Ponies on The Run!
Bullitt Member
Joined: October 8, 2007
Posts: 336
Likes: 0
I don't know what to say either. Lots of ideas ran thru my mind on how all this happened. Too lean? But does that cause and engine to go poof? 
I sent Brent (over at Brenspeed) an e-mail explaining the whole thing up to today's finding and he replied saying to get that BAP on asap, because of the power levels of this kit/tune, it needs it.
Obviously too late, but I thought if the car were to run lean, it would result in detonation and if sustained, can burn holes in pistons... not explode the rods and such.
Could be that things were ready to 'go' from all the rev limiter bounces and flogging I've done to it? Then, once a little boost was introduced, that was the straw that broke it?
This whole thing is full of question marks.
In the coming days, I'll be checking on prices for FRPP crate engines, rebuilds, Livernois short rolling block ($$$), etc.
It all boils down to money for me; economical (aka. cast) or forged. This is what I have to decide on first, then explore my options.
I sent Brent (over at Brenspeed) an e-mail explaining the whole thing up to today's finding and he replied saying to get that BAP on asap, because of the power levels of this kit/tune, it needs it.
Obviously too late, but I thought if the car were to run lean, it would result in detonation and if sustained, can burn holes in pistons... not explode the rods and such.
Could be that things were ready to 'go' from all the rev limiter bounces and flogging I've done to it? Then, once a little boost was introduced, that was the straw that broke it?
This whole thing is full of question marks.
In the coming days, I'll be checking on prices for FRPP crate engines, rebuilds, Livernois short rolling block ($$$), etc.
It all boils down to money for me; economical (aka. cast) or forged. This is what I have to decide on first, then explore my options.
Team Mustang Source
Joined: September 14, 2005
Posts: 3,477
Likes: 1
From: SoCal
Why ?? Is there something that they don't do that the other Mfgs do ??
I'm not a proponent just curious. I hadn't heard of them before and after Bill mentioned them look at their site and it seemed like they knew what they were doing.
BAP business ?? Well conventional wisdom would state that you can't get what Tom is getting out of the stock pump. I have no freaking idea, so I stay out of that altogether.
I'm not a proponent just curious. I hadn't heard of them before and after Bill mentioned them look at their site and it seemed like they knew what they were doing.
BAP business ?? Well conventional wisdom would state that you can't get what Tom is getting out of the stock pump. I have no freaking idea, so I stay out of that altogether.
Team Mustang Source
Joined: September 14, 2005
Posts: 3,477
Likes: 1
From: SoCal
Shelby GT500 Member
Joined: November 22, 2006
Posts: 2,932
Likes: 0
From: Planet Earth
Well finally some good news. Spark plug was removed successfully. He's testing pressure overnight to make sure the leak the car had is fixed. Car was dyno tuned today. Tomorrow go in guages and rechecking everything. Saturday pick-up. I'm curious to see what he's achieved powerwise.
He also said he has a GT500 fuel pump that came in with another kit of his and wont need it. He said he might be able to cut me a real good deal on it since he'll have no use for it. So I may also come ahead with a nice fuel pump sometime in the future. We'll see how that goes.
He also said he has a GT500 fuel pump that came in with another kit of his and wont need it. He said he might be able to cut me a real good deal on it since he'll have no use for it. So I may also come ahead with a nice fuel pump sometime in the future. We'll see how that goes.
maybe even a vid?jed
Shelby GT500 Member
Joined: November 22, 2006
Posts: 2,932
Likes: 0
From: Planet Earth
Tribute to Ray wife
We started our day with our own salute 
After a cruise to Pasadena we met George and Brian...
The grounds here are very senic it's a Catholic girls school
Here's the SoCal guy's trying not to think about forged internals
Ray talking about living life and enjoying it, maybe an SC isn't so far away
This singer did a fantastic ballad from the Beatles Couldn't remember the song tile DOH!
The SoCal group after the ceremony...with our new bud Ian!
Checkout Ray's wedding photo, I was the best man. I was a handsome S _ _ t back then
Luis was caught trying to make the move on two Catholic girls
Okay Luis 20 hail Mary's each 
After we left we went to Woodranch for some BBQ
Looked like we went to Italy.
TacoBill's Combo Tri Tip & Pork Ribs
Brian and his burger...
Then we hit the super slab and found our way home...
Link to More
After a cruise to Pasadena we met George and Brian...
The grounds here are very senic it's a Catholic girls school
Here's the SoCal guy's trying not to think about forged internals
Ray talking about living life and enjoying it, maybe an SC isn't so far away
This singer did a fantastic ballad from the Beatles
Couldn't remember the song tile DOH!The SoCal group after the ceremony...with our new bud Ian!
Checkout Ray's wedding photo, I was the best man. I was a handsome S _ _ t back then
Luis was caught trying to make the move on two Catholic girls
Okay Luis 20 hail Mary's each After we left we went to Woodranch for some BBQ
Looked like we went to Italy.TacoBill's Combo Tri Tip & Pork Ribs
Brian and his burger...
Then we hit the super slab and found our way home...
Link to More
Last edited by JedCranium; Apr 25, 2008 at 08:20 AM.
