Retrofitting the 4.2 LCD Track Apps cluster
#101
Legacy TMS Member
Thread Starter
What are you looking to add to the clock spring? Is this to make the steering wheel from the 14 fit in 05? Are there enough slots in the connectors for that?
#103
Legacy TMS Member
Thread Starter
The whole column? The entire assembly that houses the clockspring, steering shaft etc? Is this for the 05/09 project or something else? And why the entire column?
#104
Mach 1 Member
1. Swapping in the 13 Gauge cluster in my shelby.
2. Swapping in the 11(and soon to be 13) gauge cluster in a local 05. We are going to try swapping out the entire column to gain the more wires and 11 steering wheel. Still to figure out the rest of it though.
I was wanting the pin part numbers for both.
-Matt
#105
Legacy TMS Member
Thread Starter
You may want to check this thread out, then. akdoggie retrofitted the 2010 and up steering wheel and made the buttons functional. His way may be better than switching out the whole column.
https://themustangsource.com/forums/...o-mods-528705/
https://themustangsource.com/forums/...o-mods-528705/
#107
Mach 1 Member
You may want to check this thread out, then. akdoggie retrofitted the 2010 and up steering wheel and made the buttons functional. His way may be better than switching out the whole column.
https://themustangsource.com/forums/...o-mods-528705/
https://themustangsource.com/forums/...o-mods-528705/
Cheers,
-Matt
#109
GT Member
Just in case someone reading this thread is wanting to do the swap on an auto 11-12, I have a complete 13 auto shifter assembly for sale. Was only on my car for a few months and was purchased new originally. Pm me for price if interested.
Thanks
Thanks
#111
Mach 1 Member
#112
Shelby GT350 Member
#113
Legacy TMS Member
Thread Starter
I found this video on youtube from someone converting a base 13/14 to the track apps. Includes the IDS programming of keys and inputting as built.
https://www.youtube.com/watch?v=in68335Qe2c#t=20
https://www.youtube.com/watch?v=in68335Qe2c#t=20
#114
Shelby GT350 Member
I found this video on youtube from someone converting a base 13/14 to the track apps. Includes the IDS programming of keys and inputting as built.
https://www.youtube.com/watch?v=in68335Qe2c#t=20
https://www.youtube.com/watch?v=in68335Qe2c#t=20
Is it hard to find a dealer that is willing to program the As Built Data? Would they even know what you're talking about?
#115
Mach 1 Member
#116
GT Member
It's been a while since I've been on. If you haven't found the pins yet, here ya go. If you have well here is a reference to them.
Part number for the male pins (www.digi-key.com):
A104905-ND
http://www.digikey.com/scripts/DkSea...9&y=11&cur=USD
Part number for the female pins (www.digi-key.com):
A101884CT-ND
http://www.digikey.com/product-detai...4CT-ND/2700941
#117
Mach 1 Member
It's been a while since I've been on. If you haven't found the pins yet, here ya go. If you have well here is a reference to them.
Part number for the male pins (www.digi-key.com):
A104905-ND
http://www.digikey.com/scripts/DkSea...9&y=11&cur=USD
Part number for the female pins (www.digi-key.com):
A101884CT-ND
http://www.digikey.com/product-detai...4CT-ND/2700941
Part number for the male pins (www.digi-key.com):
A104905-ND
http://www.digikey.com/scripts/DkSea...9&y=11&cur=USD
Part number for the female pins (www.digi-key.com):
A101884CT-ND
http://www.digikey.com/product-detai...4CT-ND/2700941
-Matt
#120
Legacy TMS Member
Thread Starter
http://www.ebay.com/itm/13-14-Ford-Mustang-GT-5-0L-OEM-Speedometer-Cluster-MPH-19K-CRACKED-LENS-/391129141504?&_trksid=p2056016.l4276
Still clusters out there. I just picked another one up for $175.
Still clusters out there. I just picked another one up for $175.