Boss intake and gears
#81
What kinda numbers are u making and have you made it to the track yet?
What front wheel/tire combo do you have up front? Those tires only come in two sizes according to the Toyo website.
#82
GT Member
Join Date: December 2, 2011
Location: Mandeville, La
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
Mike
#83
Mach 1 Member
Join Date: June 17, 2011
Location: Youngstown, Ohio
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
I would buy tires. A good, non-traction impaired launch is one of the easiest ways to make your car quick. Sure, a tune, intake, exhaust or gears are all more "exciting" than tires, but you will wind up picking up more ET at the track with tires/suspension than most bolt-ons will get you. I would get tires, LCAs and LCA relocation brackets.
Mike
Mike
I agree if you want to improve your ET, as well as the feel of your car being fast driving around, a tire that flat hooks is well worth the money. I have 18" ET Street radials, and my suspension is all stock except Eibach lowering springs and I pull consistent 1.6-1.7 60' times. I don't think LCA's and relocation brackets are a "must have". I'm sure they help, but I know for a fact they aren't absolutely necessary for great launches at the track.
#84
GT Member
Thread Starter
Originally Posted by blackgt87
I agree if you want to improve your ET, as well as the feel of your car being fast driving around, a tire that flat hooks is well worth the money. I have 18" ET Street radials, and my suspension is all stock except Eibach lowering springs and I pull consistent 1.6-1.7 60' times. I don't think LCA's and relocation brackets are a "must have". I'm sure they help, but I know for a fact they aren't absolutely necessary for great launches at the track.
#85
Member
Join Date: October 19, 2011
Location: Burleson TX
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Got my Boss intake put on last night. Pretty happy with it so far. I didn't feel much of a loss down low (probably due to the 3.73s). Feels like the car just wants to keep pulling! After we made sure everything was good, took her out for a spin and was shifting at about 7500rpms. I know there are a few that don't like the mod, but I think it will serve me well because I'm not afraid to rev high and I plan on going with a Procharger in the future.
Last edited by KalEl370; 1/22/12 at 06:12 PM. Reason: Typo
#86
GT Member
Thread Starter
Originally Posted by KalEl370
Got my Boss intake put on last night. Pretty happy with it so far. I didn't feel much of a loss down low (probably due to the 3.73s). Feels like the car just wants to keep pulling! After we made sure everything was good, took her out for a spin and was shifting at about 7500rpms. I know there are a few that don't like the mod, but I think it will serve me well because I'm not afraid to rev high and I plan on going with a Procharger in the future.
Keep me up dated on how you like it after a few more days of running with it.
#87
Member
Join Date: October 19, 2011
Location: Burleson TX
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
http://www.latemodelrestoration.com/...ntake-Manifold
Good luck!
#88
GT Member
Thread Starter
Originally Posted by KalEl370
Will do, the cheapest place I found it was at Late Model Restoration. They have it for $399, everywhere else seems to have gone up in price.
http://www.latemodelrestoration.com/...ntake-Manifold
Good luck!
#90
GT Member
Thread Starter
Originally Posted by blackgt87
Tousley Ford is where I got mine. It was by far the best price I could find.
#91
GT Member
Thread Starter
I ordered my boss intake and now the wait is on. Do I need to get the fuel hose set up from late model resto for the passenger side vacum line? And is the install pretty simple. It seems like it on line.
#92
Member
Join Date: October 19, 2011
Location: Burleson TX
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
I got the kit from late model resto. It's only 10 bucks and worked well. We followed the install instructions on the LRS website as well and it went pretty smoothly. Total time to install was about 1 and a 1/2 hours. Good luck!
#93
Mach 1 Member
Join Date: June 17, 2011
Location: Youngstown, Ohio
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I bought the late model resto kit too. I had a little bit of trouble getting that purge solenoid to stay because the pigtail wasnt long enough, but it does technically work.
Also you don't have to disconnect the fuel line from the fuel rail, just pull the rail with the injectors still in it out of the stock intake, and kinda slide the boss intake inbetween the rails then set it on the heads. My fuel line disconnect tool wouldnt fit next to the little bracket mount welded to the fuel rail so I had to get crafty. It isnt any more of a pain, and you dont spill gas. Just pay attention to the heater hoses.
Also you don't have to disconnect the fuel line from the fuel rail, just pull the rail with the injectors still in it out of the stock intake, and kinda slide the boss intake inbetween the rails then set it on the heads. My fuel line disconnect tool wouldnt fit next to the little bracket mount welded to the fuel rail so I had to get crafty. It isnt any more of a pain, and you dont spill gas. Just pay attention to the heater hoses.
#94
GT Member
Join Date: December 2, 2011
Location: Mandeville, La
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
Mike
#95
GT Member
Thread Starter
Thanks for the install info guys. I'll keep y'all updated on it. I plan on getting it dynoed and hitting the strip with the 3.31's before I change gears to see just how she runs as is.
#96
GT Member
Thread Starter
Originally Posted by mbreinin
I think you made a mistake, in all sincerity. However, I admit it looks great and I would thoroughly enjoy being able to zing my motor up to 7600 rpm. Let us know how it works out for you and if you dyno/track the car and the results.
Mike
#97
Mach 1 Member
Join Date: June 17, 2011
Location: Youngstown, Ohio
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
I fought long and hard about it, but I figured I would give it a try and see how it did with my combo. After all I never have a problem with the low end. So losing alittle to gain high end seems like it would be a perfect fit for what I want to do with it. But we will see soon enough. Worst case scenario I wasted 400 bucks, but I can probably resale and get some of my money back.
If its possible run the car at the track before and after. That would be the true test.
I'll never forget the first time I floored my car after switching back to the stock intake lol.
#98
GT Member
Thread Starter
Originally Posted by blackgt87
Identical to what I thought, and what I did as far as gettin most of my money back.
If its possible run the car at the track before and after. That would be the true test.
I'll never forget the first time I floored my car after switching back to the stock intake lol.
I just hope it doesnt disappoint.
#99
Mach 1 Member
Join Date: June 17, 2011
Location: Youngstown, Ohio
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
If you dyno AND run it at the track before and after, then you will know for sure whether or not you are disappointed. I can't wait to see the results!
#100
GT Member
Thread Starter
Originally Posted by blackgt87
If you dyno AND run it at the track before and after, then you will know for sure whether or not you are disappointed. I can't wait to see the results!