Ponies on The Run!
GTR Member
Joined: January 26, 2006
Posts: 4,639
Likes: 0
From: Central Florida
Ordered this morning...
MMR Street Mod 800 Shortblock (up to 800HP)
No delivery, I'll be picking it up.
$4391.84 OTD Price
MMR Street Mod 800 Shortblock (up to 800HP)
- New Ford Aluminum Block
- New 4340 Forged Cobra Crankshaft
- 4340 Forged H-Beam Rods w/ARP bolts
- Forged Manley Pistons (9.0:1)
- Speed Pro Rings
- Ceramic/Teflon Coating (for pistons)
- Clevite and ACL Bearings
- ARP Main Studs
No delivery, I'll be picking it up.
$4391.84 OTD Price
That engine has no HP rating (yet). It's what it can handle. Bill's S/C kit on that engine and on his stock engine will produce the same HP. Actually - a little less since the compression ratio on our stock engines is 9.8:1. However - he can safely up the boost without any worries to gain back that HP loss.
Last edited by 89Trooper; Apr 25, 2008 at 01:37 PM.
Price is fully assembled.. now I pray that my heads are good.
Stop suggesting things Leo.
That engine has no HP rating (yet). It's what it can handle. Bill's S/C kit on that engine and on his stock engine will produce the same HP. Actually - a little less since the compression ratio on our stock engines is 9.8:1. However - he can safely up the boost without any worries to gain back that HP loss.
Legacy TMS Member
Joined: July 29, 2004
Posts: 1,529
Likes: 5
From: SoCal
Ray... Thanks for having us, it was a beautiful service.
Jed.... Great pics, Great time with the crew as usual
Bill..... Congrats on the engine, the stang will be on the road soon!
I really like those magnum style rims Tom! Should look great!
Jed.... Great pics, Great time with the crew as usual
Bill..... Congrats on the engine, the stang will be on the road soon!
I really like those magnum style rims Tom! Should look great!
Bullitt Member
Joined: October 8, 2007
Posts: 336
Likes: 0
That engine has no HP rating (yet). It's what it can handle. Bill's S/C kit on that engine and on his stock engine will produce the same HP. Actually - a little less since the compression ratio on our stock engines is 9.8:1. However - he can safely up the boost without any worries to gain back that HP loss.
Shelby GT500 Member
Joined: November 22, 2006
Posts: 2,932
Likes: 0
From: Planet Earth
Ordered this morning...
MMR Street Mod 800 Shortblock (up to 800HP)
No delivery, I'll be picking it up.
$4391.84 OTD Price
MMR Street Mod 800 Shortblock (up to 800HP)
- New Ford Aluminum Block
- New 4340 Forged Cobra Crankshaft
- 4340 Forged H-Beam Rods w/ARP bolts
- Forged Manley Pistons (9.0:1)
- Speed Pro Rings
- Ceramic/Teflon Coating (for pistons)
- Clevite and ACL Bearings
- ARP Main Studs
No delivery, I'll be picking it up.
$4391.84 OTD Price
Muhahaha!
Who makes the rods, just curious I'm sure they are top notch.
Are you going to replace the flywheel and clutch assembly w/ (Spec, Centerforce?) while the "chest is open" 
If your heads are okay have you considered port & polish? EZ HP gain! I think the wild card here is the condition of the heads. A good a amount of cost and decisions ride on their condition. Think + Jed
Honestly, I don't know.. but they HAVE to be better than the POS sand cast skinny rods that are in there now. Those things snapped like wooden chopsticks!
Are you going to replace the flywheel and clutch assembly w/ (Spec, Centerforce?) while the "chest is open" If your heads are okay have you considered port & polish? EZ HP gain! I think the wild card here is the condition of the heads. A good a amount of cost and decisions ride on their condition. Think +
If your heads are okay have you considered port & polish? EZ HP gain! I think the wild card here is the condition of the heads. A good a amount of cost and decisions ride on their condition. Think +
Legacy TMS Member
Joined: May 24, 2006
Posts: 7,409
Likes: 0
From: San Diego
Considering getting one mainly because the price sounds good.
http://forums.bradbarnett.net/showth...13#post5556313
What do you think?
http://forums.bradbarnett.net/showth...13#post5556313
What do you think?
Legacy TMS Member
Joined: May 24, 2006
Posts: 7,409
Likes: 0
From: San Diego
Oh Luis.
http://forums.bradbarnett.net/showthread.php?t=467149
If this dude had posted this before I got my tires I'd be all over it. Especially after seeing Brians setup.
Where the ----- is everybody? Looks like I'm home alone.
http://forums.bradbarnett.net/showthread.php?t=467149
If this dude had posted this before I got my tires I'd be all over it. Especially after seeing Brians setup.
Where the ----- is everybody? Looks like I'm home alone.
Legacy TMS Member
Joined: November 4, 2005
Posts: 953
Likes: 13
From: Central FL
Ordered this morning...
MMR Street Mod 800 Shortblock (up to 800HP)
No delivery, I'll be picking it up.
$4391.84 OTD Price
MMR Street Mod 800 Shortblock (up to 800HP)
- New Ford Aluminum Block
- New 4340 Forged Cobra Crankshaft
- 4340 Forged H-Beam Rods w/ARP bolts
- Forged Manley Pistons (9.0:1)
- Speed Pro Rings
- Ceramic/Teflon Coating (for pistons)
- Clevite and ACL Bearings
- ARP Main Studs
No delivery, I'll be picking it up.
$4391.84 OTD Price
Cobra Member
Joined: May 17, 2007
Posts: 1,201
Likes: 0
From: Texa$
I'd definitely consider the headers shorty or long tube, while you have the engine out. Jed brings up a good point on the flywheel and clutch. Mights as well do it right Bill. money bags Bill that is.
Considering getting one mainly because the price sounds good.
http://forums.bradbarnett.net/showth...13#post5556313
What do you think?
http://forums.bradbarnett.net/showth...13#post5556313
What do you think?
I put this mod along with the ambient lighting (sorry Luis
).Leo trying to start some sh*t..
Well, if not for my recent incident, I'd be rollin' on chrome 20's right about now!
Speaking clutches, reading some bad stuff on Spec 2+ clutches on another forum.
Maybe Centerforce is the way to go?
Legacy TMS Member
Joined: May 24, 2006
Posts: 7,409
Likes: 0
From: San Diego