Knight

I've always said get AFR heads.... AFR 165's!!! go for it!

future9er24

so many dollars...

I think I'm going to kidnap my neighbors and sell them into slavery. That might get me one AFR head..

Knight

$1379 plus free shipping! yes near 1400 is a lot of money, but not bad compared to head cost in general.

http://cgi.ebay.com/ebaymotors/AFR-S...mZ360095648141

future9er24

Oh yeah, I know they aren't bad compared to other heads, its just heads are alot. I just need to find a way to make that money.

I'll stick some of the old II parts on ebay later this week I think. That should be good for couple hundred. The old carb'd intake, carb, carb spacer, fan(s) (i might just go electric), old heads, 2 sets of useless valve covers, original II grille, turn signals...

but thats not nearly the amount I would need. I could also sell some airsofts I don't use, as well as one of my real guns that I hardly shoot.. Thats about $500 right there

future9er24

I'm also wondering wether a 58cc combustion chamber is good for my motor if I plan on supercharging it. I don't want the C/R to rise to high. The CR will rise to 9.65:1. is that still safe to boost?

I didn't plan on more than like 8psi, with 10psi as my max i would ever run

Knight

I think you will be fine with 8 lbs of boost, and one thing to note, with the amount of airflow the afrs have you can prob run 5-6 lbs and make as much power as 8lbs on stock heads. any amount of volumetric efficency you add N/A will help the car make so much more on boost, so good flowing intake and exhaust 8 psi will make crazy power and 6 will make as much as you would need/want.

1 more thing, people SC 99 cobras to 8-10 psi and those run 9.9:1 stock.

future9er24

That is good to know.I don't have plans for an intake just yet, I'll be using the stockers until I can afford better. The reason I figured heads first is that I'm probably not going to have them off again, and it would be a pain in the *** to get an aftermarket intake, and then remove it later to put on the new heads.

When I get my new intake, I'll JUST be swapping the intake, nothing else.

I also couldnt find a decent EGR plate in the yard, I might have to get an aftermarket TB/EGR combo just to get it out of the way

Knight

one thing that you didn't mention, what are you going to do about cam, lifters, rods, rockers valves and all. can you even use stockers in AFR heads?

future9er24

Supposedly they are some of the best to use on the stock cam because they don't require more lift. I'm sure the heads would benefit from a beefier cam, but I don't think I'll need one

this is one of the threads I was looking at

http://www.allfordmustangs.com/forum...afr-165-a.html


I'm leaving the lifters alone, getting hardened pushrods (because AFR says I should use them, and I've read some posts from people who didn't and seriously ruined their motors) and 1.7 roller rockers.

Knight

Ok awesome!

StangMahn

sounds like you're making some progress

2k7gtcs

progress, that calls for a

2k7gtcs

lowblustang00

I've been lurking and didn't know if you had seen this so I thought I would post. I think it is a little more than what you were talking about spending though.

http://forums.bradbarnett.net/showth...97#post5654797

TDS

Arin has his thoughts else where at the time.
Besides HE IS the BIGGEST POST ***** ON HERE!

OR WANTS TO BE

TDS

future9er24

That would be a nice package if I had the cash to spring for it. Still, I really think the AFR heads are the best heads to get. but thanks for the heads up Much appreciated

As for making this money back, I made up a list of everything I have that I don't need that I could sell for this project. It's a pretty big list

We'll see how well this goes

Autotooner

you could sell me the Bullitt, then completely re-do the II...

future9er24

HA!

Fat chance

cntchds

nevermind

edumspeed

The II will return with a vengeance!