What did you do with your Mustang today?
#6221
After yesterday's curb damage incident I needed a Mustang morale adjustment. Luckily these just arrived for the addition of some engine bay bling. I still awaiting a refinished plenum cover from another source which will be high gloss black with red accents, the reverse scheme of the coil covers. I hope it's as well done as the coil covers. Soon to arrive are billet TriBar caps for the rad, oil, and w/s washer as well as covers for the battery and brake resevoir.
#6222
Bullitt Member
Join Date: December 11, 2013
Location: Cherry Hill, NJ
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
After yesterday's curb damage incident I needed a Mustang morale adjustment. Luckily these just arrived for the addition of some engine bay bling.
I still awaiting a refinished plenum cover from another source which will be high gloss black with red accents, the reverse scheme of the coil covers. I hope it's as well done as the coil covers.
Soon to arrive are billet TriBar caps for the rad, oil, and w/s washer as well as covers for the battery and brake resevoir.
I still awaiting a refinished plenum cover from another source which will be high gloss black with red accents, the reverse scheme of the coil covers. I hope it's as well done as the coil covers.
Soon to arrive are billet TriBar caps for the rad, oil, and w/s washer as well as covers for the battery and brake resevoir.
#6223
Mach 1 Member
Yesterday I took Mistress Lauren to the 30th annual summer round up and American Iron show put on by the Mustang Car Club of New England.... I took second place for my vehicle class (stock 2005 to 2011). I was told I missed 1st place by fractions of a point.
Last edited by DaGonz; 7/21/14 at 02:38 PM.
#6225
Legacy TMS Member
Haven't done it yet, but today she's getting the 285/40/18's off my GF's Shelby, getting them installed on the front
Should be a much better tire for the upcoming autocross than the all-season Conti DWS's that I have on there now, which were plowing everywhere last time
A quick mock-up, just becuz
Should be a much better tire for the upcoming autocross than the all-season Conti DWS's that I have on there now, which were plowing everywhere last time
A quick mock-up, just becuz
#6226
Mach 1 Member
I have pics from the show and of the trophy... I just have to download them; it was a very busy weekend and week so far at the firehouse.. my tour of duty yesterday with a contractor hitting a high pressure gas line at a condo complex, filling the 3 occupied buildings and the one under construction with a concentration of natural gas that was within the 5 to 15% flammable range.. and it was at shift change... and rush hour (the complex is on US Route 20)... fun fun fun!
#6227
I Have No Life
Haven't done it yet, but today she's getting the 285/40/18's off my GF's Shelby, getting them installed on the front Should be a much better tire for the upcoming autocross than the all-season Conti DWS's that I have on there now, which were plowing everywhere last time A quick mock-up, just becuz
#6228
Legacy TMS Member
#6230
Legacy TMS Member
Lol ...
So, the first place I went to, wouldn't put them on worrying that they might rub and they didn't want the liability.
Second place said they'd have to drive the car after installing them, that being the only way to know if they'll rub or not.
Yeah, ok.
Told the guy I don't want anybody driving it, his reply was a rude "well maybe we shouldn't work on it" ... fkn really? I walked in asking for the owners that I've known for a long time, and that's how you talk to me?
I'm not done with that guy.
Then I went to my condo and worked on it a bit.
Currently at a 3rd shop, working with me so far.
Gonna mount/balance one, bring me out to show me how it fits, put the car down and turn the wheel and see if it hits anywhere.
If all good, second one gets done.
Hope I'm not gonna spend $60 for nothing.
So, the first place I went to, wouldn't put them on worrying that they might rub and they didn't want the liability.
Second place said they'd have to drive the car after installing them, that being the only way to know if they'll rub or not.
Yeah, ok.
Told the guy I don't want anybody driving it, his reply was a rude "well maybe we shouldn't work on it" ... fkn really? I walked in asking for the owners that I've known for a long time, and that's how you talk to me?
I'm not done with that guy.
Then I went to my condo and worked on it a bit.
Currently at a 3rd shop, working with me so far.
Gonna mount/balance one, bring me out to show me how it fits, put the car down and turn the wheel and see if it hits anywhere.
If all good, second one gets done.
Hope I'm not gonna spend $60 for nothing.
#6231
Legacy TMS Member
Looks like it's gonna be close, but I think it will work.
This is the clearance with the 275/40/18 tire:
And with the 285/40/18 :
This is the clearance with the 275/40/18 tire:
And with the 285/40/18 :
#6232
Roush Forum Stalker
Haven't done it yet, but today she's getting the 285/40/18's off my GF's Shelby, getting them installed on the front
Should be a much better tire for the upcoming autocross than the all-season Conti DWS's that I have on there now, which were plowing everywhere last time
A quick mock-up, just becuz
Should be a much better tire for the upcoming autocross than the all-season Conti DWS's that I have on there now, which were plowing everywhere last time
A quick mock-up, just becuz
#6233
I Have No Life
#6234
Legacy TMS Member
That pic above is still a 275 Continental
The clearance with the 285's:
And some regular pics with the 285's on:
#6236
Super Boss Lawman Member
Was getting awesome gas mileage...
Attachment 162424
But then a Prius pulled up behind me at the light. So I had to do this...
Attachment 162426
So my mileage dropped a bit...
Attachment 162425
Was totally worth it.
Attachment 162424
But then a Prius pulled up behind me at the light. So I had to do this...
Attachment 162426
So my mileage dropped a bit...
Attachment 162425
Was totally worth it.
#6237
I Have No Life
Darren... Remember our talk about worrying about scraping our splitters? Well... I was a bit proactive, so I used some tape and some plastidip and created a pseudo barrier for future accidental scrapes and possible rock chips. Can you tell it's on there? If not, then good! How it should be... Pic is of left and right side of my valence
Then I got carried away and detailed her at 10 pm tonight
Then I got carried away and detailed her at 10 pm tonight
#6238
Super Boss Lawman Member
Darren... Remember our talk about worrying about scraping our splitters? Well... I was a bit proactive, so I used some tape and some plastidip and created a pseudo barrier for future accidental scrapes and possible rock chips. Can you tell it's on there? If not, then good! How it should be... Pic is of left and right side of my valence
Then I got carried away and detailed her at 10 pm tonight
Then I got carried away and detailed her at 10 pm tonight
#6239
Legacy TMS Member
Just installed the new Ford Racing twin-65mm throttle body, running it for now off the twin-60 JDM tune, which they say is OK to do.
However, I can't push it much until I get a new tune for the new VMP fuel pump voltage booster
First start-up:
Was a little surprised to see this oil in the elbow ... guess I really need to think about a dual-catch-can set-up.
However, I can't push it much until I get a new tune for the new VMP fuel pump voltage booster
First start-up:
Was a little surprised to see this oil in the elbow ... guess I really need to think about a dual-catch-can set-up.