Trufiber Gts2
1/1/08 | 06:23 PM
#482
Bullitt Member
Joined: November 9, 2006
Posts: 266
Likes: 0
Hardcore Mustang Dream Build pictures
Check out this link. Hardcore Mustang Dream Build pictures
http://mynetimages.com/album/Horrifi...amBuild/?pg=27
http://mynetimages.com/album/Horrifi...amBuild/?pg=27
1/2/08 | 11:16 PM
#483
TMS West Coast Correspondent
Joined: October 14, 2004
Posts: 3,581
Likes: 0
Well, it's Xmas Eve so I thought I'd bump this thread and wish all of you a happy holiday. At the same time I thought I'd post pics of my GTS-2 hood. Regarding hood shake, I guess I'm one of the lucky people with any third party hood (or stock hood for that matter) because I haven't experienced any shake up to 110 mph. If you notice on the closeups, I had a couple of mods done. I especially like the turn signal lights/flasher embedded on the backside. Looks really slick at night.
Anyway, happy holidays to all!
---John
Anyway, happy holidays to all!
---John
1/3/08 | 05:50 AM
#484
Cobra Member
Joined: November 11, 2006
Posts: 1,329
Likes: 0
Check out this link. Hardcore Mustang Dream Build pictures
http://mynetimages.com/album/Horrifi...amBuild/?pg=27
http://mynetimages.com/album/Horrifi...amBuild/?pg=27
its pretty cool. however, i feel the cervini kit is overkill. i like the ronaele kits better. it has better lines and more subtle.
thanks for sharing this 5150!
1/3/08 | 09:15 PM
#485
Shelby GT350 Member
Joined: April 9, 2007
Posts: 2,463
Likes: 0
From: Ellenton, FL
Your pictures?!
1/4/08 | 03:55 AM
#486
Bullitt Member
Joined: April 1, 2007
Posts: 238
Likes: 1
From: Eugene, OR
1/4/08 | 06:34 AM
#487
Cobra Member
Joined: November 11, 2006
Posts: 1,329
Likes: 0
1/14/08 | 02:29 AM
#489
Bullitt Member
Joined: January 22, 2006
Posts: 213
Likes: 0
looks great 
Looks great. You also did something different with the heat extractor vents correct? That outer lip? Looks good. Turn signals were a nice touch. I still haven't done anything about the washer nozzle thing. I may look into that on my next day off. My hood only shakes when its pretty windy outside. On a normal calm day no hood shake on the highway doing 80 or anything. Add some wind and it'll dance some.
And finally here are some pictures of my finished hood.
And finally here are some pictures of my finished hood.
1/14/08 | 06:38 PM
#491
GTR Member
Joined: April 20, 2005
Posts: 4,661
Likes: 1
From: Tampa,FL
so I drive a freakin hour in **** rush hour traffic on a Fri afternoon(11th) to get my hood painted. When I show up the wife of the painter tells me he went to the emergency room earlier because he had shingles right by the corner of his eye. The hood was supposed to be completed on the 18th. I found out today it will not be done until the 25th.
I feel bad for the guy but this is the kind of luck I've had my whole freakin life
Thanks for letting me vent
I feel bad for the guy but this is the kind of luck I've had my whole freakin life Thanks for letting me vent
1/14/08 | 09:43 PM
#492
Shelby GT350 Member
Joined: April 9, 2007
Posts: 2,463
Likes: 0
From: Ellenton, FL
so I drive a freakin hour in **** rush hour traffic on a Fri afternoon(11th) to get my hood painted. When I show up the wife of the painter tells me he went to the emergency room earlier because he had shingles right by the corner of his eye. The hood was supposed to be completed on the 18th. I found out today it will not be done until the 25th. I feel bad for the guy but this is the kind of luck I've had my whole freakin life Thanks for letting me vent
I feel bad for the guy but this is the kind of luck I've had my whole freakin life Thanks for letting me ventWow dude that sucks. And your driving around with the hood in raw form right? White... Sucks
1/15/08 | 08:13 PM
#493
GTR Member
Joined: April 20, 2005
Posts: 4,661
Likes: 1
From: Tampa,FL
1/31/08 | 11:38 AM
#497
Legacy TMS Member
Joined: October 12, 2006
Posts: 479
Likes: 3
From: Merritt Island, FL
Well gang it looks like TruFiber has been following the discussions on their GTS hoods in the forums. Here is a link to another forum where the GTS-3 hood is discussed. From the photos it's the same as the GTS-2 but the rear intake area is curved to match the rear edge of the hood. It also looks to have a less pronounced center ridge. I wouldn't be surprised to see this one replace the GTS-2. Now I have no excuse for not getting this hood.
http://www.mustangforums.com/m_45441...tm.htm#4544142
BB
Semper Fi
http://www.mustangforums.com/m_45441...tm.htm#4544142
B
BSemper Fi
1/31/08 | 02:10 PM
#498
Shelby GT350 Member
Joined: April 9, 2007
Posts: 2,463
Likes: 0
From: Ellenton, FL
Well gang it looks like TruFiber has been following the discussions on their GTS hoods in the forums. Here is a link to another forum where the GTS-3 hood is discussed. From the photos it's the same as the GTS-2 but the rear intake area is curved to match the rear edge of the hood. It also looks to have a less pronounced center ridge. I wouldn't be surprised to see this one replace the GTS-2. Now I have no excuse for not getting this hood.
http://www.mustangforums.com/m_45441...tm.htm#4544142
BB
Semper Fi
http://www.mustangforums.com/m_45441...tm.htm#4544142
B
BSemper Fi
2/5/08 | 11:34 PM
#499
Member
Joined: September 19, 2007
Posts: 49
Likes: 0
From: Highland, CA
It is however, identical to Ronaele.