"What I wish they made" thread...
#121
Cobra Member
Join Date: January 12, 2006
Location: Houston, Texas
Posts: 1,163
Likes: 0
Received 0 Likes
on
0 Posts
what they should have done on the S197
1. Hips
2. Working guages
3. Less easily scuffing interior pieces
4. Headlights w/o plastic piece covering the headlight bulb,like this:
5.Suspension with less wheel-hop and smoother ride.
1. Hips
2. Working guages
3. Less easily scuffing interior pieces
4. Headlights w/o plastic piece covering the headlight bulb,like this:
5.Suspension with less wheel-hop and smoother ride.
#123
Or maybe you could use the holes to bolt a keg to your trunk?
4. I agree, would look very retro...but the way our lights are recessed so far back, it would cause some ugly drag. Plus you'd be cleaning bugs out of the cracks all the time. With the lense, you just wipe'em off. Besides, if you keep the lense clean, it's almost as good.
#124
I've been thinking about this one. What if we had a system like the 1970 Chevelles had where a couple of flaps opened at the back of the hood, giving a cowl induction type effect? If there was a way to fit it into the cowl panel, we wouldn't even have to cut up the hood to make it work.
#126
Former Vendor
Thread Starter
Join Date: January 11, 2007
Location: Aston, PA
Posts: 2,594
Likes: 0
Received 0 Likes
on
0 Posts
Headlight splitters.... show me a picture of a rendering or something. I was thinking about this before but couldn't think of anything good looking.
#129
My picks:
1) integrated antenna into windshield or rear window
2) full ipod integration
3) steering wheel audio controls (possibly coming in '08?)
4) fogless GT mesh grill
5) less expensive HIDs (cheaper than $800)
6) 17 x 10s for the rear
9) overhead console to mount radar detector, sunglasses, etc
10) Aluminum hood with ram air or cowl induction
1) integrated antenna into windshield or rear window
2) full ipod integration
3) steering wheel audio controls (possibly coming in '08?)
4) fogless GT mesh grill
5) less expensive HIDs (cheaper than $800)
6) 17 x 10s for the rear
9) overhead console to mount radar detector, sunglasses, etc
10) Aluminum hood with ram air or cowl induction
#130
GTR Member
I've been thinking about this one. What if we had a system like the 1970 Chevelles had where a couple of flaps opened at the back of the hood, giving a cowl induction type effect? If there was a way to fit it into the cowl panel, we wouldn't even have to cut up the hood to make it work.
#132
I've been thinking about this one. What if we had a system like the 1970 Chevelles had where a couple of flaps opened at the back of the hood, giving a cowl induction type effect? If there was a way to fit it into the cowl panel, we wouldn't even have to cut up the hood to make it work.
Any pics of this on a Chevelle?
#134
Sorry, no direct link. Scroll down about half-way. You'll see-em. (Page search for splitters might work, too.)
Besides, there's always the trunk.
#135
I lust for a M24
Join Date: November 6, 2004
Location: Football HOF, Canton OH
Posts: 7,045
Likes: 0
Received 4 Likes
on
4 Posts
What'd'ya need belts for the kid for? Ain't the G forces enough? Besides, it's never too early to learn those ever-so-important survival skills. Don't worry, yer kid'll figure it out. A few sweeps around the cockpit and he'll be holding on like passengers in an Albanian taxi cab...
Besides, there's always the trunk.
Besides, there's always the trunk.
(Whew - all in one breath)
The splitters in that link are the 3dCarbon ones that aren't framed.
As far as the splitters, it'd be even better if they were framed and integrated with or on top of a headlight blackout panel. What I hope to be able to do is hide the headlamp a little bit, giving it the look of a 70 Boss.
#136
Nah, don't try to copy the Boss. Rumor has it, Ford is pushing out a Boss edition in '08. Wouldn't want to play like a ricer and try to fake it!
Ditto on the kid thing, btw. I wish irresponsible parenting was a capital offense. My folks never let me ride around without a seatbelt, and you can't tell me they were "too busy" to make sure of it! In addition to the fine, the cop should take the kid.
Ditto on the kid thing, btw. I wish irresponsible parenting was a capital offense. My folks never let me ride around without a seatbelt, and you can't tell me they were "too busy" to make sure of it! In addition to the fine, the cop should take the kid.
#137
I lust for a M24
Join Date: November 6, 2004
Location: Football HOF, Canton OH
Posts: 7,045
Likes: 0
Received 4 Likes
on
4 Posts
It's not just a Boss that had that style, I was just using that for reference. And a Mustang looking like a Boss, an American Muscle Car Icon, is the farthest thing from rice I can think of.
#139
agreed. i dont really like any of the aftermarket front ends. but the gt500 kinda deal would be cool.
#140
Former Vendor
Thread Starter
Join Date: January 11, 2007
Location: Aston, PA
Posts: 2,594
Likes: 0
Received 0 Likes
on
0 Posts
The GT500 front end IMO is probably one of the nicest looking Mustangs ever made. Its in the top 3, at least! The body stuff is fun to work with. Let me see what I can mock up.
CR
Tillman Speed
CR
Tillman Speed