'10-14 Interior and Audio Place to discuss 2010-2014 interior and audio type modifications.

Got my new "Flip Key" set up tonight

Old Aug 18, 2014 | 01:40 PM
  #161  
newpony's Avatar
Mach 1 Member
 
Joined: May 24, 2010
Posts: 873
Likes: 1
From: MA
There are two sets of instructions. One for the remote entry lock/unlock functions and another for to make the key start your vehicle. I suspect you only did the first one.
Reply
Old Aug 18, 2014 | 01:46 PM
  #162  
JWButler14's Avatar
Member
 
Joined: December 31, 2010
Posts: 24
Likes: 0
From: Macon, Ga.
Originally Posted by newpony
There are two sets of instructions. One for the remote entry lock/unlock functions and another for to make the key start your vehicle. I suspect you only did the first one.
I've done both. The keyless entry worked on the first try. But I have tried many times to program it to pats but it just won't program.
Reply
Old Aug 18, 2014 | 02:05 PM
  #163  
newpony's Avatar
Mach 1 Member
 
Joined: May 24, 2010
Posts: 873
Likes: 1
From: MA
Originally Posted by JWButler14
I've done both. The keyless entry worked on the first try. But I have tried many times to program it to pats but it just won't program.
In that case either you key fob is bad or was already programed to work with a different car. It is a one time deal from what I heard. Ask for a replacement.
Reply
Old Aug 19, 2014 | 08:24 PM
  #164  
JWButler14's Avatar
Member
 
Joined: December 31, 2010
Posts: 24
Likes: 0
From: Macon, Ga.
I had to take my key apart to get it cut could that be a problem?
Reply
Old Aug 19, 2014 | 09:12 PM
  #165  
Krohn's Avatar
Mach 1 Member
 
Joined: April 11, 2012
Posts: 981
Likes: 4
From: Houston, TX
Originally Posted by berzerk_1980
That is a bummer. I've been meaning to order the stickers. Did you get the pony or the 5.0, and did you try the "adhesion promoter"?
Same guy... mine said Boss 302... and the ink was bleeding as if I printed them on an old printer. And then they did have the nice gel coat over the print... which flattened the back making it where they did not adhere to a concave surface. at least it was only $6.
Reply
Old Aug 19, 2014 | 09:20 PM
  #166  
berzerk_1980's Avatar
Mach 1 Member
 
Joined: April 30, 2014
Posts: 936
Likes: 40
Originally Posted by Krohn
Same guy... mine said Boss 302... and the ink was bleeding as if I printed them on an old printer. And then they did have the nice gel coat over the print... which flattened the back making it where they did not adhere to a concave surface. at least it was only $6.
Krohn,
The following is the adhesion promoter I meant (from post #35). Have you tried this to get the sticker to stay?

Originally Posted by Locotone07
Lol.
Had them made by Andres: http://stores.ebay.com/Stickers-3D
Paid $6 for eight of them. He's in Spain, so it'll take about a week.
Specify 14mm, smaller gel (more flexible).
If you take a good look you'll see the surface the sticker will mount to is not flat, but domed, which creates some difficulty for sticker to remain adhered, I've had success using 3m adhesive promoter: http://r.ebay.com/1wMnqS

Last edited by berzerk_1980; Aug 19, 2014 at 09:21 PM. Reason: Add quote
Reply
Old Aug 22, 2014 | 10:42 AM
  #167  
corranhorn's Avatar
Member
 
Joined: August 18, 2014
Posts: 16
Likes: 0
From: Rockwall, TX
Just ordered my stickers and flip key. Has anyone tried to have their track key programmed for one of these? Would we need to have it already programmed for the car?
Reply
Old Sep 3, 2014 | 09:35 AM
  #168  
NacsMXer's Avatar
GT Member
 
Joined: July 9, 2014
Posts: 139
Likes: 3
I'm interested in doing this mod.

Have you guys experienced any negative side effects going to the aftermarket flip keys? I've noticed people saying so far that the key needs to be inserted a certain way, etc? I don't want to have to fiddle with it every time I start the car.

Also people have said that the trunk takes longer to pop? How about the range vs. the factory fob?

Thanks!
Reply
Old Sep 3, 2014 | 10:11 AM
  #169  
G Wrecks's Avatar
Mach 1 Member
 
Joined: January 10, 2011
Posts: 561
Likes: 0
From: Houston
My only complaint is that the range is terrible.
Reply
Old Sep 3, 2014 | 12:36 PM
  #170  
berzerk_1980's Avatar
Mach 1 Member
 
Joined: April 30, 2014
Posts: 936
Likes: 40
Originally Posted by NacsMXer
I'm interested in doing this mod.

Have you guys experienced any negative side effects going to the aftermarket flip keys? I've noticed people saying so far that the key needs to be inserted a certain way, etc? I don't want to have to fiddle with it every time I start the car.

Also people have said that the trunk takes longer to pop? How about the range vs. the factory fob?

Thanks!
No problems with fitment. Didn't compare the range but doesn't seem to go more than about 30 feet away, and I do have to pause between clicks to make the trunk pop.

Another thing that I had to get used to is the way you hold the key. Hard to explain but the key is parallel to the short side of the fob, not the long side. So if you hold it in your hand like your old key you will have to rotate your hand 90 degrees for it to go into the ignition.
Reply
Old Sep 3, 2014 | 02:45 PM
  #171  
stupidgenius36's Avatar
Just Plain Rude!
 
Joined: February 1, 2004
Posts: 3,393
Likes: 18
From: Denton, TX
Originally Posted by NacsMXer
I'm interested in doing this mod.

