2010-2014 Mustang Information on The S197 {GenII}

Build, Delivered VIN Sequence

Old Jun 1, 2010 | 09:00 AM
  #261  
kierankelly's Avatar
Bullitt Member
 
Joined: January 26, 2010
Posts: 220
Likes: 0
From: Philadelphia, PA
Originally Posted by 70elimcougar
I got a call from a special customer service agent tues 5/25 saying my car was delayed
again until 6/20. Went on vacation wed, checked my messages and the car showed up
at the dealer. So tues I got all pissed off for no reason. Bottom line: the customer service
people dont know what is going on. I will go inspect my car that was built 4/13 tonight and
pick it up if all is well. All these delays has somewhat soured my excitement....I assume
that will change as soon as I lower the top and fire it up.
My GT was built on 4/13 as well. I picked it up Saturday and have had no issues so far. I'm not expecting any, but just thought I'd throw that out there.

The delays drove me nuts, as my car was delivered last week, but in the end, all of that went away the second I started my Mustang for the first time. I've had a smile on my face all **** weekend.
Reply
Old Jun 1, 2010 | 10:48 AM
  #262  
Zoso's Avatar
Member
 
Joined: April 12, 2006
Posts: 19
Likes: 0
From: Austin, Texas
Count me in...

VIN 1525409
Ordered 4-28-10
Build Date 5-24-10
ETA - Somewhere between 6-7 and 6-18
Reply
Old Jun 1, 2010 | 10:51 AM
  #263  
corvettedreamin's Avatar
Thread Starter
Cobra R Member
 
Joined: April 3, 2010
Posts: 1,814
Likes: 0
From: Northern VA
Originally Posted by Zoso
Count me in...

VIN 1525409
Ordered 4-28-10
Build Date 5-24-10
ETA - Somewhere between 6-7 and 6-18
I don't think that's a valid VIN (last 6) . . . We're seriously not up to 525,409 2011 Mustangs. Perhaps you transposed the first two numbers since I'm 99.9% sure the 7th digit from the end is a 5.
Reply
Old Jun 1, 2010 | 10:55 AM
  #264  
Zoso's Avatar
Member
 
Joined: April 12, 2006
Posts: 19
Likes: 0
From: Austin, Texas
You are correct, sir. Thank you...that goes a long to explaining why I could never see my window sticker.
Reply
Old Jun 1, 2010 | 11:06 AM
  #265  
corvettedreamin's Avatar
Thread Starter
Cobra R Member
 
Joined: April 3, 2010
Posts: 1,814
Likes: 0
From: Northern VA
Originally Posted by Zoso
You are correct, sir. Thank you...that goes a long to explaining why I could never see my window sticker.
So you're good for a window sticker now too? That would be excellent.
Reply
Old Jun 1, 2010 | 11:11 AM
  #266  
Zoso's Avatar
Member
 
Joined: April 12, 2006
Posts: 19
Likes: 0
From: Austin, Texas
Yes sir. Thank you!
Reply
Old Jun 1, 2010 | 11:12 AM
  #267  
jokerstars's Avatar
Mach 1 Member
 
Joined: April 15, 2010
Posts: 999
Likes: 0
From: DC Metro Area
Just called Ford CS. They claimed my car was "in production" but said they had no ETA and that I should contact my dealer.

Jonny says my ETA is June 14 though, so maybe they're lying to me? Yar.
Reply
Old Jun 1, 2010 | 11:14 AM
  #268  
corvettedreamin's Avatar
Thread Starter
Cobra R Member
 
Joined: April 3, 2010
Posts: 1,814
Likes: 0
From: Northern VA
Originally Posted by jokerstars
Just called Ford CS. They claimed my car was "in production" but said they had no ETA and that I should contact my dealer.

Jonny says my ETA is June 14 though, so maybe they're lying to me? Yar.
"Contact your dealer" is the party line as of about 2.5 weeks ago.
Reply
Old Jun 1, 2010 | 11:22 AM
  #269  
Lancel's Avatar
Mach 1 Member
 
Joined: April 22, 2010
Posts: 903
Likes: 0
Originally Posted by jokerstars
Just called Ford CS. They claimed my car was "in production" but said they had no ETA and that I should contact my dealer.

