LEO_06GT

First of congrats on the new mods. Like Bill said it was a hollow/clanking/clunking/banging type sound. Not really sure how to describe it. All I know was I didn't have that with the stock panhard bar and I don't have it now with the steeda after filling it with sand.

BTW-My rear end is off to a bit towards the passenger side. I was hoping to not have to tinker with it anymore.

TacoBill

Did you try repositioning yourself on the seat?


I thought we measured 0.700" on each side with the plumb line when it was on the ramps?

TacoBill

Tom1 & 2- Are you guys running an oil seperator or catch can?

And for Tom1 specifically, did you run either when you had the Vortech?

89Trooper

Have I been demoted to Tom2??

I do not have an oil seperator or catch can... where would I need one?

The turbo pulls oil from the location of the oil pressure sensor (tee installed) and dumps back into the location of the oil level sensor (tee installed).

tom281

hahaha, do that and you'll be naturally aspirated, if you know what I mean

Nope, although I have considered it. But from looking at my intake and t-body, I don't have alot of blowby.

Appropriately so......




just kidding

LEO_06GT

Just scheduled a service appointment at the dealership to have the recall work done as well has have my shaker 1000 hu replaced because of cd's skipping. I'm hoping that when they swap it out I get one of the new 08 HU that have the chrome bezels. I'm taking it in Friday morning and they said I should have the car back by early afternoon. I'm going to remove the center console and sail panels for them as I don't want them scratching anything up.

TacoBill

Oops, sorry Tom, meant to put a 2.

The majority feels the need for an oil seperator when going FI. Whenther that applies to S/C's only, I dunno.



Have you talked to Brent or Seth about this? Just curious what their take is on all this.



I'm guessing that you'll get an old (but new) deck. Doesn't really matter though as I see the D3 in your future.

Good thinking on doing the prep work for the Dealer mechanics. You don't want your leather e-brake to get scuffed.

USMC0341

Hey guys, after we go to SEMA this year we "NEED" to go here........

http://www.hofbrauhauslasvegas.com

LEO_06GT

Atleast let me hope for a new deck.

kh765

That does sound like something Tom....2 would say.

NYNY53

Hey George, nice to hear from you again.................Where ya been

George is always looking out for you SoCal guys, he's got your back

kh765

Thanks for the compliments guys!

I hope that's the problem with mine. I just started noticing it recently. It doesn't seem to happen over smooth road, just on rough surfaces like all the stupid speed bumps in my complex.

I have had to adjust my PHB a couple of times too. After my new wheels were on, it was pretty far off again.

USMC0341

just working and sleeping Trying to keep up with you guys

NYNY53

OK guys, help me out

When I look at the bottom of the thread it lists who's viewing the thread, why is there a + after your screen name? I know, behind the times as always.

kh765

I don't see any plus....are you seeing things again Phil?

NYNY53

And I bet Ray is out looking for more video's for us to watch, always got our best interests in mind Ray

NYNY53

Could be

Here is how you show up kh765+

Actually here is how it looks right now, looks like Ice and I are + free

NYNY53, Iceknyght, kh765+, LEO_06GT+, Ray Man+, TacoBill+, USMC0341+

LEO_06GT

Yup that's the only time I'd hear mine was over bumps and potholes. On smooth roads I didn't have a problem.

LEO_06GT

That's because the people with + are on your buddylist. Makes it easier to find your friends when your looking at the who's on the forum page.

NYNY53

Ahhh, I just added you all to my buddy list, duh

thanks Leo