What did you do with your Mustang today?
#8001
Legacy TMS Member
#8003
Legacy TMS Member
I autocrossed the car with the set-up below with no issues
(285/40/18 Goodyear Eagle tires on SVT 18x9.5 wheels)
Last edited by Gabe; 3/14/15 at 09:31 PM.
#8004
2013 RR Boss 302 #2342
Join Date: March 6, 2012
Location: Lancaster, PA
Posts: 11,813
Likes: 0
Received 2,318 Likes
on
1,729 Posts
Wow that seems to close for comfort?
#8005
I Have No Life
#8006
Legacy TMS Member
Today I went ahead and finished the rear 14" brake upgrade, then test-fitted the new AMR wheels. The right-rear brake set-up: Left-front wheel installed (19x10 wheel, 275/40/19 tire): Left-rear wheel installed (20x10 wheel, 305/35/20 tire): Both left-side wheels installed: Before I left, I took a sneak-peek pic of the next items that will be getting installed under the hood
Last edited by GrnT; 3/15/15 at 06:34 AM.
#8007
I got mine out of the garage finally - had to clear over a foot of snow first. Then loaded it on the trailer to take it to MRT in Plymouth, MI. Replacing the engine, took out 2 piston ring lands (one on each bank) on the first WOT test last year with the turbo. So new engine and start tuning all over again, with a different tuner this time.
#8012
Legacy TMS Member
#8013
Legacy TMS Member
Thanks Mark!
Lol Burton ... you saw my previous 285-wide front set-up and how close THEY were to that stud and the strut body, and it had NO rubbing ...
Lol Burton ... you saw my previous 285-wide front set-up and how close THEY were to that stud and the strut body, and it had NO rubbing ...
#8014
V6 Member
Changing of the Guard
Took both steeds out for feed and wash. Put La Bestia into the stall and onto a battery tender. Traga Gasolina is now in the alert 5 position. I will switch them in a few weeks.
#8015
Roush Forum Stalker
#8017
Legacy TMS Member
Shouldn't be an issue. The tire has no reason to flex up there, there's nothing pushing it, unlike at the contact patch where the friction with the pavement pushes it to one side or the other during cornering
I autocrossed the car with the set-up below with no issues
(285/40/18 Goodyear Eagle tires on SVT 18x9.5 wheels)
I autocrossed the car with the set-up below with no issues
(285/40/18 Goodyear Eagle tires on SVT 18x9.5 wheels)
But if you want a little more clearance, I don't see why you can't grind down that endlink stud a little bit. It looks like you have the newer style of endlink with the hex holding flange built into the stud near the socket (so no worries about having to use a holding wrench on the end of the stud.
#8018
Legacy TMS Member
Speaking of wheels, I finally gave in to Plasti Dip. Got all 4 wheels done, but still too cold out to mount these (summer tires).
BTW--if anyone tells you that you don't have to mask off the sidewall because it peels off...make them clean it up. That's the last time I'll do that.
BTW--if anyone tells you that you don't have to mask off the sidewall because it peels off...make them clean it up. That's the last time I'll do that.
#8019
Legacy TMS Member
You're a brave man. I'd be worried that some way, some how, they'd somehow twist and flex and make contact. However unlikely that is, especially if you've done AutoX with a similar setup.
But if you want a little more clearance, I don't see why you can't grind down that endlink stud a little bit. It looks like you have the newer style of endlink with the hex holding flange built into the stud near the socket (so no worries about having to use a holding wrench on the end of the stud.
But if you want a little more clearance, I don't see why you can't grind down that endlink stud a little bit. It looks like you have the newer style of endlink with the hex holding flange built into the stud near the socket (so no worries about having to use a holding wrench on the end of the stud.
Anyway, tomorrow these rims are coming back off until the end of the month when the car's going into the World Of Wheels car show in Boston.
When the car comes home it will finally get driven on these wheels.
Until then, it will just be a stationary display with them on for 3 days
#8020
Super Boss Lawman Member
Speaking of wheels, I finally gave in to Plasti Dip. Got all 4 wheels done, but still too cold out to mount these (summer tires).
BTW--if anyone tells you that you don't have to mask off the sidewall because it peels off...make them clean it up. That's the last time I'll do that.
BTW--if anyone tells you that you don't have to mask off the sidewall because it peels off...make them clean it up. That's the last time I'll do that.