I will deal with David and Paul later, when certain of my body parts start working again and the blood and bruise go away.
Any positive suggestions would be appreciated.
3/22/07, 03:04 PM
#1590
Hate to be a post hog but I also got the TRI-AX today !!! yipppeeee
The thing is freakin sweet! I will be performing the install this evening.
The thing is freakin sweet! I will be performing the install this evening.
3/22/07, 03:07 PM
#1591
Zesy you need to get your gears and run like the wind to a Ford dealership, this is not a job for Billy and Johnny to do on the driveway.
3/22/07, 03:09 PM
#1592
In the house taking a break and to stop the bleeding, take more muscle relaxers from the pulled muscles today and yesterday, re-taped the small right index finger I broke earlier and doubled up on the blood pressure meds,
After all the "it is easy" and "only took me 15 minutes" lies and bs from Paul and David about removing the cam covers I started. Have one off and the other half way,
Called the powder coating wizards and to let them know hopefully I could bring them in the morning and ask how long...... maybe by the end of the week, which to them is Saturday or there might be a chance to finish them earlier !!!!!
Made note to self about don't expect a lot of quality prep from them and never know when I will see the covers again,
Right now don't know if I will powder coat them and just hang with them and do a good prep job before I take them in, mail them to one of those powdercoaters mentioned on the web site, may paint but those plum trees have flower buds blowing all over the place, want something that will last and not worry about,
The TB keeps looking at me and saying I need a better finish, the MAF also wants a coat of something and that black tube ...well, its black and that just makes me go nuts.
I will deal with David and Paul later, when certain of my body parts start working again and the blood and bruise go away.
Any positive suggestions would be appreciated.
After all the "it is easy" and "only took me 15 minutes" lies and bs from Paul and David about removing the cam covers I started. Have one off and the other half way,
Called the powder coating wizards and to let them know hopefully I could bring them in the morning and ask how long...... maybe by the end of the week, which to them is Saturday or there might be a chance to finish them earlier !!!!!
Made note to self about don't expect a lot of quality prep from them and never know when I will see the covers again,
Right now don't know if I will powder coat them and just hang with them and do a good prep job before I take them in, mail them to one of those powdercoaters mentioned on the web site, may paint but those plum trees have flower buds blowing all over the place, want something that will last and not worry about,
The TB keeps looking at me and saying I need a better finish, the MAF also wants a coat of something and that black tube ...well, its black and that just makes me go nuts.
I will deal with David and Paul later, when certain of my body parts start working again and the blood and bruise go away.
Any positive suggestions would be appreciated.
3/22/07, 03:17 PM
#1593
Oh David....you hit it on the head...... lol 
Take pictures and do a write up for the web site on the shifter,
Jeff I will find out some more info from Doug......sounds interesting but I think Kurtis could be as good,
Well, David recharged my batteries....am after that last cover.
Take pictures and do a write up for the web site on the shifter,
Jeff I will find out some more info from Doug......sounds interesting but I think Kurtis could be as good,
Well, David recharged my batteries....am after that last cover.
3/22/07, 03:19 PM
#1594
Good luck! and Happy Blinging
3/22/07, 03:50 PM
#1595
Thread Starter
Join Date: September 19, 2005
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
$1000... Geez. Zesy. Send me a not at the clubs email, I'll get you the info on our guy. If everything looks good, it should only cost you $450... That REAL Ford racing gears and professional install. Can't beat that.
3/22/07, 03:54 PM
#1596
Thread Starter
Join Date: September 19, 2005
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
I had my covers off in 15mins... Rookie! 
You've been working on this for 2 days now? What did you do, pull the engine first!? LOL!
You've been working on this for 2 days now? What did you do, pull the engine first!? LOL!
3/22/07, 04:13 PM
#1597
So how much do you guys hate the new 10 lines of signature thing!!
Paul I see that you have changed yours.
So T&T on the 30th be there or be bob
Paul I see that you have changed yours.
So T&T on the 30th be there or be bob
3/22/07, 04:16 PM
#1598
Bob you gotta check into this. Let us know how it fits after you order and install.
http://www.wmsracing.com/pgi-PRODUCT%20SPEC?WMS-SHB05M
http://www.wmsracing.com/pgi-PRODUCT%20SPEC?WMS-SHB05M
3/22/07, 04:52 PM
#1599
Kinda nice...
I bet David installs the new shifter, test drives it, takes photos, posts a how to on our web site, all by 7:00 pm
I bet David installs the new shifter, test drives it, takes photos, posts a how to on our web site, all by 7:00 pm
3/22/07, 05:15 PM
#1600
Wonder what the FX shop would charge me on the cam covers ?