couple pics..
So there's not much of a color difference or transparancy in the windows with the ceramic tint, yet it blocks all that heat? It sounds impossible, but I'm very interested in trying to find someone around here that could do it.
Be careful what you order from CDC. That kit you mention is stock take-off parts (shocks and rear sway). Also, the springs are not lowering springs. So it's basically what you have on your car now. Like the old saying "If it sounds too good to be true, it probably is"
Last edited by goldhillstang; May 26, 2010 at 03:46 PM.
Be careful what you order from CDC. That kit you mention is stock take-off parts (shocks and rear sway). Also, the springs are not lowering springs. So it's basically what you have on your car now. Like the old saying "If it sounds too good to be true, it probably is"
Hi John!
The springs are Ford Racing part # M-5300-P, and will be included automatically w/ the Handling Pack order. Please be sure to choose whether you have a coupe or convertible, as those springs are different. The struts/shocks are part # M-18000-A. The sway bar is similar to the rear bar used in part # M-5490-B, but reuses the factory rubber mounts.
I hope this helps! If there is anything else at all I can assist with, please let me know. Thanks again,
Now that I know this, I'm thinking about pulling the trigger on this package.
Not exactly true. Here's a response to an email I sent them a couple days ago:
Hi John!
The springs are Ford Racing part # M-5300-P, and will be included automatically w/ the Handling Pack order. Please be sure to choose whether you have a coupe or convertible, as those springs are different. The struts/shocks are part # M-18000-A. The sway bar is similar to the rear bar used in part # M-5490-B, but reuses the factory rubber mounts.
I hope this helps! If there is anything else at all I can assist with, please let me know. Thanks again,
Now that I know this, I'm thinking about pulling the trigger on this package.
Hi John!
The springs are Ford Racing part # M-5300-P, and will be included automatically w/ the Handling Pack order. Please be sure to choose whether you have a coupe or convertible, as those springs are different. The struts/shocks are part # M-18000-A. The sway bar is similar to the rear bar used in part # M-5490-B, but reuses the factory rubber mounts.
I hope this helps! If there is anything else at all I can assist with, please let me know. Thanks again,
Now that I know this, I'm thinking about pulling the trigger on this package.
. The 5300-P springs are a 1" lowering spring yet the CDC website says they are not lowering springs. If the rear sway is from the M-5490-B kit it is bigger than stock yet they're saying you can re-use your stock bushings.
I say order it and let us all know what it is. If it's what they say it is, then it's got to be at least $685 worth of parts. Based on the lowest prices I've ever found for the parts listed. I just ordered the "P" springs, M-18000-A shocks and Eibach 35/24 f/r sways and paid $690 or I would order it myself to see what it is.
So the before and after pic was just you moving the car??? lol
Was a bit hard to see how the car looked with the first set of wheels to compare to the after pic? Did I miss something or do you not still have the antenna that can pickup stations in mars?
Tint sounds cool.
Was a bit hard to see how the car looked with the first set of wheels to compare to the after pic? Did I miss something or do you not still have the antenna that can pickup stations in mars?
Tint sounds cool.
Thread
Thread Starter
Forum
Replies
Last Post
Antigini-GT/CS
2005-2009 Mustang
5
Oct 5, 2015 09:43 AM
austin101385
'10-14 Shelby Mustangs
3
Oct 2, 2015 01:00 PM





