Performance And Tech
#1101
It's gonna be tough to find a good one for under 200? What year is the car, motor and so forth?
#1102
1999 mustang cobra 4.6 DOHC
#1103
He's keeping hte motor stock and not planning on modding it right? Then a stocker will work just fine.
#1104
#1105
Well then, green strawberry, fuzzy nails, slippery sandpaper big little pain in the Paul.
#1106
That's awesome! Stock bottom end should work....
#1107
It would have to be set up and tuned with a dynapack to get it's full rated hp.
#1108
Hey,wish i could have been there to.I knew you needed the rca y connector.The last 3 i installed came with the kit.So who gets the valve covers next.CHOP CHOP.Jarrod if you don't make a move soon I'll get them and you'll loose like you did on the wheels.
#1109
No action,so iam going to bed.See you tomorrow.No really i'm going to bed.
#1110
TOny you can use the rotational set if you want. Just make sure we get the old ones back into rotation when you are finished
#1111
Yep. BTW... Who has the "rotation set" ?
#1112
I believe david
#1113
Taco Bill found a cheap solution for our leaky brake resevoirs
http://forums.bradbarnett.net/showpo...8&postcount=11
http://forums.bradbarnett.net/showpo...8&postcount=11
#1114
Bring them sat to the dyno and i'll check them out.I will get them powder coated and when we have a tech day you can have mine.If there a pain in the a$$ to change i can keep whats on there.
#1115
I think some of them are leaking at the bottom.I just pulled some fluid out of mine and it seems ok.Lower the level a little bit.
#1116
Valve covers are cheesecake to swap. No sweat Tony.
#1117
Me like CHEESECAKE.I think they have one named after Brett,FUDGE CHEESECAKE
#1118
He is a Fudge Packer so that makes sense
#1119
Hey paul
#1120
I'm not doing another mindless pi$$ing contest...