Bullitt Member
Joined: September 2, 2007
Posts: 366
Likes: 0
From: Ladera Ranch, CA.
Those are some really nice pictures Jed. Ashley & I almost made it out with Ian but I had an Anthropology Lab course to make this evening. Looks like you all made the most of a great day.
Last edited by TheDarkKnight; Apr 25, 2008 at 01:26 AM.
Shelby GT350 Member
Joined: April 9, 2007
Posts: 2,463
Likes: 0
From: Ellenton, FL
And of even more mods then I did last year!
Ray, my condolances
GTR Member
Joined: January 26, 2006
Posts: 4,639
Likes: 0
From: Central Florida
Not against them... just don't see why one is necessary for me. Plus, I'm down to 8 psi now, so the demand is even less.
Last edited by 89Trooper; Apr 25, 2008 at 05:45 AM.
Cobra Member
Joined: May 17, 2007
Posts: 1,201
Likes: 0
From: Texa$
Ray it looks like it was a lovely service. What a great thing to honor your wife the way you did. It speaks to great lengths what a good man you are Ray.
It also speaks volumes as to what great friends and supporters you have Ray. Its extremely nice for Bill, Brian George, Jed and Luis to attend and support you in your time of celebration of life for Marianne. Also know you had friends and supporters throughout this country with you in thoughts and prayers during your service, I know I was there with you!
Thanks Jed for the glimpse to the past with the wedding pictures. You and Ray were studs, look at that black hair. Looks like times has been good to both of you.
It also speaks volumes as to what great friends and supporters you have Ray. Its extremely nice for Bill, Brian George, Jed and Luis to attend and support you in your time of celebration of life for Marianne. Also know you had friends and supporters throughout this country with you in thoughts and prayers during your service, I know I was there with you!
Thanks Jed for the glimpse to the past with the wedding pictures. You and Ray were studs, look at that black hair. Looks like times has been good to both of you.
Cobra Member
Joined: May 17, 2007
Posts: 1,201
Likes: 0
From: Texa$
Give us more than that Turbo..
Brenspeed e-mailed tune.
Yes I know.
Assume the position Luis..
18x9 should allow you to run 275's.
Cobra Member
Joined: March 3, 2007
Posts: 1,186
Likes: 0
From: Eden Prairie, MN
the slings and arrows of the outrageous mod bug
I have always thought though rims were very good looking, especially for the Mach theme!
Last edited by officespace56; Apr 25, 2008 at 08:02 AM.
Legacy TMS Member
Joined: May 24, 2006
Posts: 7,409
Likes: 0
From: San Diego
Ray- Sorry I couldn't make it down. Looks like you had plenty of support their though. The pic of Jed and you on your wedding day was hillarious.
Jed-Awesome pics.
Tom-JMO but I like the look of these better. Only negative is that they only have them in 17x9's unless you go with the 99-04 wheels. I think you'll need a spacer though.
http://www.americanmuscle.com/17x9-2...inedblack.html
Jed-Awesome pics.
Tom-JMO but I like the look of these better. Only negative is that they only have them in 17x9's unless you go with the 99-04 wheels. I think you'll need a spacer though.
http://www.americanmuscle.com/17x9-2...inedblack.html
Legacy TMS Member
Joined: May 24, 2006
Posts: 7,409
Likes: 0
From: San Diego
Caption contest
We should've gotten black stangs.
Good Evening, I'm Chris Hansen with dateline NBC.....
Seven-up, Bud Light, Sexy foot??
Last edited by LEO_06GT; Apr 25, 2008 at 08:13 AM.
Team Mustang Source
Joined: September 14, 2005
Posts: 3,477
Likes: 1
From: SoCal
Ray- Sorry I couldn't make it down. Looks like you had plenty of support their though. The pic of Jed and you on your wedding day was hillarious.
Jed-Awesome pics.
Tom-JMO but I like the look of these better. Only negative is that they only have them in 17x9's unless you go with the 99-04 wheels. I think you'll need a spacer though.
http://www.americanmuscle.com/17x9-2...inedblack.html
Jed-Awesome pics.
Tom-JMO but I like the look of these better. Only negative is that they only have them in 17x9's unless you go with the 99-04 wheels. I think you'll need a spacer though.
http://www.americanmuscle.com/17x9-2...inedblack.html
Another wheel that is close, but unique, is the "HotWheels" SixtyEight wheel
and I know I've seen the inner portion painted before, just don't know where at the moment.
Bullitt Member
Joined: October 8, 2007
Posts: 336
Likes: 0
Why ?? Is there something that they don't do that the other Mfgs do ??
I'm not a proponent just curious. I hadn't heard of them before and after Bill mentioned them look at their site and it seemed like they knew what they were doing.
BAP business ?? Well conventional wisdom would state that you can't get what Tom is getting out of the stock pump. I have no freaking idea, so I stay out of that altogether.
I'm not a proponent just curious. I hadn't heard of them before and after Bill mentioned them look at their site and it seemed like they knew what they were doing.
BAP business ?? Well conventional wisdom would state that you can't get what Tom is getting out of the stock pump. I have no freaking idea, so I stay out of that altogether.