Have you guys experienced any negative side effects going to the aftermarket flip keys? I've noticed people saying so far that the key needs to be inserted a certain way, etc? I don't want to have to fiddle with it every time I start the car.

Also people have said that the trunk takes longer to pop? How about the range vs. the factory fob?

Thanks!
Mine prefers to be inserted with the buttons facing away from me. I say "prefers", because it will work either way...but it can be slightly finicky with the buttons facing me.

I haven't noticed any issues with popping the trunk.

The range is worse than stock, but not by much. The stock range is pretty terrible to begin with...

I consider those issues to be very slight, and I've never regretted this purchase.
Reply
Old Sep 4, 2014 | 11:59 PM
  #172  
VIP1's Avatar
GT Member
 
Joined: June 11, 2014
Posts: 184
Likes: 9
From: Eastern, MA
I have no lasting problems with mine other than for a short while, the car "forgot" the remote part. The key still opened the doors and started the car, but the remote buttons wouldn't open or lock the car. However, locking and unlocking the doors a few times back-to-back with the key (not remote) "fixed" it. No problems since. Range is great. Way better than the stock fobs on my Firebird.

The key I have (for the Mustang) is a replica of a Mazda Key.
Others on here have used a replica of a VW/Audi Key.

My brother has an Audi S4 and I didn't want to have the same key as him. I wanted to have something different. So they couldn't be confused.

Last edited by VIP1; Sep 5, 2014 at 12:04 AM.
Reply
Old Oct 15, 2014 | 03:15 AM
  #173  
Paten's Avatar
Member
 
Joined: July 31, 2014
Posts: 30
Likes: 1
Just got mine set up a couple of weeks ago but just received my decals for the back on Monday. Works great.
Attached Thumbnails Got my new "Flip Key" set up tonight-flip-key.jpg  
Reply
Old Oct 15, 2014 | 08:41 AM
  #174  
berzerk_1980's Avatar
Mach 1 Member
 
Joined: April 30, 2014
Posts: 936
Likes: 40
Originally Posted by Paten
Just got mine set up a couple of weeks ago but just received my decals for the back on Monday. Works great.
Where'd you get the decals? The eBay seller mentioned earlier in the thread or elsewhere?
Reply
Old Oct 15, 2014 | 10:05 AM
  #175  
Paten's Avatar
Member
 
Joined: July 31, 2014
Posts: 30
Likes: 1
Yes, I used the ebay seller mentioned earlier in this thread. I found the image online and sent him a message thru ebay to see if he would use it to make the decal. It took about 2 weeks or so after I bought it on ebay before I received it in the mail from Spain. Not a bad deal.
Attached Images  
Reply
Old Aug 7, 2016 | 12:41 AM
  #176  
CriticalmassGT's Avatar
GT Member
 
Joined: January 30, 2015
Posts: 149
Likes: 1
From: Greenville, SC
Originally Posted by dball584
Just got back from getting my key cut at the lock smith. The key works great. The trunk button has a slightly longer delay but its not an issue for me. The running horse sticker is a perfect fit. The website for te logo stickers is www.all3dstickers.com

All in all this is a really cool aftermarket key and the price was nice.

$25 for the key
$4 for the cut
$5 to program
$6 for the 8 pack of logos

Grand total of $40.00 👍

Dealers charge about $225 for and oem key without the flip key part.



Attachment 142719
Is the oem domed decal larger? Maybe 15mm? Can anyone measure it?
Reply
Old Aug 9, 2016 | 01:42 AM
  #177  
Paten's Avatar
Member
 
Joined: July 31, 2014
Posts: 30
Likes: 1
Seeing this post back at the top of the page made me go check out flip keys on ebay. It looks like there are 3 new designs since the last time I looked for them.


NEW GT STYLE FLIP KEY REMOTE FOR 2011-14 FORD MUSTANG CLICKER CHIP KEYLESS ENTRY

CHROME FLIP KEY REMOTE FOR 07-14 FORD MUSTANG CHIP KEYLESS ENTRY TRANSMITTER FOB

New Style FORD 07-14 MUSTANG FLIP CHIP KEY KEYLESS ENTRY TRANSMITTER REMOTE KFM

I might try out that one in the first link.
Reply
Old Aug 9, 2016 | 05:15 PM
  #178  
harleycharlie 1992's Avatar
Member
 
Joined: August 9, 2016
Posts: 49
Likes: 287
From: San Diego
subscribe!
Reply
Old Aug 9, 2016 | 05:27 PM
  #179  
Gabe's Avatar
Legacy TMS Member
 
Joined: August 7, 2011
Posts: 5,246
Likes: 567
From: NC
Still using mine every time I drive the car.
The other keys are in a safe
Reply
Old Aug 23, 2016 | 12:28 AM
  #180  
Paten's Avatar
Member
 
Joined: July 31, 2014
Posts: 30
Likes: 1
Received my new flip key from the auction listed above. I have to say that this is the flip key I wanted from the beginning. Had it cut this morning and programmed it right after. Works just as well as my other flip key. If you have $40 burning a hole in your pocket, then this key is the one to get.

I had to take the key apart so the guy could cut it but it was pretty easy to do. If you pay attention to how you took it apart, it's easy to put it back together.
Attached Thumbnails Got my new "Flip Key" set up tonight-key-front-small.jpg   Got my new "Flip Key" set up tonight-key-back-small.jpg   Got my new "Flip Key" set up tonight-key-open-small.jpg  
Reply

Thread Tools
Search this Thread

All times are GMT -6. The time now is 09:02 PM.