'06 Mach 1
10/3/04, 11:41 PM
#41
GT Member
Join Date: September 6, 2004
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 05mach1+October 3, 2004, 1:03 AM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (05mach1 @ October 3, 2004, 1:03 AM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-05mach1@October 2, 2004, 11:00 PM
Will I'll think the Mach1 will come back because the Mach1 it was bang for the buck
you had 305hp Or more B) and price was right at $28,000.00 with 32 value 8V
and out handle an 03-04 Cobras on track what I notice at Nashville Speedway at 40th
and see lot of them beat the GTs and Cobras on the dragrace aways. and most at one Mustang show at 40th Anniv Mustang show over 145 03-04 Mach1s showed up whole weekend that's tell me what people what back for SE, In mid 06.
Will I'll think the Mach1 will come back because the Mach1 it was bang for the buck
you had 305hp Or more B) and price was right at $28,000.00 with 32 value 8V
and out handle an 03-04 Cobras on track what I notice at Nashville Speedway at 40th
and see lot of them beat the GTs and Cobras on the dragrace aways. and most at one Mustang show at 40th Anniv Mustang show over 145 03-04 Mach1s showed up whole weekend that's tell me what people what back for SE, In mid 06.
I thought it looked more like a Boss
We may not know any specifics about the SE's just yet, but at least we can all be sure that there will be some sweet mustangs rolling out over these next years
Personally, I can't wait
10/4/04, 01:28 AM
#42
Banned
Join Date: September 23, 2004
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
i believe Ford has already stated that the Mach1 and the Bullitt will not be redone on the S197 platform and they will be looking to other namesakes and ideas for the special editions. you can quit dreaming about a Mach1/Bullitt, it's more than likely not going to happen.
10/4/04, 11:36 AM
#43
Bullitt Member
Join Date: October 4, 2004
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Tony Alonso+October 3, 2004, 11:22 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (Tony Alonso @ October 3, 2004, 11:22 PM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-Piston NV@October 3, 2004, 2:25 AM
As for Mach1 hopes, did anyone notice the "shaker like" indentation inside the hood? I saw it while watching the "Extreme Mustang" show on Discovery Channel. It was while they were preping the body, there is a complete front shot with the hood open --> check it out and tell me if you see what I saw. I immediately thought, Mach1!
As for Mach1 hopes, did anyone notice the "shaker like" indentation inside the hood? I saw it while watching the "Extreme Mustang" show on Discovery Channel. It was while they were preping the body, there is a complete front shot with the hood open --> check it out and tell me if you see what I saw. I immediately thought, Mach1!
Of course, this is all my speculation! [/b][/quote]
Agreed. In all likelihood any Shaker car would have a new hood, not a cut GT hood, so it would make so sense to make "cut here" lines in the GT hood.
It's probably for clearance and cooling.
But I really would like to see a S197 Mach I or Boss car with a Shaker...
Thread
Thread Starter
Forum
Replies
Last Post
Scothew
Curated Content Articles 71-73 Youtube & Photo Gallery
2
8/17/23 02:11 PM