BOSS parts in the 2011 FRP catalog
I picked the splitter up for $120 from www.newfordparts.com
GTR Member
Joined: September 28, 2009
Posts: 6,284
Likes: 1
CR3Z-17626-AC. You have to search for it instead of going through the drill down menus.
I started a thread specific to it here:
https://themustangsource.com/f802/or...-today-491131/
I started a thread specific to it here:
https://themustangsource.com/f802/or...-today-491131/
You Rock, thanks so much!
Sounds Good!
Cobra R Member
Joined: December 3, 2010
Posts: 1,851
Likes: 3
I picked the splitter up for $120 from www.newfordparts.com
Last edited by 2012YellowBoss; Jan 26, 2011 at 08:34 PM.
GT Member
Joined: November 24, 2010
Posts: 166
Likes: 0
From: Detroit Area
Street Boss 302 Intake
This isn't from the FRPP catalog, but I saw this today about the Street Boss 302 Intake being made available.
http://www.mustangevolution.com/201101266567/
You would think they would remove the Boss 302 ID from it.
http://www.mustangevolution.com/201101266567/
You would think they would remove the Boss 302 ID from it.
Steve, thanks to you I went in and we looked up the parts for that number and the whole Boss front end came up! Got the grill, tri bar pony and splitter!! Thanks so much! It was very easy once those part numbers were available...
GTR Member
Joined: September 28, 2009
Posts: 6,284
Likes: 1
Originally Posted by jacostang
Steve, thanks to you I went in and we looked up the parts for that number and the whole Boss front end came up! Got the grill, tri bar pony and splitter!! Thanks so much! It was very easy once those part numbers were available...
Ok here is the Boss Grill and Running Pony, the part for the pony states "insert"
Grill CR3Z-8200-BAPTM $374.92 Retail, my cost was $281.19
Pony 8R3Z-16228-A $69.28 Retail, My cost was $53.71
He said he could knock another $25 off when I bought them together.
Grill CR3Z-8200-BAPTM $374.92 Retail, my cost was $281.19
Pony 8R3Z-16228-A $69.28 Retail, My cost was $53.71
He said he could knock another $25 off when I bought them together.
GTR Member
Joined: September 28, 2009
Posts: 6,284
Likes: 1
Post pics of your setup once you get it on. Should complete the look real nice on your pace car.
EDIT - One other part that I'm looking for a part number on is the blue coil covers. BOI has them for $125, but we might be able to find them cheaper through a parts vendor.
Last edited by Overboost; Jan 29, 2011 at 02:58 PM.
Oh I know but I really want mine to look like the original Pace Car, soooo Gonna have to bite the bullet on this one...
Last edited by jacostang; Jan 29, 2011 at 06:19 PM.
GTR Member
Joined: September 28, 2009
Posts: 6,284
Likes: 1
I did some hunting, and found the part number base for the coil covers. If I had to guess, the part would be something like CR3Z-6P068-??. There are four listed, two are $36 and the other two are $52.
Thread Starter
FR500 Member
Joined: July 1, 2008
Posts: 3,352
Likes: 0
From: Oxford, UK
Added to the list. Thanks!
Thread Starter
FR500 Member
Joined: July 1, 2008
Posts: 3,352
Likes: 0
From: Oxford, UK
Tasca Super Boss 429 Member
Joined: December 18, 2010
Posts: 3,708
Likes: 0
From: NorCal
The gauge and LS splitter links are now active. The gauge pod is even more than I expected at $1,399. Yikes.
http://www.fordracingparts.com/parts...KeyField=12414
http://www.fordracingparts.com/parts...KeyField=12414
Yikes is right! Holy cow!
Thread Starter
FR500 Member
Joined: July 1, 2008
Posts: 3,352
Likes: 0
From: Oxford, UK
