Random pics of your Boss 302
#1021
Shelby GT350 Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: November 20, 2010
Location: Sioux Falls, SD
Posts: 2,384
Likes: 0
Received 1 Like
on
1 Post
Got my Curt weight distribution hitch setup today. Got lucky in that the head tilt I started with was just right. Spent about an hour measuring tongue weight at various car fore/aft positions since my '02 Dakota is rated for 750 lb max tongue weight. Got lots of marks now at 2" intervals so I know what the weight is.
Took my time loading the Boss to make sure I didn't do anything stupid.
Took my time loading the Boss to make sure I didn't do anything stupid.
![Wink](https://themustangsource.com/forums/images/smilies/wink.gif)
#1022
Thanks!
Wait til next weekend when I put the Enkei's on, and load it up again for a road test. I think the pic will look very familiar.
Wait til next weekend when I put the Enkei's on, and load it up again for a road test. I think the pic will look very familiar.
![Icon Mrgreen](https://themustangsource.com/forums/images/smilies/icon_mrgreen.gif)
Last edited by SD GT; 3/25/12 at 07:56 PM.
#1023
Cobra Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Are the "plates" everyone is referring to something you add to block the side exhaust?
If so, what is the benefit in doing that? Increased back pressure?
Are the side exhaust open from the factory, or does the customer have to do anything to open them?
Where do the "plates" install at? Location point on the exhaust system that is?
If so, what is the benefit in doing that? Increased back pressure?
Are the side exhaust open from the factory, or does the customer have to do anything to open them?
Where do the "plates" install at? Location point on the exhaust system that is?
https://themustangsource.com/f813/an...=exhaust+discs
![](https://themustangsource.com/attachments/f813/86500d1303015201t-remove-discs-cimg1039.jpg)
![](https://themustangsource.com/attachments/f813/94982d1318858879t-remove-discs-img_6432_mod2.jpg)
#1024
When I talked to Dave Pericak (chief engineer for the Mustang) at the 2013 Mustang Reveal last November and asked him about how many years the Boss will be sold, all that the company would allow him to say is that "History will repeat itself" -- implying that the Boss 302 will be a 2-year production run (just like 69-70) and that there will be a 1-year run of the Boss 351 (like 71). This is plausible with the new 5.8L engine being in the 2013 GT500 (351ci = 5.75L).
Also, think about it - the NA DOHC 5.4 in the 2000 Cobra R made 385 hp. Extrapolate that to a 5.8 and you get 413.5 hp. Even if the Cobra R was underrated, it's still doubtful that an NA version of the 5.8 in the GT500 could make more than the current Boss 5.0. They would need to adapt the Ti-VCT to the 5.8, improve the heads, come up with a new intake manifold, etc. etc. and it wouldn't be worth it for a 1 year run.
The more likely outcome is that 2014 will be a pretty boring year for changes. The V6, GT and GT500 will just carry over from 2013 and there won't be a Boss. It's just a bridge year until the redesigned 2015 is rolled out.
#1025
Factory exhaust plate I think is a 1/2 hole" One of the TMS members makes larger plates if you want them. His name is Scott
https://themustangsource.com/f813/anyone-interested-after-market-exhaust-discs-494672/?highlight=exhaust+discs
https://themustangsource.com/f813/anyone-interested-after-market-exhaust-discs-494672/?highlight=exhaust+discs
![Thumb](https://themustangsource.com/forums/images/smilies/thumb.gif)
The discs are actually 5/16 opening from the factory. Many people like to take the discs out and run wide open. Others, like myself, did not like the sound without any exhaust disc in place or it was too loud for the owner or neighborhood where they live. I think most agree the factory discs are too small.
The different sizes add a unique sound to the Boss, or as I say they tune the sound to your personal liking. Check out the thread Jerry posted and feel free to ask me any questions.
#1026
Bullitt Member
![](https://themustangsource.com/forums/images/rank.gif)
one quick question if I may. If you change to a 1/2 or 3/4 per say, like I am thinking about getting some, is there any kind of "drone" at all with any of the plates?
#1027
Cobra Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![Nono](https://themustangsource.com/forums/images/smilies/nono.gif)
This would be to loud if I had neighbors close by...
![Biggrinjester](https://themustangsource.com/forums/images/smilies/biggrinjester.gif)
Goats / Chickens / Horses don't seem to mind the growl of the Roadrunner
Or you can spend more money and get the electric exhaust cutouts from QTP.
![](https://www.quicktimeperformance.com/shop/secure/images/categories/407.jpg)
MUSTANG
BOSS 302 KIT
#1028
It is not me or the aftermarket discs to thank for no drone, that is the way the Ford engineers designed the pipes. There is no drone with or without the discs of any size. I am sure they knew many people would run wide open or change the size and took that into account.
#1030
Mach 1 Member
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
this might be early, but i would like to see a pict of a CO 2012 Boss next to a GB 2013 Boss. that might be next color combo in the garage if i could find the $40k to pay for one...
just add it to the wishlist...
just add it to the wishlist...
#1034
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
![](https://themustangsource.com/forums/images/rank.gif)
Not mine... Spotted at the Dallas Auto Show this weekend.
Spotted another white one circling the civic center looking for parking. Was that anyone here?
Spotted another white one circling the civic center looking for parking. Was that anyone here?
![](http://richtrost.smugmug.com/Cars/Car-Shows/Dallas-Auto-Show-March-2012/i-HXm58gm/0/L/IMG7209-L.jpg)
#1035
V6 Member
Join Date: February 22, 2011
Location: Texas
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
I checked out that car too. Had to open the hood to see if it was a low number but it wasn't. The funny part was a guy started talking to my date about how the car came with two keys. She told him I had one just like the one we were looking at. Turns out he was a chevy guy but really loved what he's heard about the Boss and was thinking about getting one. I told him he wouldn't regret it.
#1036
Originally Posted by Mustangfreak
I think you're supposed to stay on the track bud. lol ![Wink](https://themustangsource.com/forums/images/smilies/wink.gif)
![Wink](https://themustangsource.com/forums/images/smilies/wink.gif)
#1038
cf decklid eh
#1039
GT Member
![](https://themustangsource.com/forums/images/rank.gif)
Join Date: May 10, 2011
Location: Austin, TX
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Normally, I wouldn't be so pimpy, but one of the big part warehouses is having a 20% off sale that knocked almost $200 off the price. With junkyard lids going for $450, I decided to make the stretch.
Don't worry, I'm a "man of a certain age" and I don't wear baseball caps backwards or anything like that, so...it will be painted.
Jimmy
Don't worry, I'm a "man of a certain age" and I don't wear baseball caps backwards or anything like that, so...it will be painted.
Jimmy
#1040
Normally, I wouldn't be so pimpy, but one of the big part warehouses is having a 20% off sale that knocked almost $200 off the price. With junkyard lids going for $450, I decided to make the stretch.
Don't worry, I'm a "man of a certain age" and I don't wear baseball caps backwards or anything like that, so...it will be painted.
Jimmy
Don't worry, I'm a "man of a certain age" and I don't wear baseball caps backwards or anything like that, so...it will be painted.
Jimmy