What did you do with your Mustang today?
4/22/15, 07:03 AM
#8322
I Have No Life
Probably going to reassemble with the stock hood until it gets sorted out between Sinister and Cervini's. Still waiting on the SHR louvers too. Dropped off the Roush chin and lower grille parts. Still have to paint some pieces. I'm going to hold off on installing the side splitters until I can paint them. Just don't have time now that I'm back at work full time. Here's another teaser. The shaved fenders and quarter panels look AMAZING. The spoiler is off right now too, and I almost love the spoilerless look too 
4/22/15, 11:12 AM
#8323
GT Member
Installed a set of Powerstop drilled/slotted rotors and ceramic brake pads. They seem to have more stopping power, but I haven't really tested them yet. They sure look better than the stock rotors. 
4/22/15, 11:23 AM
#8324
FR500 Member
4/22/15, 02:20 PM
#8325
Legacy TMS Member
Update, hood is getting replaced. Cervini's is going to rush ship the new one to the body shop directly...though I don't know how they are going to rush an item that gets shipped freight. Whatever lol. Quarter windows will be at the shop Friday. Sometime next week, I'll have this car back!
List of items being done to the car:
- 5.0 emblems removed, holes plug welded and filled.
- Radio and GPS antennas removed, holes plugged and welded.
- Repairs from accident completed
- Entire car being repainted factory Ingot Silver minus the bumpers
- Grille fogs removed; CS fogs installed plus Diode Dynamics yellow XP80 bulbs
- Roush chin and lower grille delete installed. I will install the side and rear splitters when the car gets home
- Tru Fiber license plate panel installed, custom painted VHT Wrinkle Plus satin black
- RTR decklid and tail lights removed, MMD tail light bezels and RTR decklid repainted VHT Wrinkle Plus
Eventually I will paint the upper grille and Roush parts all VHT Wrinkle Plus. I'm also considering adding halos to the empty fog grille openings, unless I just get the CDC upper grille delete.
List of items being done to the car:
- 5.0 emblems removed, holes plug welded and filled.
- Radio and GPS antennas removed, holes plugged and welded.
- Repairs from accident completed
- Entire car being repainted factory Ingot Silver minus the bumpers
- Grille fogs removed; CS fogs installed plus Diode Dynamics yellow XP80 bulbs
- Roush chin and lower grille delete installed. I will install the side and rear splitters when the car gets home
- Tru Fiber license plate panel installed, custom painted VHT Wrinkle Plus satin black
- RTR decklid and tail lights removed, MMD tail light bezels and RTR decklid repainted VHT Wrinkle Plus
Eventually I will paint the upper grille and Roush parts all VHT Wrinkle Plus. I'm also considering adding halos to the empty fog grille openings, unless I just get the CDC upper grille delete.
4/22/15, 02:22 PM
#8326
Cobra R Member
Update, hood is getting replaced. Cervini's is going to rush ship the new one to the body shop directly...though I don't know how they are going to rush an item that gets shipped freight. Whatever lol. Quarter windows will be at the shop Friday. Sometime next week, I'll have this car back!
List of items being done to the car:
- 5.0 emblems removed, holes plug welded and filled.
- Radio and GPS antennas removed, holes plugged and welded.
- Repairs from accident completed
- Entire car being repainted factory Ingot Silver minus the bumpers
- Grille fogs removed; CS fogs installed plus Diode Dynamics yellow XP80 bulbs
- Roush chin and lower grille delete installed. I will install the side and rear splitters when the car gets home
- Tru Fiber license plate panel installed, custom painted VHT Wrinkle Plus satin black
- RTR decklid and tail lights removed, MMD tail light bezels and RTR decklid repainted VHT Wrinkle Plus
Eventually I will paint the upper grille and Roush parts all VHT Wrinkle Plus. I'm also considering adding halos to the empty fog grille openings, unless I just get the CDC upper grille delete.
List of items being done to the car:
- 5.0 emblems removed, holes plug welded and filled.
- Radio and GPS antennas removed, holes plugged and welded.
