View Poll Results: Do you prefer us lobbing Potatoes or Grenades to take care of spammers?
Lob potatoes to just stun them
2
18.18%
Lob grenades and remove them from the TMS pool permanently
9
81.82%
Voters: 11. You may not vote on this poll
Mustangs Coast to Coast
11/7/09, 07:20 AM
Legacy TMS Member Pr
11/7/09, 08:06 AM
I will buy Jack Stands!!!
I'll never think of the Viper the same again
11/7/09, 11:31 AM
Post *****
Thread Starter
It's freakin' ridiculous that it's gonna take that long to get to Indiana. I shipped the strut tower brace to Florida the next day and it's supposed to arrive the same day as yours Cody. 
You must live in the sticks or something.
You must live in the sticks or something.
11/7/09, 01:02 PM
Join Date: December 5, 2006
Location: Trapped in Minnesota
Posts: 31,619
Likes: 0
Received 70 Likes
on
66 Posts
62*!! 
11/7/09, 01:18 PM
Join Date: December 5, 2006
Location: Trapped in Minnesota
Posts: 31,619
Likes: 0
Received 70 Likes
on
66 Posts
I'm thinking this would work nicely in the GT. I really don't need to amp my rear speakers. http://www.crutchfield.com/s_107PA25...-2.html?tp=115 75wrms from my alpine just doesn't seem like enough, and I could put that in the notch like I originally planned. 
11/7/09, 01:46 PM
Post *****
Thread Starter
That looks good Nathan. Good price.
I've decided to get (2) of these http://signature.crutchfield.com/s_2...-4.html?tp=115
And (1) of these for 7 http://signature.crutchfield.com/s_2...-4.html?tp=115
I'm gonna bridge the 4 channel to 2 channel with a 4 ohm load to each Perfect 10. That's 325xx2 rms
Then with the 2 smaller 4 channel amps I'm gonna send 60w rms to all my other channels separately.
2 tweeters
2 5.25 mids
2 8" woofers
2 5x7 rears
I'm gonna block everything below 90 to all the those speakers...and operate the tweeters at 4500, the mids at 250-4500, the rears at 90-20k, and the woofers t 90-250
I get really good imaging in my doors with the 3 way component setup.
Oh...and the f***ed up Alpine PDX1.1000 goes on the shelf in the closet, and I'm moving the PDX4.100 to the vert along with the PDX2.150 for a trunk sub.
The MRP-M1000 will go in the Bronco for some subs someday, and I'll add an MRP-F300 for teh 4 other channels. It's just 50wx4 but my Polk dbx's are only rated at like 55 or 60w rms anyway.
I've decided to get (2) of these http://signature.crutchfield.com/s_2...-4.html?tp=115
And (1) of these for 7 http://signature.crutchfield.com/s_2...-4.html?tp=115
I'm gonna bridge the 4 channel to 2 channel with a 4 ohm load to each Perfect 10. That's 325xx2 rms
Then with the 2 smaller 4 channel amps I'm gonna send 60w rms to all my other channels separately.
2 tweeters
2 5.25 mids
2 8" woofers
2 5x7 rears
I'm gonna block everything below 90 to all the those speakers...and operate the tweeters at 4500, the mids at 250-4500, the rears at 90-20k, and the woofers t 90-250
I get really good imaging in my doors with the 3 way component setup.
Oh...and the f***ed up Alpine PDX1.1000 goes on the shelf in the closet, and I'm moving the PDX4.100 to the vert along with the PDX2.150 for a trunk sub.
The MRP-M1000 will go in the Bronco for some subs someday, and I'll add an MRP-F300 for teh 4 other channels. It's just 50wx4 but my Polk dbx's are only rated at like 55 or 60w rms anyway.
Last edited by 2k7gtcs; 11/7/09 at 01:50 PM.
