My Latest Power, "Safety", and Aesthetic Mods...
#21
Roush Forum Stalker
#22
I Have No Life
Thread Starter
#23
Legacy TMS Member
Are you replacing the upper large fogs with smaller C/S ones for that new lower facia?
Also, are you planning on the GT/CS or the Boss splitter?
Also, are you planning on the GT/CS or the Boss splitter?
#26
I Have No Life
Thread Starter
No, I am replacing the stock gt fogs with the halo ones. The ones will be custom made from new oem ford fogs but with smoked lenses, retrofitted with LED cob's (brighter than LED smd's and full ring even when viewed up close). I will be reusing my 6000k vled LEDs in the housing.
For now, plan is to leave the GTCS fascia lower fogs empty. Actually, I plan to do my own "mesh". Screen mesh painted matte black then attached on the back side to "close up" the holes but still allow air in. I know they sell the caps to plug the holes up, but I wanted to do my own.
Lol, so you can cancel after a month free subscription? Haha
Thanks Thomas. Yes sir, I am stoked!!!
#27
I Have No Life
Thread Starter
Update:
I went ahead and loaded the necessary software on my laptop to get ready for my custom tune install from jdm engineering later this week.
SCT X3/SF3 LW Updater
And
SCT LiveLink Gen II
(I had to manually load the SCT driver though, on win 7. You can see the livelink icon on the right side.)
Bring on the tune, baby.
I went ahead and loaded the necessary software on my laptop to get ready for my custom tune install from jdm engineering later this week.
SCT X3/SF3 LW Updater
And
SCT LiveLink Gen II
(I had to manually load the SCT driver though, on win 7. You can see the livelink icon on the right side.)
Bring on the tune, baby.
#28
Legacy TMS Member
Yeah, SCT's software doesn't play very nice with Windows 7 or 8.
I have 8, had to call SCT, their guy remotely took over my PC and fixed the issue.
I have 8, had to call SCT, their guy remotely took over my PC and fixed the issue.
#29
Mach 1 Member
Join Date: March 27, 2014
Location: Winnipeg, MB
Posts: 919
Likes: 0
Received 0 Likes
on
0 Posts
#31
I Have No Life
Thread Starter
I'm making my own cover... in fact, I worked on it last night. Pics below.
hey man... how you been? No pics yet, since she's not installed yet. We'll be out of town till Sunday, so I might do it Sunday. Or, I might wait till my halos come in later next week so I can do it all in one shot: valence and new fogs.
#33
I Have No Life
Thread Starter
Update:
Received my qty 8 Ford Racing -M50 plugs.
Waiting on the pulley, Roush intake, and tune (of course).
Edit: Wife just said a package arrived for me!!!
Power:
3.6 pulley - in transit from Magnuson (thanks Cindy!) - UPDATE (arrived 7/2)
Roush Intake - in transit from JDM (thanks Jim!)
JDM tune - arriving today/tomorrow
Gates SC Belt (shorter) - arrived today!
Safety: (not sure what else to call it...lol )
Ford Racing -M50 plugs - shipping today from Hypermotive (thanks Dan!) - UPDATE (arrived 7/2)
Bob's Oil Separator (standard kit) - arrived today!
- Anodized Fittings (blue) and SS braided lines soon!
Aesthetic:
GT/CS Fascia - shipping tomorrow or next week from Hypermotive (thanks Dan!) - UPDATE (arrived 6/30)
Custom Halo Fogs (smoked) - shipping in 2 weeks from HIDGuy (thanks Oscar!)
Custom SpeedDawg **** - installed.
Received my qty 8 Ford Racing -M50 plugs.
Waiting on the pulley, Roush intake, and tune (of course).
Edit: Wife just said a package arrived for me!!!
Power:
3.6 pulley - in transit from Magnuson (thanks Cindy!) - UPDATE (arrived 7/2)
Roush Intake - in transit from JDM (thanks Jim!)
JDM tune - arriving today/tomorrow
Gates SC Belt (shorter) - arrived today!
Safety: (not sure what else to call it...lol )
Ford Racing -M50 plugs - shipping today from Hypermotive (thanks Dan!) - UPDATE (arrived 7/2)
Bob's Oil Separator (standard kit) - arrived today!
- Anodized Fittings (blue) and SS braided lines soon!
