Official 2013 part retrofit thread
4/19/13, 11:56 AM
#281
4/19/13, 12:44 PM
#282
Mach 1 Member
Thanks
LEXiiON
4/19/13, 01:03 PM
#283
GTR Member
Thread Starter
Tails are plug and play. You may have to re-pin or re-wire the lower harness that handles the license plate lights and rear side markers if you convert the rear fascia.
4/21/13, 10:28 PM
#284
seqentials work......plugs mate as expected, the isolator pad changed due to the curvature/shape of the new bumper cover, license wiring a bit tight but no problem as we ran it outside/off of oem retainer clips...call them what you like. you also need a oem plate that pops on around the license lights
i have to pull it off one more time to fit a new isolator due to leaving it out the 1st go around
Last edited by brembo12; 4/21/13 at 10:31 PM.
4/22/13, 01:53 AM
#286
Guys,
The purpose of this thread is to gauge interest and find out what parts from the '13 models everyone wants to put on their '10-12 cars. Obviously, there's a bit of time to wait before the resources will be made available, but my goal for this thread is to allow it to serve as a hub for all of this discussion. I will keep the first post updated with a listing of requests, and as things are deemed possible and/or completed, link to those threads.
Exterior:
-Rear taillamps & decklid blackout panel
-Heated side mirrors & pony projection lamps
-LED fog lights from '13 GT
-front end conversion (any style, includes hood)
-GT500 quad exhaust
-Headlamps
-GT/Boss hood vents
Interior:
-4.2" LCD display in gauges
-Recaro seats
Engine/Drivetrain:
-Cobra Jet intake
-Race/Track pack parts (Torsen, radiator, oil cooler)
-GT500 differential cooler
-GT500 Brembo 6-piston brakes
Suspension:
-GT500 Performance Pack electronically adjustable shocks/struts
NOTE: Anyone that can provide technical information, such as drawings, part numbers, etc. would be greatly appreciated!
The purpose of this thread is to gauge interest and find out what parts from the '13 models everyone wants to put on their '10-12 cars. Obviously, there's a bit of time to wait before the resources will be made available, but my goal for this thread is to allow it to serve as a hub for all of this discussion. I will keep the first post updated with a listing of requests, and as things are deemed possible and/or completed, link to those threads.
Exterior:
-Rear taillamps & decklid blackout panel
-Heated side mirrors & pony projection lamps
-LED fog lights from '13 GT
-front end conversion (any style, includes hood)
-GT500 quad exhaust
-Headlamps
-GT/Boss hood vents
Interior:
-4.2" LCD display in gauges
-Recaro seats
Engine/Drivetrain:
-Cobra Jet intake
-Race/Track pack parts (Torsen, radiator, oil cooler)
-GT500 differential cooler
-GT500 Brembo 6-piston brakes
Suspension:
-GT500 Performance Pack electronically adjustable shocks/struts
NOTE: Anyone that can provide technical information, such as drawings, part numbers, etc. would be greatly appreciated!
REAR FASCIA WITHOUT DIFFUSER: DR3Z-17K835-APTM $448.55
LICENSE PLATE SURROUND: DR3Z-17B390-AA $43.86 BUY A RTR!!! LOOKS BETTER!!!
GT500 LOWER BUMPER EXTENSION AKA DIFFUSER : DR3Z-17F828-AB $164.54
DR3Z-5230-L MUFFLER QUAD $222.39
DR3Z-5230-M MUFFLER QUAD $222.39
REFLECTORS LEFT/RIGHT
DR3Z*15A448*A $14.67
DR3Z*15A449*A $14.55
DR3Z17788A ISOLATOR $83.72 THE OLD WILL NOT WORK --- WE LEARNED THE HARD WAY.
3M8Z54310D12CAA FASTENER ISOLATOR RETAINERS $4.31 x 2 (REQUIRED/CAN REUSE OLD)
DR3Z16A550AB SHIELD - SPLASH - WH $20.89
DR3Z16A550AA SHIELD - SPLASH - WH $20.89
CONTRARY TO POPULAR BELIEF THE CONTOUR HAS CHANGED AT THE ATTACHMENT AREA WHERE THE REAR TIRE SPLASH SHIELDS ATTACH. THESE ARE LISTED WRONG ALL OVER THE PLACE...INCLUDING FORD DEALERS! 2012 WILL FIT BUT THE CUT OUT IS NOT THE CORRECT CONTOUR...MOST WOULD NOT NOTICE.
TRIM FOR LICENSE PLATE LIGHTING REQUIRED ESCUTCHEON TYPE/PLATE/SURROUND OEM FORD PART NUMBER UNKNOWN.
MISC SPARE FASTENERS --
QTY 8 W716460-s300
QTY 4 W716237-S300
QTY 2 W707291-S439
QTY 2 W705436-S300
Sorry about all the cap locks......tired and can't see worth a ****...
Last edited by brembo12; 4/22/13 at 02:06 AM.
looks like crap without the quad tips.....hopefully we can roll out a small dent soon with a baseball bat.......... 
4/22/13, 12:06 PM
#289
yeah......thanks I have a new in the box Magnaflow 15589 (single tips) that I have been trying to sell on craigslist Dallas for 575.00. Magnaflow sets the price at 821.00 and will go after you. Mag went to ebay/VERIO and had my ad removed twice!!! ebay going downhill like the rest of the economy.......
so........I have a set of new FORD OEM GT500 quads....one has a small dent.......when I get some time I will get it out
I really like the FRPP quads....but 1000.00!!! http://www.ebay.com/itm/2013-Mustang-Ford-Racing-Shelby-GT500-Sport-Exhaust-Mufflers-w-Quad-Chrome-Tips-/190788703194?pt=Motors_Car_Truck_Parts_Accessories&hash=item2c6be493da&vxp=mtr
Last edited by brembo12; 4/22/13 at 12:08 PM.
9/27/13, 06:02 PM
#291
Mach 1 Member
Join Date: May 31, 2011
Location: Killeen, TX
Posts: 540
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
SMBJoshy
2010-2014 Mustang
2
8/16/15 02:48 PM