- Repairs from accident completed
- Entire car being repainted factory Ingot Silver minus the bumpers
- Grille fogs removed; CS fogs installed plus Diode Dynamics yellow XP80 bulbs
- Roush chin and lower grille delete installed. I will install the side and rear splitters when the car gets home
- Tru Fiber license plate panel installed, custom painted VHT Wrinkle Plus satin black
- RTR decklid and tail lights removed, MMD tail light bezels and RTR decklid repainted VHT Wrinkle Plus
Eventually I will paint the upper grille and Roush parts all VHT Wrinkle Plus. I'm also considering adding halos to the empty fog grille openings, unless I just get the CDC upper grille delete.
I bet you see it within 3 days from shipping.
4/22/15, 02:24 PM
#8327
Legacy TMS Member
Forgot to add the SHR prepainted louver/quarter windows to my list! Next up will be radio and GPS antenna relocation project, probably just move the GPS antenna into the car in the back window. Radio antenna, we'll see since I never ever use the radio anyways. After that, prepainted GT500 spoiler, though I might get it unpainted and have the factory backup cam molded into it so it all looks OEM and I don't have to worry about splicing the cable for the camera.
4/22/15, 04:06 PM
#8328
Roush Forum Stalker
Was planning on going for a little cruise after supper today because it's a pretty nice day out there, but, of course, had to work late! It never fails! lol
But, I did sent off another check this morning. No payment due till April of 2017.
But, I did sent off another check this morning. No payment due till April of 2017.
4/22/15, 05:24 PM
#8329
Cobra Member
Today I opened up a Christmas present i got this past year and did a two stage polishing/waxing on it.
Last edited by lowblustang00; 4/22/15 at 05:30 PM.
4/22/15, 07:10 PM
#8330
2013 RR Boss 302 #2342
Join Date: March 6, 2012
Location: Lancaster, PA
Posts: 11,734
Likes: 0
Received 2,252 Likes
on
1,678 Posts
4/22/15, 07:35 PM
#8331
Join Date: December 5, 2006
Location: Trapped in Minnesota
Posts: 31,619
Likes: 0
Received 70 Likes
on
66 Posts
Update, hood is getting replaced. Cervini's is going to rush ship the new one to the body shop directly...though I don't know how they are going to rush an item that gets shipped freight. Whatever lol. Quarter windows will be at the shop Friday. Sometime next week, I'll have this car back!
List of items being done to the car:
- 5.0 emblems removed, holes plug welded and filled.
- Radio and GPS antennas removed, holes plugged and welded.
- Repairs from accident completed
- Entire car being repainted factory Ingot Silver minus the bumpers
- Grille fogs removed; CS fogs installed plus Diode Dynamics yellow XP80 bulbs
- Roush chin and lower grille delete installed. I will install the side and rear splitters when the car gets home
- Tru Fiber license plate panel installed, custom painted VHT Wrinkle Plus satin black
- RTR decklid and tail lights removed, MMD tail light bezels and RTR decklid repainted VHT Wrinkle Plus
Eventually I will paint the upper grille and Roush parts all VHT Wrinkle Plus. I'm also considering adding halos to the empty fog grille openings, unless I just get the CDC upper grille delete.
List of items being done to the car:
- 5.0 emblems removed, holes plug welded and filled.
- Radio and GPS antennas removed, holes plugged and welded.
- Repairs from accident completed
- Entire car being repainted factory Ingot Silver minus the bumpers
- Grille fogs removed; CS fogs installed plus Diode Dynamics yellow XP80 bulbs
- Roush chin and lower grille delete installed. I will install the side and rear splitters when the car gets home
- Tru Fiber license plate panel installed, custom painted VHT Wrinkle Plus satin black
- RTR decklid and tail lights removed, MMD tail light bezels and RTR decklid repainted VHT Wrinkle Plus
Eventually I will paint the upper grille and Roush parts all VHT Wrinkle Plus. I'm also considering adding halos to the empty fog grille openings, unless I just get the CDC upper grille delete.
4/23/15, 06:20 AM
#8333
I Have No Life
been doing nothing with her for the last week. Washed and detailed last Wednesday, then just stored in garage. Put about 2 coats of Souveran on her, then just let her sit and wipe down every couple days. Not because the weather is bad, just because I don't want her to get dirty.
4/23/15, 06:21 AM
#8334
I Have No Life
4/23/15, 10:24 AM
#8337
Shelby GT500 Member
