Bold Moves Mustang Club of Tulsa
4/19/07, 12:56 PM
#2421
Thread Starter
Join Date: September 19, 2005
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
Just got off the phone with Randy. I was in the middle of typing him an email, and he just happened to call... now that's a good b#$ch! 
Anywho, He ran into a problem with the shirt design.... To have the BHF logo on the sleeve would be rather costly and time consuming... Sooooo... I told him to just move it under our logo on the back. No sweat. He calling the t-shirt dude right now, and they should print this afternoon or tomorrow! I 'll keep ya posted.
Anywho, He ran into a problem with the shirt design.... To have the BHF logo on the sleeve would be rather costly and time consuming... Sooooo... I told him to just move it under our logo on the back. No sweat. He calling the t-shirt dude right now, and they should print this afternoon or tomorrow! I 'll keep ya posted.
4/19/07, 01:02 PM
#2422
T-shirts? You mean were finally going to have t-shirts? You really do know how to train em Paul! Good Paulie! Good Paulie!
4/19/07, 01:04 PM
#2423
Thread Starter
Join Date: September 19, 2005
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
Wroof!
4/19/07, 01:05 PM
#2424
If our logo and his logo are on the back, what's on the front?
4/19/07, 01:13 PM
#2425
Thread Starter
Join Date: September 19, 2005
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
Our logo... Small (3-4 inches) on the left side.
4/19/07, 01:17 PM
#2426
Thread Starter
Join Date: September 19, 2005
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
I can't lie... I made a last second change. It a pic of Bob mooning the world...
4/19/07, 01:32 PM
#2427
4/19/07, 01:36 PM
#2428
This is the bs that just wont end, it just goes on and on my friends, randy at bob hurley said he would get us shirts to help promote the club, but to this day we've got nothing more than just a bunch of bunk. this is the bs that just wont end.....
4/19/07, 01:46 PM
#2429
Thread Starter
Join Date: September 19, 2005
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
Nope… this is much different. Before we’d have to call and ask him the status… To which he would reply the printer is working on it. Now, he calls US to say the printer is working on it. Big difference! We’re making progress my friends! J
4/19/07, 01:54 PM
#2430
Thread Starter
Join Date: September 19, 2005
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
Yo Jeff... Dod you still have that Saleen Shifter kit you wanna get rid of??
4/19/07, 05:33 PM
#2431
Well guys I can't make it over to Pauls tonight I just have too much to do cleaning wise to the car before saturday. It's bad enough that I am gonna clean it then drag it then have to clean it again.
4/19/07, 05:35 PM
#2432
Chris are you going to the drags on Fri. night? Hope everyone can attend including you sergeant bling. Also Chris I'm not sure if you got the e-mail or not but saturday is a big car show in Mustang Ok. Myself and the sergeant of bling should be there if you would like to go.
4/19/07, 06:41 PM
#2433
yes i plan on going tomorrow night to the drags but i can't make it for the car show in mustang unfortuantely i have work. what time are you heading out there tomorrow david?
4/19/07, 07:07 PM
#2434
I hope to be in line around 5:45 or so at the track. I might get there earlier to let my car begin cooling down so I can get a run in faster.
4/20/07, 07:48 AM
#2435
Thread Starter
Join Date: September 19, 2005
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
Jeff Hensley will Race in Friday’s Big Race…
Tulsa, Ok- As reported earlier in the week,Jeff was questionable for the race to be held this evening at Tulsa Raceway Park.Sources are now reporting that Jeff Hensley will race in Friday’s race.
The issue all started when Jeff installed a new race drive shaft. Much to his surprise this new part caused a severe vibration at high speed and jeopardized Jeff’s run at the championship. It had to be fixed or replaced.
The change in status came late last night and in a turn of events, it was all due to his friend but racing nemesis, Paul Haines the current undisputed champion. Working late into the night (11pm ish) they were able to remove and replace the part and get Jeff’s car up and running again.
While neither of them would provide much in the way details, the often outspoken Paul did say, “You know… Everyone needs a nemesis. It provides motivation. Bush had Saddam. Ali had Foreman, Jane Pauly has Katie Couric. Jeff is my Katie Couric. If he doesn’t race, what’s the point?”
The race is scheduled for tonight at Tulsa Raceway Park. Gates open at 6pm.
Tulsa, Ok- As reported earlier in the week,Jeff was questionable for the race to be held this evening at Tulsa Raceway Park.Sources are now reporting that Jeff Hensley will race in Friday’s race.
The issue all started when Jeff installed a new race drive shaft. Much to his surprise this new part caused a severe vibration at high speed and jeopardized Jeff’s run at the championship. It had to be fixed or replaced.
The change in status came late last night and in a turn of events, it was all due to his friend but racing nemesis, Paul Haines the current undisputed champion. Working late into the night (11pm ish) they were able to remove and replace the part and get Jeff’s car up and running again.
While neither of them would provide much in the way details, the often outspoken Paul did say, “You know… Everyone needs a nemesis. It provides motivation. Bush had Saddam. Ali had Foreman, Jane Pauly has Katie Couric. Jeff is my Katie Couric. If he doesn’t race, what’s the point?”
The race is scheduled for tonight at Tulsa Raceway Park. Gates open at 6pm.
4/20/07, 07:59 AM
#2436
So I guess based on the Onion news report that the driveshaft had to come out and the old one went back in? Thats just crazy.
4/20/07, 08:03 AM
#2437
Weather reporting near 80 degrees for the start of racing action this evening. Everyone needs to be patient on their runs if you are looking for fast times. Let your cars cool way down before running. Don't idle in the staging lanes. While in the staging lanes run your heater at full blast to extract heat from the car as the heater core is a small radiator in effect. If your just looking to race then just race but don't cry on this forum when your car only goes 13.5
4/20/07, 01:12 PM
#2438
Thread Starter
Join Date: September 19, 2005
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
And make sure you empty your washer fluid for weight savings!
4/20/07, 01:44 PM
#2439
Aw..... just take a laxitive. And cut off your extra limbs and apendages.
4/20/07, 01:45 PM
#2440
Thread Starter
Join Date: September 19, 2005
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
Already did that! Ooh! TURTLE! Gotta go.