Aesthetic:
GT/CS Fascia - shipping tomorrow or next week from Hypermotive (thanks Dan!) - UPDATE (arrived 6/30)
Custom Halo Fogs (smoked) - shipping in 2 weeks from HIDGuy (thanks Oscar!)
Custom SpeedDawg **** - installed.
Last edited by FromZto5; 7/2/14 at 01:25 PM.
#34
V6 Member
Join Date: November 6, 2013
Location: Daytona Beach, FL USA
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Update:
Received my qty 8 Ford Racing -M50 plugs.
Waiting on the pulley, Roush intake, and tune (of course).
Edit: Wife just said a package arrived for me!!!
Power:
3.6 pulley - in transit from Magnuson (thanks Cindy!) - UPDATE (arrived 7/2)
Roush Intake - in transit from JDM (thanks Jim!)
JDM tune - arriving today/tomorrow
Gates SC Belt (shorter) - arrived today!
Safety: (not sure what else to call it...lol )
Ford Racing -M50 plugs - shipping today from Hypermotive (thanks Dan!) - UPDATE (arrived 7/2)
Bob's Oil Separator (standard kit) - arrived today!
- Anodized Fittings (blue) and SS braided lines soon!
Aesthetic:
GT/CS Fascia - shipping tomorrow or next week from Hypermotive (thanks Dan!) - UPDATE (arrived 6/30)
Custom Halo Fogs (smoked) - shipping in 2 weeks from HIDGuy (thanks Oscar!)
Custom SpeedDawg **** - installed.
Received my qty 8 Ford Racing -M50 plugs.
Waiting on the pulley, Roush intake, and tune (of course).
Edit: Wife just said a package arrived for me!!!
Power:
3.6 pulley - in transit from Magnuson (thanks Cindy!) - UPDATE (arrived 7/2)
Roush Intake - in transit from JDM (thanks Jim!)
JDM tune - arriving today/tomorrow
Gates SC Belt (shorter) - arrived today!
Safety: (not sure what else to call it...lol )
Ford Racing -M50 plugs - shipping today from Hypermotive (thanks Dan!) - UPDATE (arrived 7/2)
Bob's Oil Separator (standard kit) - arrived today!
- Anodized Fittings (blue) and SS braided lines soon!
Aesthetic:
GT/CS Fascia - shipping tomorrow or next week from Hypermotive (thanks Dan!) - UPDATE (arrived 6/30)
Custom Halo Fogs (smoked) - shipping in 2 weeks from HIDGuy (thanks Oscar!)
Custom SpeedDawg **** - installed.
Lots of cool stuff there!
#35
I Have No Life
Thread Starter
So after I got home, I had another package waiting for me I was pleased to see that it was shiny stainless steel.
This will go very nicely with my silver strut brace and my silver oil separator.. I'm so glad I stayed with the silver for a little bit of "bling". Haha
Oh, and the second is proof that it's really 3.6 as opposed to the stock 3.9 Magnuson.
All I need now is the intake and the tune and I'm all set.
This will go very nicely with my silver strut brace and my silver oil separator.. I'm so glad I stayed with the silver for a little bit of "bling". Haha
Oh, and the second is proof that it's really 3.6 as opposed to the stock 3.9 Magnuson.
All I need now is the intake and the tune and I'm all set.
#37
I Have No Life
Thread Starter
#39
I Have No Life
Thread Starter
Update:
Got notified from jdm today that my intake shipped yesterday! Should be coming to me Monday! Timing is good since I'm off Monday and Tuesday for install time
Also, jdm wants me to verify my strategy code for them before they send me my new tune. I'll do that when I get back in town Saturday.
Got notified from jdm today that my intake shipped yesterday! Should be coming to me Monday! Timing is good since I'm off Monday and Tuesday for install time
Also, jdm wants me to verify my strategy code for them before they send me my new tune. I'll do that when I get back in town Saturday.
#40
Roush Forum Stalker
Update:
Got notified from jdm today that my intake shipped yesterday! Should be coming to me Monday! Timing is good since I'm off Monday and Tuesday for install time
Also, jdm wants me to verify my strategy code for them before they send me my new tune. I'll do that when I get back in town Saturday.
Got notified from jdm today that my intake shipped yesterday! Should be coming to me Monday! Timing is good since I'm off Monday and Tuesday for install time
Also, jdm wants me to verify my strategy code for them before they send me my new tune. I'll do that when I get back in town Saturday.