Hi Cody, good luck with the move and stuff.

 

I went with 18x9's with 255/45's all around, car handles great with this combo. I have some 14" Baer Eradispeed rotors sitting here that will be going on the car Tuesday afternoon. They aren't drilled or slotted though, just plain. It will make a nice improvement in the brakes though. My stock rotors are warped already with 22k on them.

Nice exhaust Scott! Post up a sound clip when they're on the car.

 

I'm surprised at the rotors being warped. I took mine off after 22k and 2 road track days and about 40-50 runs down the 1/4 and they were pretty smooth still. Just had em resurfaced at work the other day and will set aside in case I ever need to put them back on.

But your car is lookin hot!

 

'morning, ladies!

 

Morning Kid Check your diaper yet this morning? Don't worry you will graduate to Depends some day.

 

Mornin' Another crappy day in the Midwest.

 

Howdy All


Question for the day. Does anybody run a water temp gauge and if you do what does it read at normal operating temps.? I set my Tuner to kick on at 180 Hi and my gauge nevers goes above that mark. Do I need to let the engine get warmer for a bit more HP or what??

Also its grey and rainee here , they are calling for a light snow tonight.

 

Hey Darrell,
I have the Aeroforce scan gauges so I am reading the sensors that the computer sees. I have changed nothing that would effect the water temp. and mine runs 190 when fully warmed up and cruising.
Scott

 

Cool thanks Scott. I'll think I'll up mine to 190. Also has anybody seem a Moblie mount for a Camcorder??

 

STANGSTOCK 2008 : Main Event, 70MACH1OWNER vs ShaftMaster in a no holds bared, Mens Speedo mud wrestling contest ......... I'm Sorry !....not....

 

Check you PM my friend!!

 

Darrell, my car runs between 190 to 192 using the Aeroforce guages.

 

Okay guys I have put the Magnaflows on today and I am in love with the change so for. I don't want to type this twice so here is a link to a new thread. Hey Larry...I think I have just cost you another $400 bucks. I have only driven it 5 miles but listen to the vids. It is day and night!!! And there is zero drone with this set up. Which is OBX longtubes and H-pipe and Magnaflow mufflers.
Scott

http://forums.bradbarnett.net/showth...22#post5548522

 

Check out my new exhaust thread.. A little 3M tape and duct tape can work miracles.
Scott

http://forums.bradbarnett.net/showth...22#post5548522

 

.... What ?..

 

Trying again!!! ??????

 

I use tie straps to the passenger headrest

 

What about one of these??
http://www.bestbuy.com/site/olspage....=1176506228750

or this

http://www.raceoptics.com/suctioncup...a394fe5e4e92d2

 

Hey Darrell
Those are nice and would have worked great. I have a roll of 3M automovtive tape for years and that is the best holding stuff around.

Morning everyone else Another poopy day of weather I see.

 

Good luck on the move Cody!