What did you do to your '10-'14 today?
#3442
Member
No, I had a long list so I went with the srt.t's, a little cheaper and that savings covered the adj. panhard bar.
Last edited by Camdad12; 5/20/16 at 10:23 AM. Reason: Misspell
#3443
I Have No Life
Yes sir! They were by far the favorite mod that I have ever done to the car. It will sound loud as ****, you might have to go and find the plates that came in the Boss 302's with the hole in the middle.
I'm thinking of grebbing the Kooks mufflers as well with mine since I think it will be stupid loud haha.
Very cool! Did you have a fun time driving in a parking lot with cones in 3rd gear the whole time
Looks like a it was a great event with a little bit of everything for everyone.
I'm thinking of grebbing the Kooks mufflers as well with mine since I think it will be stupid loud haha.
Very cool! Did you have a fun time driving in a parking lot with cones in 3rd gear the whole time
Looks like a it was a great event with a little bit of everything for everyone.
Sorry for the delay in the pics and vids and review. Will finalize it this weekend I hope.
#3445
I Have No Life
Ok... exhaust setup is complete. I just sat at the shop over lunch while they fabbed up the restrictor plates and put it in.
Omg... NOW my Kooks set up is done. She's perrrrrrrfect. We went with a 3/8" opening. That's the right amount. Growl from the sides, proper breathing front to back - headers to Corsas. It just sounds completely bad a**. Pics and vids this weekend I hope.
Omg... NOW my Kooks set up is done. She's perrrrrrrfect. We went with a 3/8" opening. That's the right amount. Growl from the sides, proper breathing front to back - headers to Corsas. It just sounds completely bad a**. Pics and vids this weekend I hope.
#3446
Roush Forum Stalker
Ok... exhaust setup is complete. I just sat at the shop over lunch while they fabbed up the restrictor plates and put it in.
Omg... NOW my Kooks set up is done. She's perrrrrrrfect. We went with a 3/8" opening. That's the right amount. Growl from the sides, proper breathing front to back - headers to Corsas. It just sounds completely bad a**. Pics and vids this weekend I hope.
Omg... NOW my Kooks set up is done. She's perrrrrrrfect. We went with a 3/8" opening. That's the right amount. Growl from the sides, proper breathing front to back - headers to Corsas. It just sounds completely bad a**. Pics and vids this weekend I hope.
#3449
Sound had me like.... LOL.
Unreal man.
Whats next? Driveshaft? I had one on my 2011, didnt notice much of a difference but every-time i see the stock one it just makes me question getting one for my 2014
Unreal man.
Whats next? Driveshaft? I had one on my 2011, didnt notice much of a difference but every-time i see the stock one it just makes me question getting one for my 2014
#3450
Super Boss Lawman Member
sounds good Burton. I bet the fella approaching from the side street was like OMG! is he gonna stop??? LOL
I can see myself considering a similar setup some day. I have enough clearance in front of the rears to hold those side pipes nicely.
I can see myself considering a similar setup some day. I have enough clearance in front of the rears to hold those side pipes nicely.
#3451
THE RED FLASH ------Moderator
Btw: I don't remember asking before, but are Niche Milan wheels 20x10's both front and rear or just the fronts and what's your tire size ?
Thanks, Rocky
#3452
I Have No Life
Originally Posted by xtc.inc
Sound had me like.... LOL.
Unreal man.
Whats next? Driveshaft? I had one on my 2011, didnt notice much of a difference but every-time i see the stock one it just makes me question getting one for my 2014
Unreal man.
Whats next? Driveshaft? I had one on my 2011, didnt notice much of a difference but every-time i see the stock one it just makes me question getting one for my 2014
As for driveshaft, yeah the stock one is an eyesore eh? . But I don't plan on tracking mine so maybe it's ok? Oh well. That street video is the most she'll see LOL
Originally Posted by DarrenGT
sounds good Burton. I bet the fella approaching from the side street was like OMG! is he gonna stop??? LOL
I can see myself considering a similar setup some day. I have enough clearance in front of the rears to hold those side pipes nicely.
I can see myself considering a similar setup some day. I have enough clearance in front of the rears to hold those side pipes nicely.
Originally Posted by m05fastbackGT
Burton, I definitely like the tone much better with the resonators.. They provide a deeper more refined sound IMO..
Btw: I don't remember asking before, but are Niche Milan wheels 20x10's both front and rear or just the fronts and what's your tire size ?
Thanks, Rocky
Btw: I don't remember asking before, but are Niche Milan wheels 20x10's both front and rear or just the fronts and what's your tire size ?
Thanks, Rocky
And as to your resonator comment, I'm confused. I have no resonators, been that way for years
Last edited by FromZto5; 5/22/16 at 01:00 PM.
#3453
Roush Forum Stalker
#3454
Drove from Long Island to Syracuse, 800 miles round trip. The car performed flawlessly. The new springs made the trip much more comfortable. The new tires in front never slipped on turns. Alignment was spot on, averaged 80 plus miles an hour. What a real treat. The only problem, didn't see too many mustangs, my car was lonely. Saw a sweet GTHIG going north on 17 and I blew by a Ruby Red 2015. The top was down on the ride up but we kept it up on the ride down.