11/7/09, 01:54 PM
Post *****
Thread Starter
I'm thinking this would work nicely in the GT. I really don't need to amp my rear speakers. http://www.crutchfield.com/s_107PA25...-2.html?tp=115 75wrms from my alpine just doesn't seem like enough, and I could put that in the notch like I originally planned.
11/7/09, 06:16 PM
Join Date: December 5, 2006
Location: Trapped in Minnesota
Posts: 31,619
Likes: 0
Received 70 Likes
on
66 Posts
That looks good Nathan. Good price.
I've decided to get (2) of these http://signature.crutchfield.com/s_2...-4.html?tp=115
And (1) of these for 7 http://signature.crutchfield.com/s_2...-4.html?tp=115
I'm gonna bridge the 4 channel to 2 channel with a 4 ohm load to each Perfect 10. That's 325xx2 rms
Then with the 2 smaller 4 channel amps I'm gonna send 60w rms to all my other channels separately.
2 tweeters
2 5.25 mids
2 8" woofers
2 5x7 rears
I'm gonna block everything below 90 to all the those speakers...and operate the tweeters at 4500, the mids at 250-4500, the rears at 90-20k, and the woofers t 90-250
I get really good imaging in my doors with the 3 way component setup.
Oh...and the f***ed up Alpine PDX1.1000 goes on the shelf in the closet, and I'm moving the PDX4.100 to the vert along with the PDX2.150 for a trunk sub.
The MRP-M1000 will go in the Bronco for some subs someday, and I'll add an MRP-F300 for teh 4 other channels. It's just 50wx4 but my Polk dbx's are only rated at like 55 or 60w rms anyway.
I've decided to get (2) of these http://signature.crutchfield.com/s_2...-4.html?tp=115
And (1) of these for 7 http://signature.crutchfield.com/s_2...-4.html?tp=115
I'm gonna bridge the 4 channel to 2 channel with a 4 ohm load to each Perfect 10. That's 325xx2 rms
Then with the 2 smaller 4 channel amps I'm gonna send 60w rms to all my other channels separately.
2 tweeters
2 5.25 mids
2 8" woofers
2 5x7 rears
I'm gonna block everything below 90 to all the those speakers...and operate the tweeters at 4500, the mids at 250-4500, the rears at 90-20k, and the woofers t 90-250
I get really good imaging in my doors with the 3 way component setup.
Oh...and the f***ed up Alpine PDX1.1000 goes on the shelf in the closet, and I'm moving the PDX4.100 to the vert along with the PDX2.150 for a trunk sub.
The MRP-M1000 will go in the Bronco for some subs someday, and I'll add an MRP-F300 for teh 4 other channels. It's just 50wx4 but my Polk dbx's are only rated at like 55 or 60w rms anyway.
No, that's a pretty rare option. I've only ever seen it on the kappa subs.
11/7/09, 06:19 PM
Post *****
Thread Starter
I took some pics of the convent we're building today. All the exterior walls are up. They a 6" reinforced concrete with 2.5" of styrofoam inside and outside. I'm loading pics.
Gary, is there any chance that you are going?
11/7/09, 06:24 PM
Post *****
Thread Starter
Nope. What is NMRA? I'm not doing any racing till i get my relo brackets welded. I"m afraid I'm gonna twist one off. Especially if my traction ever hooked up.
11/7/09, 06:33 PM
Post *****
Thread Starter
Front
Right side
Inside what will be the meeting room
Inside the meeting room looking back at the main building
The bedroom wing, this space will have 8 bedrooms
Looking into the kitchen, dining, great room area
Right side
Back
Right side
Inside what will be the meeting room
Inside the meeting room looking back at the main building
The bedroom wing, this space will have 8 bedrooms
Looking into the kitchen, dining, great room area
Right side
Back
11/7/09, 06:41 PM
Join Date: December 5, 2006
Location: Trapped in Minnesota
Posts: 31,619
Likes: 0
Received 70 Likes
on
66 Posts
11/7/09, 08:08 PM
The Legacy TMS Lady
+1