"Street Stalker" package from LMR
#22
Mach 1 Member
Thread Starter
Join Date: January 10, 2011
Location: Houston
Posts: 561
Likes: 0
Received 0 Likes
on
0 Posts
Well I'm glad I got this feedback. This is my car, but I'm the sales manager at Late Model Racecraft, so all this was performed for free for me. I understand that the labor rate is high, but we are typically doing quite a bit of custom fabrication at our shop. We are most known for our ls based cars. The main reason we are working on fords now is because I have one! Lol. Not only that but ford finally has a good mustang that can compete with the camaros without having to go forced induction.
Check us out on Facebook, I'm constantly adding photos and info on our current builds. We are currently putting a 4.0L whipple on a 2013 GT500. It should make some crazy power, but unfortunately the new 5.8L motor blows head gaskets when you push more than 800rwhp... We'll find that our though!
Thanks again for the feedback, and I'll see if I can sharpen my pencil and get our package prices down.
Garrett
Check us out on Facebook, I'm constantly adding photos and info on our current builds. We are currently putting a 4.0L whipple on a 2013 GT500. It should make some crazy power, but unfortunately the new 5.8L motor blows head gaskets when you push more than 800rwhp... We'll find that our though!
Thanks again for the feedback, and I'll see if I can sharpen my pencil and get our package prices down.
Garrett
#23
Mach 1 Member
You're all way off!!! I hate seeing ignorant tards try math. Ill enlighten you all.
You multiply .15 by 1.21 gigawatts then take the barometric pressure times 88 mph.
This place won't always have such a smart man like myself to fix your arithmetic.
Serious now, nice gains OP. congrats!
You multiply .15 by 1.21 gigawatts then take the barometric pressure times 88 mph.
This place won't always have such a smart man like myself to fix your arithmetic.
Serious now, nice gains OP. congrats!
#24
V6 Member
Join Date: January 2, 2013
Location: Raleigh NC
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
#25
Mach 1 Member
Thread Starter
Join Date: January 10, 2011
Location: Houston
Posts: 561
Likes: 0
Received 0 Likes
on
0 Posts
Alright guys,
I've sharpened the crap out of my pencil and got the price waaaaay down. I've updated the price on our website.
Everything is the same as before except that now the price for everything installed and tuned is $1,899
Is that better guys?
http://latemodelracecraft.com/mustan...etstalker.html
I've sharpened the crap out of my pencil and got the price waaaaay down. I've updated the price on our website.
Everything is the same as before except that now the price for everything installed and tuned is $1,899
Is that better guys?
http://latemodelracecraft.com/mustan...etstalker.html
#26
Bullitt Member
Join Date: June 24, 2011
Location: Chula Vista, Ca.
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
#27
Sorry bud but you got raped! A custom dyno tune(which should only be around 400 or less for those minor changes) wasn't even necessary. Any canned tune nowadays would be perfect for a catback and cai. Could of gotten those parts from AM with the forum discount for $1496.45. That would've included a tuner with 3 custom tunes for life. Easiest parts to install too. That was $1100 wasted IMHO! Not trying to be a jerk, just thought you should know.
#28
Mach 1 Member
Thread Starter
Join Date: January 10, 2011
Location: Houston
Posts: 561
Likes: 0
Received 0 Likes
on
0 Posts
#29
Bullitt Member
Nice numbers, congrats
13:1 on a FI motor? 12:1 @ WOT on a FI motor is still considered lean form a lot of tuners.
13:1 on a FI motor? 12:1 @ WOT on a FI motor is still considered lean form a lot of tuners.
Last edited by Scuba-Matt; 1/26/13 at 11:33 AM.
#30
Mach 1 Member
Thread Starter
Join Date: January 10, 2011
Location: Houston
Posts: 561
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post