5.0 Badges and "GT" trunk medallion
#21
Bullitt Member
Join Date: April 14, 2012
Location: SoCal
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
heat gun and non mar tool should do it.
Oops!! should have read the rest of the thread
Last edited by Shifterboy45; 5/6/12 at 02:24 PM.
#23
Thanks for the advise guys. Got the 5.0 off, and the PBF on. Got the 5.0 off under 3 minutes, with fishing string. The left over adhesive was another story.. 1 1/2, to 2 hrs each side..
#24
All emblems are interchangeable. There is no way Ford would produce different fenders or decklid panels for each specific model. Every car leaves the body shop looking the same (hoods aside). The holes that locate the emblems are quite large and would need a good amount of body work to fill them in and sand smooth.
Back in the 70s it was not uncommon to have optional trim that required holes in fenders, door panels, and quarter panels.
#27
I Have No Life
#28
Cobra Member
I'm really happy with the end result. Although when having my car washed the other day a 20ish kid asked me, What is a 302??? Is that some new engine??? That said, nice kid and great wash job.
#31
The Faux gas cap is the ugliest thing about our cars IMO. I've always disliked it and hope to somehow get the bling off. The gt only without the big goofy chrome ring would look much better.
#34
Cobra R Member
Join Date: June 24, 2011
Location: Long Island
Posts: 1,568
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Mustang Mafia
The Faux gas cap is the ugliest thing about our cars IMO. I've always disliked it and hope to somehow get the bling off. The gt only without the big goofy chrome ring would look much better.
#35
Originally Posted by 2012GTCS
I plan to get mine off somehow and pastidip it. Guys have done it an it looks great. Goes great with the flat black trim and black out panel
#37
Cobra R Member
Join Date: June 24, 2011
Location: Long Island
Posts: 1,568
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by nj 5.0
I didn't take mine off when I sprayed it. Just cover everything around it.
#38
Cobra R Member
Join Date: June 24, 2011
Location: Long Island
Posts: 1,568
Likes: 0
Received 0 Likes
on
0 Posts
I did the plasti dip on the car and I didnt like it. It came out too much like a Truck Bed liner. Very coarse and rough, even to the eye. Dirt stuck to it like crazy. And when i took the tape off i messed up some of the edges.
I notice some guys dont tape right up to the edge. They actuall ylet the plasti dip get on the car around the faux cap slightly. Then maybe trim with a razor?
I notice some guys dont tape right up to the edge. They actuall ylet the plasti dip get on the car around the faux cap slightly. Then maybe trim with a razor?
Thread
Thread Starter
Forum
Replies
Last Post