FromZto5

Very nice. I'm glad you got the bobs too vs the jlt. I'm looking to do my own hoses and fittings. Can you describe how the fittings go on the end of the hose? And how does that secure on the fitting on the bobs? Screw on?

GT50GO

I'm not a hose guy LOL so I bought it with the fittings on the catch can side already done by Bob's. For this Ultimate GT500 kit to work on the Roush setup the lower catch can fitting had to be removed (45 degree) for a straight connector.They left a generous amount of hose and I only had to cut it to length then use the shrink connectors on the engine side.

FromZto5

Ah that's what I meant... How did you secure the shrink connectors? I'm sure the hose ends were frayed right? And then did that just screw on to the pcv connector end?

GT50GO

Ah okay, once I measured the distance (a few times) I marked the hose where I wanted to cut then removed the catch can from the car and took the can and the two PCV valves inside and used a blow dryer on the heat shrink connectors. They key to having no frays is as per Bob's instructions you wrap a piece of electrical tape around the hose were you will be cutting. I used my razor knife with a new blade. You then remove the tape. Yes the hoses just push in to place on the PCV connectors (have to work on it but it's good that it's tight).
My hair dryer is not very powerful but it secured the shrink connectors on fairly good then after driving it for 10 or so miles the engine bay heat shrunk them up very firmly.

Gabe

Yup. The $2.50 "stubby mod"

Cut the antenna short and put a black rubber cap on it. Bought a small package of caps at the local Advance Auto for $2.50. Have a few spares in case this one dries up and cracks.

Radio reception's still good.

FromZto5

Gabe wtf... Did you literally cut the antenna? Lol. Modern day McGyver!

FromZto5

drove her then took a few pics. Here's 3. Rest is in "latest pics" thread in 10-14 section. The following few are my favorites from today; I call this first one the "storms-a-comin'" The 2nd pic I call "shades"

Mustang Mama

Put him in is new garage. He barely fits, but he fits. Moved in a little over a week ago. Husband finally got the garage cleaned up and unpacked.

shurtual86

that silver

Mustang Mama

Purty isn't it? I searched hi and low for a silver gt. Only one was available in all the land. Of the land of 13 dealers in my area and surrounding areas. I love it. Easy to keep clean, well looking clean. It gleams in the sun. Need shades to look at it.

shurtual86

I loved my silver sn95, even when it was dirty, it looked good. I saw a sliver 14' at dealership I drove by today

Gabe

Lol, yes. Yes I did. Got the idea from a member on S197forum I believe ...

Awesome pics, by the way ...

SpeedCostsMoney

I stopped by a cruise in!

FromZto5

Thanks gabe... I appreciate it.

Stage_3

Looks killer Burton!

Stage_3

Last's night's cruise.

FromZto5

Thanks Tony! I appreciate it. I haven't been able to cruise like you. Weather in midwest is iffy for last week or 2. In fact, we are under a tornado warning currently. I didn't even drive. Had wifey drop me off... lol

Stage_3

You're welcome bud.
Man, that sucks. Hopefully it clears up soon so you can cruise. We're supposed to get crappy weather for Wednesday to possibly Friday.
Take care man.

DarrenGT

picked up my painted spoiler and front end, so now my kitchen looks like a body shop lol
I'm going to try to install the spoiler by tuesday so i can get it striped at the same time as the hood. we shall see. we are entering a serious heat wave this week and my mom is visiting too. car duties + heat wave + mom = complicated week

Stage_3

Awesome.
Good luck with the install bud!