AFBLUE cancels his 08 mustang order for an 08 SGT Cpe
10/30/08, 07:03 PM
#341
GT Member
Join Date: January 3, 2005
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Your car is awesome AFBLUE. What a bold move to put the Terlingu stripes on it. I like it. It makes it look much faster . So is that a Shelby stripe kit, or did you figure out how to do that on your own?
10/30/08, 08:23 PM
#342
Dethroned Nascar Guru
Thread Starter
Not bold...I just jumped on the bandwagon. http://www.teamshelby.com/forums/ind...howtopic=31682
I initially wasn't a fan, but I figured if i didn't like it I could always take them off later and not be out of too much money. I initially had yellow ones on there but it was not to my liking so I switched to match the hood stripes.
No it's not a Stripe kit. Just go to your local graphics shop and get two 2" wide stripes of the color of your choice, about 20" long. I did it myself after the thread starter of that link (rosssvt) provided some instructions, which I slightly modified for simplification of measurement of where the 1" gap should be on the fender wall/hood seam.
I initially wasn't a fan, but I figured if i didn't like it I could always take them off later and not be out of too much money. I initially had yellow ones on there but it was not to my liking so I switched to match the hood stripes.
No it's not a Stripe kit. Just go to your local graphics shop and get two 2" wide stripes of the color of your choice, about 20" long. I did it myself after the thread starter of that link (rosssvt) provided some instructions, which I slightly modified for simplification of measurement of where the 1" gap should be on the fender wall/hood seam.
Last edited by AFBLUE; 10/30/08 at 08:29 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Michael Follett
2005-2009 Mustang
4
7/24/15 06:58 AM