Street Scene center fog light grille review
#201
Originally Posted by JST4FN
Thats why I listed I had to notch my latch mount. It wanted to push the fog light out the wrong direction or if you pushed it under the latch mount it wanted to push on the plug and over time I felt it would crack. I notched it and no worries either way now
#202
Originally Posted by MTAS
As an admitted simpleton, I'm gonna need a quick pic of that
Both my bulb sockets point to the (left) passenger side is that the only way they go?
#203
When I get home I'll pull the top peice off and see if I can get a clear shot of what I did. It may clear if you push the light all the way down when tightening them up, but it still will rub. I say dremel that baby and be done
#204
Originally Posted by Irish1028
Gents,
Where is the best place to get a tri-bar pony logo to fit nicely on this grille? It seems as if some people have figured out the best approach. There seem to be some many sizes and types. Any help would be much appreciated.
Cheers!!!
Irish
Where is the best place to get a tri-bar pony logo to fit nicely on this grille? It seems as if some people have figured out the best approach. There seem to be some many sizes and types. Any help would be much appreciated.
Cheers!!!
Irish
The only one I would recomend NOT getting is the current pony that comes with the Pony Package. It's way too big, IMO.
As far as I know, no one has come out with anything that will attach it to the grille. You'll just have to come up with your own mounting system.
#205
Originally Posted by MTAS
As an admitted simpleton, I'm gonna need a quick pic of that
#207
Originally Posted by tx_pony
I had the same problem with clearance - here's a photo (before painting) of how I notched the area just to the right of the hood latch. This also gives enough clearance to rotate the bulb holder for bulb replacement. I used a Dremel with a cutoff wheel.
I received my grille today and took a quick look at it before heading out to dinner. Um....WOW - there is no way I'll believe that any company other than the one that made the OEM grille made this one. The detail/texture is phenomenal Can't wait to put it on my car
#209
Originally Posted by tx_pony
I had the same problem with clearance - here's a photo (before painting) of how I notched the area just to the right of the hood latch. This also gives enough clearance to rotate the bulb holder for bulb replacement. I used a Dremel with a cutoff wheel.
#210
Originally Posted by StangNut
Pony emblem looks a little low, but otherwise, !
To answer Irish's question, get a SN95 left front fender tribar emblem. Perfect size, and just stick in on the grill with the tape on the back. It will stay.
#211
Originally Posted by tx_pony
I had the same problem with clearance - here's a photo (before painting) of how I notched the area just to the right of the hood latch. This also gives enough clearance to rotate the bulb holder for bulb replacement. I used a Dremel with a cutoff wheel.
Yep broke down and did the same. Dewalt cutoff tool went through like a warm knife hrough butter.
#212
three things on the install:
1) The car looked pretty cool with no grill.
2) For the fogs to mount flush, the grill needed some
trimming by the inner/upper screw boss for each fog.
3) I also cut off some metal for clearance of the left fog.
Looks great!
1) The car looked pretty cool with no grill.
2) For the fogs to mount flush, the grill needed some
trimming by the inner/upper screw boss for each fog.
3) I also cut off some metal for clearance of the left fog.
Looks great!
#215
I went with a larger emblem on the front grille. If you look at the size of the pony on the stock grille it is pretty darn big. Here it is and I have gotten lots of wows!
Last edited by GRAYPNY; 9/15/10 at 06:36 PM.
#216
Originally Posted by Hatchman
How did you attatch the pony to the grill?
#217
Originally Posted by Mista_03BlackV6
I just used the double sided tape thats on it..... Its slightly off and I was gonna pull it off and recenter it buts on there pretty good.....
Graynpy's emblem is just a little too beaucoup. IMO
#218
Originally Posted by hawgman
So after all the hoopla over the SS grill being bugeyed and that was supposed to make the fog lights clear the latch mount you guys are still having to notch to get them to fit?
I don't understand their problem,I mounted my lights the same as they were on the stock grille,clipped on the extension wires,sat the grille on the bumper,lined up the tabs and gently pushed into place. There were no wiring hangups. I put the rad cover in place and inserted new pushpins, it is solid as a rock. Mine came with black plastic donuts, which I did not use when screwing the lights into the grille. Perhaps that is the reason for their clearance problems.If it does touch some parts of the crossmember and it looks good and everything buttons up tight ,then what are all the clearance problems. If it makes slight contact and looks okay maybe the contact will make it more solid.I don't want to insult anyone ,but it has to look right to me or I won't use it.Mine fits great ,1000% better than the KSR product ever did!
#219
Originally Posted by GRAYPNY
I went with a larger emblem on the front grille. If you look at the size of the pony on the stock grille it is pretty darn big. Here it is and I have gotten lots of wows!