:head spin:
:head spin:
Last edited by MadcapMagician; 5/22/16 at 02:32 PM.
#3455
I Have No Life
#3456
Cobra Member
Looks and sounds great Burton!
I finally got to do my oil change and chin spoiler mod yesterday! I screwed up my ankle last weekend and it's still messed up, so I just had to go slow and get it done... I ordered race ramps this last week and they got here on Thursday, just in time for my project! Overall, I am loving the look of the spoiler! I have to make sure to come of my driveway at an angle, so I don't scrape, but it looks much better than stock...
I finally got to do my oil change and chin spoiler mod yesterday! I screwed up my ankle last weekend and it's still messed up, so I just had to go slow and get it done... I ordered race ramps this last week and they got here on Thursday, just in time for my project! Overall, I am loving the look of the spoiler! I have to make sure to come of my driveway at an angle, so I don't scrape, but it looks much better than stock...
#3457
I Have No Life
Originally Posted by Iceknyght
Looks and sounds great Burton!
I finally got to do my oil change and chin spoiler mod yesterday! I screwed up my ankle last weekend and it's still messed up, so I just had to go slow and get it done... I ordered race ramps this last week and they got here on Thursday, just in time for my project! Overall, I am loving the look of the spoiler! I have to make sure to come of my driveway at an angle, so I don't scrape, but it looks much better than stock...
I finally got to do my oil change and chin spoiler mod yesterday! I screwed up my ankle last weekend and it's still messed up, so I just had to go slow and get it done... I ordered race ramps this last week and they got here on Thursday, just in time for my project! Overall, I am loving the look of the spoiler! I have to make sure to come of my driveway at an angle, so I don't scrape, but it looks much better than stock...
#3458
Cobra Member
They are a bit on the expensive side, but man did they work better than any other ramps I have used! They are made of a material that is similar to spray-on truck bed stuff (very grippy) and is that way all over, so I didn't have to worry about scooting the ramps at all (which was the problem I have had on all my other ones). Drove right up with no problems! And the have a pretty decent sized lip at the end, so I can't imagine going over (or if you did, it would take some effort, LOL).
The ones I got are 2-piece and the back half can come off once I am on there so I can still access the side of the car as well. They are the 8" height and worked great for me (I am not lowered, and they do make a 10" height one). They also make extenders that level out the angle, so if you're super low, you can still use them. I didn't need them, but for people that are pretty low, it's a nice option...
Overall, I like them! I would love them if they were cheaper, but heck, these should be the last ones I need to buy, so that's a plus!
#3459
Join Date: December 5, 2006
Location: Trapped in Minnesota
Posts: 31,619
Likes: 0
Received 70 Likes
on
66 Posts
Looks and sounds great Burton!
I finally got to do my oil change and chin spoiler mod yesterday! I screwed up my ankle last weekend and it's still messed up, so I just had to go slow and get it done... I ordered race ramps this last week and they got here on Thursday, just in time for my project! Overall, I am loving the look of the spoiler! I have to make sure to come of my driveway at an angle, so I don't scrape, but it looks much better than stock...
[IMG]https://cimg0.ibsrv.net/gimg/themustangsource.com-vbulletin/1024x768/80-b514b0a7_f125_44e8_afd0_fc5dcea25c63_zpspjidjdhk_3 92fe4f3bb9140b8370a7c622e61c2cb58eae1c1.jpg[/IM]
[IMG]https://cimg2.ibsrv.net/gimg/themustangsource.com-vbulletin/1024x768/80-b0750798_b364_4f00_8a61_cf3cee23a1bf_zpsgll3msqe_0 4c35cb8924ffefe939518c720fc670bd84ba99e.jpg[/IM]
[IMG]https://cimg4.ibsrv.net/gimg/themustangsource.com-vbulletin/1024x768/80-aa15fc00_2a9c_4cfe_bf12_49f0353cff1c_zpsmvdobvwh_3 35cd83b8be9db840bfa35cf6921440c3ce39171.jpg[/IM]
I finally got to do my oil change and chin spoiler mod yesterday! I screwed up my ankle last weekend and it's still messed up, so I just had to go slow and get it done... I ordered race ramps this last week and they got here on Thursday, just in time for my project! Overall, I am loving the look of the spoiler! I have to make sure to come of my driveway at an angle, so I don't scrape, but it looks much better than stock...
[IMG]https://cimg0.ibsrv.net/gimg/themustangsource.com-vbulletin/1024x768/80-b514b0a7_f125_44e8_afd0_fc5dcea25c63_zpspjidjdhk_3 92fe4f3bb9140b8370a7c622e61c2cb58eae1c1.jpg[/IM]
[IMG]https://cimg2.ibsrv.net/gimg/themustangsource.com-vbulletin/1024x768/80-b0750798_b364_4f00_8a61_cf3cee23a1bf_zpsgll3msqe_0 4c35cb8924ffefe939518c720fc670bd84ba99e.jpg[/IM]
[IMG]https://cimg4.ibsrv.net/gimg/themustangsource.com-vbulletin/1024x768/80-aa15fc00_2a9c_4cfe_bf12_49f0353cff1c_zpsmvdobvwh_3 35cd83b8be9db840bfa35cf6921440c3ce39171.jpg[/IM]
#3460
Roush Forum Stalker