Jonny says my ETA is June 14 though, so maybe they're lying to me? Yar.
I think Ford CS got all their database privileges cut, so all they can get is the car's status now. Either that, or someone up high told them to stop giving info out.
Reply
Old Jun 1, 2010 | 11:50 AM
  #270  
Ronn's Avatar
GT Member
 
Joined: May 8, 2010
Posts: 156
Likes: 0
From: Marshall
Yeah i have heard a different tone from CS also. Hey its June 1, my ETA day. Ronn
Reply
Old Jun 1, 2010 | 01:23 PM
  #271  
kierankelly's Avatar
Bullitt Member
 
Joined: January 26, 2010
Posts: 220
Likes: 0
From: Philadelphia, PA
My car was built 4/13, first ETA of 4/30, bumped back to 5/6 and still showed that date when it was delivered on 5/25. The delivery seems to be about a month behind for most people on here. Hopefully they're getting caught up and those shipping times will come down.
Reply
Old Jun 1, 2010 | 03:17 PM
  #272  
GRABOID's Avatar
Bullitt Member
 
Joined: May 15, 2010
Posts: 334
Likes: 0
From: Arkansas
Originally Posted by PTRocks
As far as I can tell, the bracket arrives in the trunk for dealer install, so you just need to make sure they don't do it as part of the dealer prep.

I think so also. And it has been made clear at the dealership lol. The same guy I bought my Bullitt from heard the tone of my voice when I said the window sticker said front bracker and assured me no bracket, frame or any stickers would be put on it lol. He said you want it clean just like the Bullitt and i said yep.
Reply
Old Jun 1, 2010 | 03:20 PM
  #273  
GRABOID's Avatar
Bullitt Member
 
Joined: May 15, 2010
Posts: 334
Likes: 0
From: Arkansas
Originally Posted by jokerstars
Just called Ford CS. They claimed my car was "in production" but said they had no ETA and that I should contact my dealer.

Jonny says my ETA is June 14 though, so maybe they're lying to me? Yar.
Dealer will get a call when car is finished and should call you with an ETA.
Reply
Old Jun 1, 2010 | 07:30 PM
  #274  
montreal ponies's Avatar
Team Mustang Source
 
Joined: January 30, 2004
Posts: 3,738
Likes: 0
From: Montreal
Things are smooth sailing over here. Got my window sticker.
Reply
Old Jun 1, 2010 | 07:36 PM
  #275  
Racin Randy's Avatar
Member
 
Joined: May 31, 2010
Posts: 37
Likes: 0
From: Dallas Texas
125477

VIN # 125477
Ordered May 5th, 2010
Built May 25th, 2010

Estimated delivery to dealer (Dallas Texas area), June 14th - 25th.
Reply
Old Jun 1, 2010 | 08:52 PM
  #276  
corvettedreamin's Avatar
Thread Starter
Cobra R Member
 
Joined: April 3, 2010
Posts: 1,814
Likes: 0
From: Northern VA
Originally Posted by GRABOID
Dealer will get a call when car is finished and should call you with an ETA.
Um, no. AAI does not call every dealer for every car and let them know it was built. It's incumbent upon the dealer/fleet manager/inventory manager to check.
Reply
Old Jun 2, 2010 | 07:18 AM
  #277  
bluestang's Avatar
Member
 
Joined: April 20, 2010
Posts: 10
Likes: 0
From: WV
Vin# 131040
Ordered 5/19/10
build date 6/11/10
Reply
Old Jun 2, 2010 | 07:27 AM
  #278  
Racin Randy's Avatar
Member
 
Joined: May 31, 2010
Posts: 37
Likes: 0
From: Dallas Texas
VIN 125477

BTW: 125477 will be a GT500 Convertible, SVT PP, Electronics Package in Sterling Grey with the Red Stripes..............you know, the color that noone likes......................except me.

Managed to find a dealer that let me have it for under M.S.R.P.

Racin Randy
Reply
Old Jun 2, 2010 | 07:35 AM
  #279  
corvettedreamin's Avatar
Thread Starter
Cobra R Member
 
Joined: April 3, 2010
Posts: 1,814
Likes: 0
From: Northern VA
Just an update (and why I haven't updated the list recently) . . . I'm working on a method for aggregating production information into a nice little report that tells us how many of each model (coupe, convertible, GT, V6, GT500) are being made and how many "missing" VINs there are.
Reply
Old Jun 2, 2010 | 10:14 AM
  #280  
Goldwing's Avatar
V6 Member
 
Joined: April 7, 2010
Posts: 88
Likes: 0
From: Iowa
Originally Posted by corvettedreamin
Just an update (and why I haven't updated the list recently) . . . I'm working on a method for aggregating production information into a nice little report that tells us how many of each model (coupe, convertible, GT, V6, GT500) are being made and how many "missing" VINs there are.
Settle down, your going to drive yourself nuts! Hang in there, the car will show up and you won't have time to do your report, you will be driving it all the time.
CS sent me an email yesterday telling me that they checked into where my car was and found out I had picked it up last Friday! I guess if you wait long enough they will give you the answer you want!
Good luck
Tom
Reply

Thread Tools
Search this Thread

All times are GMT -6. The time now is 04:06 AM.