tmcolegr...... I sent you a PM , I could use those instructions
Pls email me..

 

FYI complete Homelink programming instructions can be found at this address.

http://www.homelink.com/home/home.tml

 

FYI - I installed a autodimming mirror from 90's Cadillac and just tapped the power wire for the mirror into the black/blue stripe wire and the ground into the solid black wire. Everything works fine-no troubles. The factory service manual shows the black/blue stripe as a constant hot wire and the solid black as a ground.

Rob

 

I finally installed my Gentek G50 with compass/temp/and Homelink! What a PITA this was.

Since I have a vert the process was a little different - no headliner to hide that large, bricklike Molex connector built in to the wiring harness. I had to lunch it and solder/heatshrink the wires in order to lower the profile of the wiring harness.

I have a RED wire (switched power supply) and a YELLOW wire (no idea) in the harness. The manual sucks. There is no reference to a YELLOW wire for a setup without map lights (which I don't have.)

Talk about crypic instructions.

Electrochromatic works great. The vacuum fluorescent display could be a bit brighter though. Also, the Homelink buttons aren't lit - at night I can't see where to press to open my garage door!!! WTF?

 

I second the garage door button lights. What were they thinking?

Jon