2011 Twin Turbo Mustang GT
3/3/12, 07:24 PM
#121
Bullitt Member
Thread Starter
Join Date: October 11, 2007
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
Yes but I'm running super stang and our first round will be really early. Doubt I'll make it pass the first round since I'm sitting at the line kinda long to let it spool. So get there early if you want to see it!
3/4/12, 10:02 AM
#123
Bullitt Member
Thread Starter
Join Date: October 11, 2007
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
Probably wont get vids up until tonight. New best MPH and best Coyote 5.0 MPH of the weekend that I know of. We spun on this pass though. Going to get one more pass later today.
and here is a pic from the starting line
and here is a pic from the starting line
3/5/12, 05:32 AM
#126
Bullitt Member
Thread Starter
Join Date: October 11, 2007
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
Got the videos done. I'd like to give a huge thanks too Jake Long and Jon Lund. Two of the best guys to partner with on a project like this. I'd also like to give a special thanks to Michael at L&M Engines for a badass engine. He made the trip down to Bradenton just to watch what it would do! I'd also like to thank Evolution Performance for having us in their pit in the midway, great hanging out with you guys.
Here is the video
and here is the helmet cam
3/6/12, 08:43 PM
#128
I Have No Life
Dang Ken... those are some sweet passes. I don't think I have ever seen a car launch so quietly and smoothly. It's almost like you're just going from a stoplight, but raking in 1/4's in the 9's.... lol. Is it that smooth all because of the tires??? or just how the power is laid down? Either way. Very nice.
3/7/12, 08:08 AM
#131
Bullitt Member
Join Date: December 17, 2011
Location: Naples, FL
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
hey ken any idea on hours for full install yet? also Is a built block need or could you just swap rods/pistons and crank if you were going with lower pressure like 6-8psi?
3/9/12, 02:44 PM
#132
Bullitt Member
Thread Starter
Join Date: October 11, 2007
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
Dang Ken... those are some sweet passes. I don't think I have ever seen a car launch so quietly and smoothly. It's almost like you're just going from a stoplight, but raking in 1/4's in the 9's.... lol. Is it that smooth all because of the tires??? or just how the power is laid down? Either way. Very nice.
3/9/12, 02:45 PM
#133
Bullitt Member
Thread Starter
Join Date: October 11, 2007
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
Roll bar is done!
Last edited by KenB; 3/9/12 at 02:46 PM.
3/9/12, 09:05 PM
#134
Mach 1 Member
Join Date: March 20, 2011
Location: Bremen, Indiana
Posts: 869
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by KenB
Mostly just because we aren't building boost at the line. When we do, should go 9.0 on the same tune!
3/15/12, 05:57 PM
#136
Bullitt Member
Thread Starter
Join Date: October 11, 2007
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
3/15/12, 05:58 PM
#137
Bullitt Member
Thread Starter
Join Date: October 11, 2007
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
Jake has been getting a lot done on the car for the Texas Mile. I'll have more pictures tomorrow of the new fuel setup.
Put some Brembo's on the front to make sure we can get it stopped
18" Wheels with Hooisers
3/15/12, 06:51 PM
#138
Mach 1 Member
Join Date: March 20, 2011
Location: Bremen, Indiana
Posts: 869
Likes: 0
Received 0 Likes
on
0 Posts
Not yet. We are doing 3 "Alpha" cars starting next month. A Boss, a manual GT and an auto GT. We will probably have pricing once those are done.
Jake has been getting a lot done on the car for the Texas Mile. I'll have more pictures tomorrow of the new fuel setup.
Put some Brembo's on the front to make sure we can get it stopped
18" Wheels with Hooisers
Jake has been getting a lot done on the car for the Texas Mile. I'll have more pictures tomorrow of the new fuel setup.
Put some Brembo's on the front to make sure we can get it stopped
18" Wheels with Hooisers
3/16/12, 04:51 AM
#139
Bullitt Member
Thread Starter
Join Date: October 11, 2007
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts