Body Work
#462
saw a few of these on cars.com
http://www.cars.com/go/search/detail...5&aff=national
http://www.cars.com/go/search/detail...5&aff=national
http://www.cars.com/go/search/detail...5&aff=national
http://www.cars.com/go/search/detail...5&aff=national
http://www.cars.com/go/search/detail...5&aff=national
http://www.cars.com/go/search/detail...5&aff=national
i went up to 500 miles as that is the distance i would be willing to get the right deal on the right car.
http://www.cars.com/go/search/detail...5&aff=national
http://www.cars.com/go/search/detail...5&aff=national
http://www.cars.com/go/search/detail...5&aff=national
http://www.cars.com/go/search/detail...5&aff=national
http://www.cars.com/go/search/detail...5&aff=national
http://www.cars.com/go/search/detail...5&aff=national
i went up to 500 miles as that is the distance i would be willing to get the right deal on the right car.
#465
Bullitt Member
Join Date: February 24, 2007
Location: Harvest, AL
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
#466
Super Boss Lawman Member
Thread Starter
#467
Super Boss Lawman Member
Thread Starter
Also if the starter is starting to go bad does it start to stick? It doesn't always do it, but recently its started to occasionally give the grinding noise when I first try to start it.
#468
#469
That doesn't sound like sticking, that sounds like it's not fully engaged. Either your flexplate is damaged, the starter is damaged, or it needs to be shimmed. Pull the starter and look at the gear teeth.
#470
Mberglo's right. If you let it go too long, it can actually wear out teeth on the flywheel so that the starter will no longer engage at certain points. At this point, you'd have to drive around with the bellhousing inspection plate off and carry a really long screwdriver or crow bar to manually rotate the flywheel (and engine) a few degrees to where the starter can mesh with good teeth. Ask me how I know this...
#473
Super Boss Lawman Member
Thread Starter
Getting stuff ready, still have yet to paint though. Hopefully get that done thursday before class. Printed off a mod list of things done to the coupe and also went and bought a for sale sign.
#474
Super Boss Lawman Member
Thread Starter
#476
Super Boss Lawman Member
Thread Starter
Should find out later this week if they are going to buy it or not. They really liked it when I showed them it today.
The car that will replace it right now looks to be a 03 350Z.
The car that will replace it right now looks to be a 03 350Z.
Last edited by BA Mustang; 10/11/10 at 10:48 PM.
#478
Cobra Member
#479
Super Boss Lawman Member
Thread Starter
I did spend a $170 on it that should have fixed it, but what was done didn't work. I've just driven it with the problem still til now. I'm fixing it before the people buy the car from me.
I actually have 2 3 speeds sitting out in our little storage house, but I don't have a driveshaft that will fit them.
I actually have 2 3 speeds sitting out in our little storage house, but I don't have a driveshaft that will fit them.
#480
Super Boss Lawman Member
Thread Starter
Can anyone tell me the difference in a 3 speed yoke and a 5 speed/C4 yoke?
EDIT: Never mind found they are the same.
EDIT: Never mind found they are the same.
Last edited by BA Mustang; 10/18/10 at 08:58 PM.