Halibrand Twisted Special
Bullitt Member
Joined: December 15, 2005
Posts: 318
Likes: 0
I will have pricing on the kit in a few days. Look at www.wheelznmore.com to see pricing when available. All parts are ready. Looks like the tail lights will not happen at this time. Trying to get someone to manufacture them is a nightmare. I know before I get hammered about the time it has taken to long to get to market. Long story not enough time in the day to cover it all. I will be selling the kit in parts and complete. Also look for us at www.steedamidwest.com we will be open in days. Steeda has come to the mid-west. Thanks guys and gals for being patient.
Rick
Rick
Bullitt Member
Joined: December 15, 2005
Posts: 318
Likes: 0
I looks like the kit is going to come in a hair under $3750.00 complete I know this may look high.
Here are the parts to the kit:
Front Section: Hood, Headlight Section, Bumper, Sealed Beam Hella lights, 2 Billet Grills. (We are not looking at providing the small lights at this time, as they are available all over the market. The holes are made to fit the PIAA lamp). Attaching hardware is the factory pieces and a few extra nuts and bolts.
Mid Section: Upper Scoops, Lower Scoops (These will not extend onto the door as the prototypes did. They will end at the door jam edge.) Also Side Skirt Exhaust. We are currently working with a manufacture to get this done in stainless as well as aluminized.
Tail Section: 3-piece Flip Spoiler (looks similar to the 69-70 Shelby tail). The taillights have been a nightmare to source a reputable LED manufacturer that can make them work from year to year and not look like LED’s. We are still trying to find someone but no luck yet.
The only portion of the kit that is going to have to be truck freight is the hood. Everything else can be shipped UPS or Fedex.
The one part of the kit that can’t be broken up and sold seriate is the front section. As you all know we stretched the hood almost 8 inches over the stock one and also the front bumper headlight section are stretched. We are looking at being able to start shipping any day now. We just need for the grills to come in so we can precede forward with shipping. We can sell the front-end as a stripped down model and you can get you own headlights and modify grills that are on the market already. We can provide you with the part numbers that we used to put the SEMA project together. Then you don’t have to set and wait on us to have a snap together kit.
I’ll keep posting stuff here as it comes to market. Also I’ll look into seeing if the Mods will let me start a new thread on this TWISTED Body Kit.
You can see the production nose in the attachment. We have made it two-piece (upper and lower) for ease of instillation.
Thanks for your overwhelming patience
Rick (TRQ QTRHRSE)
Here are the parts to the kit:
Front Section: Hood, Headlight Section, Bumper, Sealed Beam Hella lights, 2 Billet Grills. (We are not looking at providing the small lights at this time, as they are available all over the market. The holes are made to fit the PIAA lamp). Attaching hardware is the factory pieces and a few extra nuts and bolts.
Mid Section: Upper Scoops, Lower Scoops (These will not extend onto the door as the prototypes did. They will end at the door jam edge.) Also Side Skirt Exhaust. We are currently working with a manufacture to get this done in stainless as well as aluminized.
Tail Section: 3-piece Flip Spoiler (looks similar to the 69-70 Shelby tail). The taillights have been a nightmare to source a reputable LED manufacturer that can make them work from year to year and not look like LED’s. We are still trying to find someone but no luck yet.
The only portion of the kit that is going to have to be truck freight is the hood. Everything else can be shipped UPS or Fedex.
The one part of the kit that can’t be broken up and sold seriate is the front section. As you all know we stretched the hood almost 8 inches over the stock one and also the front bumper headlight section are stretched. We are looking at being able to start shipping any day now. We just need for the grills to come in so we can precede forward with shipping. We can sell the front-end as a stripped down model and you can get you own headlights and modify grills that are on the market already. We can provide you with the part numbers that we used to put the SEMA project together. Then you don’t have to set and wait on us to have a snap together kit.
I’ll keep posting stuff here as it comes to market. Also I’ll look into seeing if the Mods will let me start a new thread on this TWISTED Body Kit.
You can see the production nose in the attachment. We have made it two-piece (upper and lower) for ease of instillation.
Thanks for your overwhelming patience
Rick (TRQ QTRHRSE)
Mach 1 Member
Joined: April 27, 2004
Posts: 551
Likes: 0
Please send me the price on the front end components. I really just need a price for the bumper pieces and the hood. Also, is there any chance of offering a hood without the "bulge"? Maybe just a flat stock hood. Thanks for your help.
Bullitt Member
Joined: December 15, 2005
Posts: 318
Likes: 0
SSCOBRA your looking at $950.00 for the front set plus the freight. This would be the hood, headlight section and lower bumper. This price is for this group of components only. We would provide you with the part numbers for the Hella lights and the two billet grills for the car. It is really an easy install. Simple mods to the grills you have to order. Shaving the edges down is what it amounts to. I know this sounds like a cop out on our part but you could get the parts faster. It is totally up to you. Also at this time we’re not looking at doing a flat hood.
I'd love that hood if you could somehow make it work with the Shelby front bumper. What's the pricing on the spoiler and how is it held on? Do you have any pics of the spoiler off the car?
