Ponies on The Run (Again)
#6441
I don't guess it has occurred to anyone that perhaps it has anything to do with the fact that this thread is 322 pages? Probably from a pure database perspective, you're taxing the app to find the exact posts for the pages that you are after.
#6442
But, as it sits now, the crome bezel is fine.
Mike, nobody is more picky than Tom (here in TMS)... trust me. He was loosing sleep over 1/32" height difference between the left and right sides of his car!
Nuff said.
Nope. The ones I ordered today are the shorter ones, they don't extend into the door, just under the 'GT' fender emblem.
#6443
This thread is a little slower due to the 323 pages ( ). But, in general, the forum is going slow, and is always down/unavailable.
#6444
Flowmasters vs Stingers RD 2.
http://forums.bradbarnett.net/showthread.php?t=61236
IMO Stingers sound better.
http://forums.bradbarnett.net/showthread.php?t=61236
IMO Stingers sound better.
I'll shoot from the hip here.. The Flows sound tinny at the higher RPM's.
Leo, I'll keep an eye out for a set of used Stingers for you.
#6445
When it comes to the car as it came from the factory, I say this to myself:
"It's still a FORD....unfortunately" Although, when things go nicely on the car, I say "It's not a Ford, it's a mustang"
#6446
And good luck finding a specific topic in the 300+ pages, if you don't bookmark the post, it'll basically be lost forever! The search feature only will direct you to this thread, not the post.
#6447
Thanks. I'm hoping to find some one in SD who's willing to let me borrow they're stingers for a couple days to see if I can tolerate the extra drone.
#6448
Out of curiosity, did you notice you have a chrome license plate frame with the black tail outlines, and a black license plate frame with chrome outlines.
Maybe that is giving you an optical delusion I wonder if you would like one outline more than the other if you switch the frames around??
Maybe that is giving you an optical delusion I wonder if you would like one outline more than the other if you switch the frames around??
You can search to the post. On the bottom left in advanced search, choose 'show results as posts'.
#6449
Thanks to mikes rx, I just ordered the Aeroform Sports Bar. Watch out, Chuck!
They just added a few more specials on eBay:
http://cgi.ebay.com/ebaymotors/2005-...spagenameZWDVW
Can you believe that's the same item as this:
http://cgi.ebay.com/ebaymotors/2005-...spagenameZWD1V
That's a $136.35 savings! I'll call on Monday to ask if they can ship it quickly so I'll have it in time for the FFW. Kinda hard to ask for expedited shipping when it's free, though. I'm sure if they ship it Monday or Tuesday, I'll have it Friday from MO.
They just added a few more specials on eBay:
http://cgi.ebay.com/ebaymotors/2005-...spagenameZWDVW
Can you believe that's the same item as this:
http://cgi.ebay.com/ebaymotors/2005-...spagenameZWD1V
That's a $136.35 savings! I'll call on Monday to ask if they can ship it quickly so I'll have it in time for the FFW. Kinda hard to ask for expedited shipping when it's free, though. I'm sure if they ship it Monday or Tuesday, I'll have it Friday from MO.
http://cgi.ebay.com/ebaymotors/2005-...QQcmdZViewItem
#6450
Originally Posted by TacoBill
And good luck finding a specific topic in the 300+ pages, if you don't bookmark the post, it'll basically be lost forever! The search feature only will direct you to this thread, not the post.
Originally Posted by 89Trooper
You can search to the post. On the bottom left in advanced search, choose 'show results as posts'.
#6451
Tom, looks like you purchased the bar at the PERFECT time, as they have increased it slightly:
http://cgi.ebay.com/ebaymotors/2005-...QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/2005-...QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/ws/eB...5163473&rd=1,1
They had 3 up like that and 2 are gone already.
#6452
That's right, sorry Tom. Still, you do strive for perfection in areas where others would consider negligible.
And all this time...
I think you mean someone with a CONVERTIBLE.
I think you mean someone with a CONVERTIBLE.
#6454
#6455
#6457
Sorry to go off-topic here, but Bill, is there an easy way to do more than one quote in a message.
When I do it, I have to cut and paste what I want quoted, and manually type the "quote= member name.../quote" around it. (You can see from my post above that I don't have the arrow so that you can go to the original post)
Also, I've tried using the "multi-quote" for a single message, and can't get that to work at all.
Any advice?
When I do it, I have to cut and paste what I want quoted, and manually type the "quote= member name.../quote" around it. (You can see from my post above that I don't have the arrow so that you can go to the original post)
Also, I've tried using the "multi-quote" for a single message, and can't get that to work at all.
Any advice?
#6458
Sorry to go off-topic here, but Bill, is there an easy way to do more than one quote in a message.
When I do it, I have to cut and paste what I want quoted, and manually type the "quote= member name.../quote" around it. (You can see from my post above that I don't have the arrow so that you can go to the original post)
Also, I've tried using the "multi-quote" for a single message, and can't get that to work at all.
Any advice?
When I do it, I have to cut and paste what I want quoted, and manually type the "quote= member name.../quote" around it. (You can see from my post above that I don't have the arrow so that you can go to the original post)
Also, I've tried using the "multi-quote" for a single message, and can't get that to work at all.
Any advice?
#6459
Sorry to go off-topic here, but Bill, is there an easy way to do more than one quote in a message.
When I do it, I have to cut and paste what I want quoted, and manually type the "quote= member name.../quote" around it. (You can see from my post above that I don't have the arrow so that you can go to the original post)
Also, I've tried using the "multi-quote" for a single message, and can't get that to work at all.
Any advice?
When I do it, I have to cut and paste what I want quoted, and manually type the "quote= member name.../quote" around it. (You can see from my post above that I don't have the arrow so that you can go to the original post)
Also, I've tried using the "multi-quote" for a single message, and can't get that to work at all.
Any advice?
Thanks for the help
#6460
Finally got my strut tower covers yesterday. My new digicam should be here today so I'll finally be able to start taking pics again.
I Called MWAG yesterday about the status of my radiator cover extensions and was told that they may or may not ship out this week.
I Called MWAG yesterday about the status of my radiator cover extensions and was told that they may or may not ship out this week.